Topic: [MinerEU] Gridseed G-Blade Raspberry PI Scripta setup script (Read 9897 times)

yea i would say it needs re compiling hope the dev sees this as theres not many people with the old pies now and this software is brilliant

I have no direct experience with this but looking at the dates on the earlier threads I would say it wont work on a Pi 2 or 3, most of that stuff was built for the earlier units since most use the SPI bus the base address are different and software has to be recompiled to work with newer Pis, could be wrong but my guess anyway.

sorry to bring up a old thread but i cant for the life of me install any working image on the raspberry pi 3 is there a diff way to do it all images appart from minera works

UPDATE:

I corrected this by allowing the SCRIPTA OS to load before updating it, I modified the watchdog.conf file & placed a # sign before
the "test-binary = /opt/scripta/bin/wdog.py" line "watchdog-device = /dev/watchdog" line in the watchdog.conf file.
After logging in as "root" & the default passwd: "scripta" I edited the file using the following command:
"nano /etc/watchdog.conf" (without quotes).

Now the commented out lines in the watchdog.conf file look like this:
#test-binary = /opt/scripta/bin/wdog.py
#watchdog-device = /dev/watchdog.

Then I proceeded to use your update command.

MinerEU this is for you:
Your Youtube videos concerning Scripta & the Raspberry Pi Model B are very good.  The one major problem a Linux rookie like myself has is that the Watchdog reboot Loop the my Raspberry gets stuck in makes this whole thing useless.  I'm not fast enough to edit that /opt/watchdog.conf file to stop the constant rebooting.  Any fixes or thoughts?  Thanks.

MinerEU.com will start distributing the A2 based prototype G-BOX to very limited customers (mainly mining farms) from next week.
MinerEU will also announce promotion on G-Blade soon.

Thanks, but running it with cgminer 3.7.2 is really boring. I haven't real hashrate, local and remote ones are completely different and there isn't a way to adjust freq per device. Then cgminer seems to drops down hashrate after few hours without any way to re-gain it (you have to restarting it).
I think I will remain with the amazing cpuminer from Sandor (with per dev/proc freq, autotune and more features), that's the really best miner software I ever tried.

https://github.com/siklon/cpuminer-gc3355

as posted in another forum by minereu.com

+ 1 ...

:-)

I was using scripta from mox235 with gridseed (5 chips) from a rpi but I had hang problems with cgminer. What is your workaround to fix that?
I will try your fork soon.
Thanks

I am using it.

The static graphs are hosed on my installation, but other than that it is running fairly well.

Started from a "new" install of wheezy.  I was testing out cpuminer.  Ran your script over top of this, and it ran with no issues.

Just keeps rebooting endlessly for me.  

Edit: Managed to stop it rebooting by disabling watchdog:

"Once the watchdog is enabled, it is possible to get in a reboot loop. If this happens, disable the system watchdog by quick edit of /etc/watchdog.conf after boot and comment out watchdog-device = /dev/watchdog. The cgminer API based watchdog script can be disabled by using the UI checkbox or commenting out test-binary = /opt/scripta/bin/wdog.py in the same config file. You will have about 30 seconds each loop to try and unscrew things."

Will report back on the stability later...

Seems need a bump. anyone mining with a pi?

Hi, Guys, As you all know, http://www.lateralfactory.com/scripta/ is very good.
As Gridseed G-Blade becomes scrypt mining main stream, scrypta has not updated too much to support the G-Blade and there are a few bugs which stops us from mining with Raspberry Pi.

We at minereu.com have done some research and have put together this little script that would help you mine happily with G-Blade .

Improvements merged from other people:

1, cgminer update: cgminer was able to mine , but can not report correct hash rate on interface. when you attach to it with screen -x, you can't see correct hash rate for G-Blade. also, the API interface is not supporting Scrypt very well some of the stats are not reflected correctly.
Credit to https://github.com/jmordica as we forked his version and to https://github.com/mox235 as we merged his API fix so scripta can correctly report hash rate.

2, scrypta update:
credit to https://github.com/mox235 because we merged his update to support detailed configuration from scrypta for G-Blade miner

3, Raspberry pi hanging /stuck bug: for those of you who try to mine with cgminer, it hangs after a little while or few hours. this is due to a memory paging issue. and we adopted a workaround to fix it.

4, a bash script that setup your existing pi without you have to download a image . just use following command to run the script on your pi:


5, automatically start mining when your power is on Pi . (Scrypta already support this, we just modified a little bit on the start script)


If you have any thing to feedback to us, please just comment on this thread. 

BTW, if you are running a PC with Debian/Ubuntu, the script will try to download cgminer and compile it for your OS. so it will also work for PC.

How to use:
1, run this script and wait for it to finish. once it is done , you should be able to connect to your pi through
https://ipaddress

2, login with password: scripta

3, Pools and workers are predefined as MinerEU's test values,  please change it to your own and save and then restart.

Of course, if you are kind enough to run a clean install and provide an image for everyone to download that would be very nice of you.