but what of the speed? for example nvidia GTX1070, GTX1060? or AMD RX570, RX580? and what kind of fee?
Topic: Miner ScherKhan for AMD and NVIDIA (Read 294 times)
So far I can not say neither good nor bad. I'm testing.
The irony is justified) I accept)
Well, all the same guys, when a new car is invented, like the old one, same round wheels, an iron casing, an engine, the basis is basically the same. All the changes in the details and not everything is visible from the outside. And you already ride on this or that, choose something that is more convenient and comfortable for you. I apologize for the analogy, but I think it will be more understandable
Thank you for attention)
Well, all the same guys, when a new car is invented, like the old one, same round wheels, an iron casing, an engine, the basis is basically the same. All the changes in the details and not everything is visible from the outside. And you already ride on this or that, choose something that is more convenient and comfortable for you. I apologize for the analogy, but I think it will be more understandable
Thank you for attention)
and what is yours in that "creation"?
Hmm, EthDcrMiner64... where did I see that already? xD
Hello dear Forum members. I decided to share my creation. It is written for a long time, so I can say with confidence that it is tested in practice. During this time, a lot of adjustments and adjustments were made. But still I do not stand still and work on it continues. New versions will be laid out in this topic.
Windows version
Configuring ScherKhan for AMD and NVIDIA
Installing and configuring the ScherKhan AMD and NVIDIA miner is easy to connect in my opinion. I hope that after reading the post, it will become your favorite program for mining on the algorithm of Ethash, on which coins are tossed:
Ethereum (ETH)
EthClassic (ETC)
PIRL
Musicoin (MUSIC)
Expanse (EXP)
Ubiq (UBQ)
Soilcoin (SOIL)
This miner works on AMD and Nvivdia graphics cards, which makes life easier for everyone. Its main qualities are stability and convenience.
Installation
Unpack the file to your convenience. I usually leave on the desktop.
Setting up a batch file for mining
We find the file start.bat at the very bottom, and right click on it and select "Edit"
Next, set it up under our crypt, which we will dig our farms.
To start, you need to make a purse address on the Cryptopia stock exchange. Choose Balances, then find the coin we need.
Copy and change (here it is red) in the sample:
EthDcrMiner64.exe -epool pirl.baikalmine.ru:4444 -ewal 0xf8be0de0675cd13486fac83d97303c18d06fc03d -epsw x -eworker Name-rig -allpools 1 -nofee 1
pirl.baikalmine.ru:4444 - here is the site address and port 4444, if your power is less than 100 mh / s, and if there is more, then prescribe 8008.
In the "-worker" command - write the name of your vorker, above is "Name-rig".
The command "-nofee 1" disables the Devfee commission for the developer, but then the hashed decreases by 2-3 percent. The default is -nofee 0.
The batch file for the Ethereum Classic (ETC):
EthDcrMiner64.exe -epool etc.baikalmine.com:8008 -ewal 0x1ce067b18dc07b031b9e9d8ae08c4106d11b2a14 -eworker rig1
In order not to constantly change the Dag-file (1.12 gigabytes) in the program, when the Defee commission is turned on, Dagfiler Ether (2.5Gb) is loaded, and then a download less than 1.12Gb in size starts a minute ago. This takes additional time, and sometimes at this time the graphics card starts to take off, if there is a small overclocking.
If this does not bother you, and arranges the default work, then just delete this command.
On the bullet you Wallet Wallet paste into the search, your account will open where you can see the statistics.
Creating a batch file
If you need to create a new one for future switching from one coin to another, then you need to create a new one. And since you can configure the existing start.bat for yourself and the mine, which is already in the folder.
But if you still need it, then right click in the folder and click on "Create". Then click on "Text document".
Rename the name. I called it Ethereum.bat, then the "Enter" button and click on "YES"
Under the Ethereum
It's almost the same, just use another ethermine pool and use another exchange, like Yobit or the one you like best.
Balances.
ETH and click on the plus.
A long purse address will appear for replenishment.
Sample:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x000abcc20237f2cf4aed3057c8d2e8c4da30de08.rid2 -epsw x
We write the address, and after the point the worker name is written, I called it rid2. You can enter 6x1060 or any other name.
MEGA: https://mega.nz/#!PapHFBib!OmCR4QUv4Wj7zMaukMG_a5HOD5jwnBUnN-77evaP6Gs
Windows version
Configuring ScherKhan for AMD and NVIDIA
Installing and configuring the ScherKhan AMD and NVIDIA miner is easy to connect in my opinion. I hope that after reading the post, it will become your favorite program for mining on the algorithm of Ethash, on which coins are tossed:
Ethereum (ETH)
EthClassic (ETC)
PIRL
Musicoin (MUSIC)
Expanse (EXP)
Ubiq (UBQ)
Soilcoin (SOIL)
This miner works on AMD and Nvivdia graphics cards, which makes life easier for everyone. Its main qualities are stability and convenience.
Installation
Unpack the file to your convenience. I usually leave on the desktop.
Setting up a batch file for mining
We find the file start.bat at the very bottom, and right click on it and select "Edit"
Next, set it up under our crypt, which we will dig our farms.
To start, you need to make a purse address on the Cryptopia stock exchange. Choose Balances, then find the coin we need.
Copy and change (here it is red) in the sample:
EthDcrMiner64.exe -epool pirl.baikalmine.ru:4444 -ewal 0xf8be0de0675cd13486fac83d97303c18d06fc03d -epsw x -eworker Name-rig -allpools 1 -nofee 1
pirl.baikalmine.ru:4444 - here is the site address and port 4444, if your power is less than 100 mh / s, and if there is more, then prescribe 8008.
In the "-worker" command - write the name of your vorker, above is "Name-rig".
The command "-nofee 1" disables the Devfee commission for the developer, but then the hashed decreases by 2-3 percent. The default is -nofee 0.
The batch file for the Ethereum Classic (ETC):
EthDcrMiner64.exe -epool etc.baikalmine.com:8008 -ewal 0x1ce067b18dc07b031b9e9d8ae08c4106d11b2a14 -eworker rig1
In order not to constantly change the Dag-file (1.12 gigabytes) in the program, when the Defee commission is turned on, Dagfiler Ether (2.5Gb) is loaded, and then a download less than 1.12Gb in size starts a minute ago. This takes additional time, and sometimes at this time the graphics card starts to take off, if there is a small overclocking.
If this does not bother you, and arranges the default work, then just delete this command.
On the bullet you Wallet Wallet paste into the search, your account will open where you can see the statistics.
Creating a batch file
If you need to create a new one for future switching from one coin to another, then you need to create a new one. And since you can configure the existing start.bat for yourself and the mine, which is already in the folder.
But if you still need it, then right click in the folder and click on "Create". Then click on "Text document".
Rename the name. I called it Ethereum.bat, then the "Enter" button and click on "YES"
Under the Ethereum
It's almost the same, just use another ethermine pool and use another exchange, like Yobit or the one you like best.
Balances.
ETH and click on the plus.
A long purse address will appear for replenishment.
Sample:
EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x000abcc20237f2cf4aed3057c8d2e8c4da30de08.rid2 -epsw x
We write the address, and after the point the worker name is written, I called it rid2. You can enter 6x1060 or any other name.
MEGA: https://mega.nz/#!PapHFBib!OmCR4QUv4Wj7zMaukMG_a5HOD5jwnBUnN-77evaP6Gs
Jump to: