Topic: Miner thread hangs, needs to restart miner! (Read 1448 times)
yeah but it seems that this is happened only on windows 10, my other pc that run on windows 7 never had this problem.. anybody have solution?
Got the same problem, but my miner didnt even start mining just this:
ETH: 1 pool is specified
Main Ethereum pool is eu2.ethermine.org:4444
DCR: 5 pools are specified
Main Decred pool is yiimp.ccminer.org:4252
No AMD cards in the list.
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...
NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1050 Ti, 4036 MB available, 6 compute units, capability: 6.1
GPU #1: GeForce GTX 1050 Ti, 4038 MB available, 6 compute units, capability: 6.1
Total cards: 2
ETH: Stratum - connecting to 'eu2.ethermine.org' <94.23.36.128> port 4444
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
DCR: Stratum - connecting to 'yiimp.ccminer.org' <92.171.9.84> port 4252
GPU0 t=42C fan=0%, GPU1 t=37C fan=0%
GPU0 t=42C fan=0%, GPU1 t=37C fan=0%
GPU0 t=41C fan=0%, GPU1 t=37C fan=0%
GPU0 t=41C fan=0%, GPU1 t=37C fan=0%
Miner thread hangs, need to restart miner!
ETH: 1 pool is specified
Main Ethereum pool is eu2.ethermine.org:4444
DCR: 5 pools are specified
Main Decred pool is yiimp.ccminer.org:4252
No AMD cards in the list.
Driver 368.81 is recommended for best performance and compatibility
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...
NVIDIA Cards available: 2
CUDA Driver Version/Runtime Version: 8.0/8.0
GPU #0: GeForce GTX 1050 Ti, 4036 MB available, 6 compute units, capability: 6.1
GPU #1: GeForce GTX 1050 Ti, 4038 MB available, 6 compute units, capability: 6.1
Total cards: 2
ETH: Stratum - connecting to 'eu2.ethermine.org' <94.23.36.128> port 4444
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333
DCR: Stratum - connecting to 'yiimp.ccminer.org' <92.171.9.84> port 4252
GPU0 t=42C fan=0%, GPU1 t=37C fan=0%
GPU0 t=42C fan=0%, GPU1 t=37C fan=0%
GPU0 t=41C fan=0%, GPU1 t=37C fan=0%
GPU0 t=41C fan=0%, GPU1 t=37C fan=0%
Miner thread hangs, need to restart miner!
I exactly have the same problem. Im searching for so long and couldnt find any solution for this shit...
Ran into the same exact problem today twice...The first time my rig was running for 22 hours without any issues then I noticed it was hung up, once I pressed the enter key I got the same error you did and then it restarted. The second time it was about an hour later and the same thing happened, i waited about 20 minutes just to see if it would restart automatically but it didnt, I had to press the enter key to get it to restart, probably any key will work but I happen to press the enter key. Havnt encountered this before.
Hello,
I have a rig with 6 GPU (MSI RX570 Armor and Gigabyte RX580 Aorus)
When i start mining after a while it stops mining and dos screen freezes,
When i realize it freezed i press enter and it gives "Miner thread hangs, needs to restart miner!" error and restarts,
Anybody have idea why i get such error?
I have a rig with 6 GPU (MSI RX570 Armor and Gigabyte RX580 Aorus)
When i start mining after a while it stops mining and dos screen freezes,
When i realize it freezed i press enter and it gives "Miner thread hangs, needs to restart miner!" error and restarts,
Anybody have idea why i get such error?
Jump to: