YAY, fixed it myself
Topic: Miner not working (Read 2950 times)
bumb
how do I reinstall it?
generally by having it installed?
its a library, not really an 'enable'.
its a library, not really an 'enable'.
So...
How the f*ck do I enable OpenCL again?
Grtz
How the f*ck do I enable OpenCL again?
Grtz
ah, thought you were using the GUI miner since you mentioned a checkbox... :p nevermind then.
huh?
I'm using poclbm
I'm using poclbm
if you are still using a GUI miner.. id suggest going straight to commandline.. the less possible causes the better.. then once you get that working, try to move back to the GUI miner.
The open CL box is not ticked ....
Something is wrong with the drivers...
Something is wrong with the drivers...
what do you mean by 'not enabled'?
yep , OpCL is not enabled...
How do I enable this WITHOUT a clean install?
(0.1 TBC reward)
How do I enable this WITHOUT a clean install?
(0.1 TBC reward)
I'm not home at the moment.
I'll try that when I get home , if you're right, I owe you 0,1 bitcoin
I'll try that when I get home , if you're right, I owe you 0,1 bitcoin
does it say you have OpenCL enabled when you monitor your card? Maybe this is the problem: http://www.geeks3d.com/20091221/how-to-enable-opencl-support-on-nvidia-and-amd-platforms/
not remote desktop...
Is there any fix ?
For the Nvidia drivers?
Is there any fix ?
For the Nvidia drivers?
what cards do u have now
managed to make a screenshot of the problem:
File " ....
....
...
File" pyopencl\_cl.pyo", line 10 in __load
ImportError: DLL load failed
That to do?
File " ....
....
...
File" pyopencl\_cl.pyo", line 10 in __load
ImportError: DLL load failed
That to do?
Sounds like it could be failing to load the graphics drivers.... you're not remote desktoped into the box are you?
managed to make a screenshot of the problem:
File " ....
....
...
File" pyopencl\_cl.pyo", line 10 in __load
ImportError: DLL load failed
That to do?
File " ....
....
...
File" pyopencl\_cl.pyo", line 10 in __load
ImportError: DLL load failed
That to do?
just found out:
Tried phoenix,
Didn't work,
same shutdown as poclbm....
Grtz
xioros
Tried phoenix,
Didn't work,
same shutdown as poclbm....
Grtz
xioros
note:
I did install an Nvidia 9500 GT for physx ( uninstalled right now)
I did install an Nvidia 9500 GT for physx ( uninstalled right now)
everything worked fine, until yesterday, it just doesn't want to start anymore...
1x 6950 2GB
Deepbit account works....
Did a reboot, not fix
1x 6950 2GB
Deepbit account works....
Did a reboot, not fix
personally i use something similar to this in a batfile in the poclbm dir
start /NORMAL poclbm.exe -d 0 -w128 -f 30 -v --user=**** --pass=**** -o btcmine.com -p 8332
start /NORMAL poclbm.exe -d 0 -w128 -f 30 -v --user=**** --pass=**** -o btcmine.com -p 8332
Everything looks good on your command line..
Have you tried other miners?
I'd say try out the GUIminer listed on these forums (to eliminate anything going wrong with your c/line args).
GUIminer uses poclbm as well.
Is/are your GPU(s) configured correctly for mining (opencl)
What card(s) are you using?
Is there an error on the cmd line? -Does it report anything at all?
Is your account new on deepbit (is it verified?)
-theres a ton of stuff that could be causing errors and not much to go on from your post.
Have you tried other miners?
I'd say try out the GUIminer listed on these forums (to eliminate anything going wrong with your c/line args).
GUIminer uses poclbm as well.
Is/are your GPU(s) configured correctly for mining (opencl)
What card(s) are you using?
Is there an error on the cmd line? -Does it report anything at all?
Is your account new on deepbit (is it verified?)
-theres a ton of stuff that could be causing errors and not much to go on from your post.
Is poclbm a GPU miner? (sorry, I've never used it).
Has you're machine rebooted since it last ran? Are you trying to load it via Remote Desktop? Is there a monitor plugged into the video card?
I know RDP unloads the video drivers, and thusly renders OpenCL useless. From my mining machine I use UltraVNC to remote into it. I don't know if this is at all related to what you are experiencing, but just my gut feelings.
Has you're machine rebooted since it last ran? Are you trying to load it via Remote Desktop? Is there a monitor plugged into the video card?
I know RDP unloads the video drivers, and thusly renders OpenCL useless. From my mining machine I use UltraVNC to remote into it. I don't know if this is at all related to what you are experiencing, but just my gut feelings.
If you call up an auto repair shop and tell them "my car doesn't work" what do you think their response would be?
Help us help you.
Help us help you.
anyone?
I thought this forum was populated...
Donating 0.1 BTC to the one who fixes this...
The miner lunches and instantly shuts down
I thought this forum was populated...
Donating 0.1 BTC to the one who fixes this...
The miner lunches and instantly shuts down
need quick help :s
start /DC:\bitcoin\poclbm poclbm.exe -d0 --host=deepbit.net --port=8332 --user="****" --pass="****"
This is my command like , but it wont work since today...
What's wrong?
Grtz
Xioros
This is my command like , but it wont work since today...
What's wrong?
Grtz
Xioros
Jump to: