Author

Topic: miners running wirelessly in an outbuilding? (Read 1169 times)

member
Activity: 119
Merit: 10
February 12, 2015, 08:09:25 PM
#12
don't know this might help you find the right powerline adapter http://www.cnet.com/topics/networking/best-networking-devices/power-line-adapters/ Good luck
legendary
Activity: 1218
Merit: 1001
February 12, 2015, 07:30:32 PM
#11
I run a powerline adapter from inside my garage to the house.  Works like a charm.  The plug you use should not have a switch or be spliced or be part of other chains. 

modem->router->Powerline Adapter->Garage->powerline adapter->48port switch->miner

+1 different brands, but same results
member
Activity: 72
Merit: 10
February 12, 2015, 04:30:45 PM
#10
I run a powerline adapter from inside my garage to the house.  Works like a charm.  The plug you use should not have a switch or be spliced or be part of other chains. 

modem->router->Powerline Adapter->Garage->powerline adapter->48port switch->miner
hero member
Activity: 637
Merit: 502
February 12, 2015, 04:24:33 PM
#9

Almost all routers can be turned into an access point.  Example: https://blogs.oracle.com/simonthorpe/entry/configuring_a_dlink_dir_655_as

Also I think you can buy a simple USB dongle to connect the SP20 to your wifi. Check that first if you only plan to connect 1 SP20.

hero member
Activity: 637
Merit: 502
legendary
Activity: 2408
Merit: 1102
Leading Crypto Sports Betting & Casino Platform
February 12, 2015, 12:09:40 PM
#6
Just wondering if it's possible to run a miner (notably an sp20) remotely in an outbuilding with wifi access to my router?  How would this be done?

I've done this as well in my detached garage, just get a wireless extender and hook it up to a cheap switch in your outbuilding then use the network ports on your switch to connect to the miners.  Its mindlessly simple to achieve.
legendary
Activity: 784
Merit: 1000
February 12, 2015, 02:38:36 AM
#5
I was doing it in 2011. You need a wireless access point.

https://bitcointa.lk/threads/mining-rig-outside-the-house.23870/

Did that forum stop working in 2014?
hero member
Activity: 637
Merit: 502
February 11, 2015, 10:52:15 PM
#4
I was doing it in 2011. You need a wireless access point.

https://bitcointa.lk/threads/mining-rig-outside-the-house.23870/
newbie
Activity: 15
Merit: 0
February 11, 2015, 10:29:02 PM
#3
would a 150mbps access point be enough? And I can't just plug the miner into the access point, I need a hub too?
legendary
Activity: 1218
Merit: 1001
February 11, 2015, 10:20:05 PM
#2
yes it works.  Use an access point and plug it into a hub.  Plug sp20 into hub. As long as you have power in the outbuilding and strong enough signal from wireless, you are good to go.  I've had 8 s-1 units running that way last year.
newbie
Activity: 15
Merit: 0
February 11, 2015, 10:14:13 PM
#1
Just wondering if it's possible to run a miner (notably an sp20) remotely in an outbuilding with wifi access to my router?  How would this be done?
Jump to: