Author

Topic: miner shutting down (Read 1200 times)

sr. member
Activity: 378
Merit: 250
November 17, 2013, 09:56:00 AM
#12
no errors-- but after further investigation  I noticed its powering off early inn the morning when the swimming pool filter automatically turns on. Not every morning but maybe every other morning

You can consider buying yourself a power surge protector, you can get a really cheap (about 20$) which is good here http://www.belkin.com/us/BSQ700-06-Belkin/p/P-BSQ700-06%3bjsessionid=0945DEAE96F30A52932A2265E7846A24/
full member
Activity: 214
Merit: 100
November 17, 2013, 05:51:22 AM
#11
no errors-- but after further investigation  I noticed its powering off early inn the morning when the swimming pool filter automatically turns on. Not every morning but maybe every other morning

Haha, so its power issues hm.... sounds like voltage instability to me...
legendary
Activity: 2114
Merit: 1005
ASIC Wannabe
November 16, 2013, 02:11:33 PM
#10
Sell all your hardware and switch to cloud mining, its much better. You can sell your gh at any time or buy more and it starts mining for you instantly. It pays into your account per block and you get paid in BTC, NMC, IXC and DVC. To start mining just click in my signature below Smiley

asshat...how are you allowed out of the noobie board?
sr. member
Activity: 260
Merit: 250
November 16, 2013, 01:51:46 PM
#9
no errors-- but after further investigation  I noticed its powering off early inn the morning when the swimming pool filter automatically turns on. Not every morning but maybe every other morning
full member
Activity: 188
Merit: 100
November 16, 2013, 12:53:45 PM
#8
I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions

Apart from power supply problems, did you check the temperature? It might be overheating...

also possible that it runs hotter then the other one.  taking the case off and adding a fan to the side is a cheap fix

Yes, you can also try this method first which is the easiest...
legendary
Activity: 4116
Merit: 7849
'The right to privacy matters'
November 16, 2013, 10:30:29 AM
#7
I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions

Apart from power supply problems, did you check the temperature? It might be overheating...

also possible that it runs hotter then the other one.  taking the case off and adding a fan to the side is a cheap fix
sr. member
Activity: 286
Merit: 250
November 16, 2013, 09:23:52 AM
#6
I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions

Apart from power supply problems, did you check the temperature? It might be overheating...
legendary
Activity: 4116
Merit: 7849
'The right to privacy matters'
November 16, 2013, 06:40:44 AM
#5
I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions

Check on your power supply, usually thats the problem...

this  .  what are you using to power the little singles? if it is the stock power supplies they are not that good. If you are in the usa pm me I have a ton of used but good pus's.  if you want a new psu I have a lot of links for low cost psu's
sr. member
Activity: 378
Merit: 250
November 16, 2013, 01:04:45 AM
#4
I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions

Check on your power supply, usually thats the problem...
sr. member
Activity: 255
Merit: 250
November 16, 2013, 12:17:04 AM
#3
I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions

Did it come out any errors before shutting down?
member
Activity: 84
Merit: 10
November 15, 2013, 12:42:54 PM
#2
Sell all your hardware and switch to cloud mining, its much better. You can sell your gh at any time or buy more and it starts mining for you instantly. It pays into your account per block and you get paid in BTC, NMC, IXC and DVC. To start mining just click in my signature below Smiley
sr. member
Activity: 260
Merit: 250
November 15, 2013, 12:39:25 PM
#1
 I'm running  two  30 g bfl miners and 10 block erupters   with a Pi ---  and 20 erupters on  another Pi    i'm using  d link  hub for most erupters  and an orion 10 hub-----  is working great but every 2 days or so one of the pi miners  shuts down  any suggestions
Jump to: