Topic: mini rig setup need help! (Read 997 times)
Just keep restarting the mining software until all 0 - 7 show up. This happens all the time and is not the fault of the mining software or external hardware. The same behavior occurs for me whether in linux or windoze, whether using cgminer or bfgminer. Think they got the internal USB hub from kmart and the engines themselves can be flakey. Enjoy the heatwave when all 8 engines are nice and toasty.
If there was only a company you could call that supports this type of hardware...
Hahaha, we've got a comedian here!
If there was only a company you could call that supports this type of hardware...
I have installed ftdi driver,but my laptop just detected com3,4,5,6,7,,,,,,,there's com0,1,2 missing,
what should I do,thanks in advance!
ps:how to start that shitty linux 7,do I need open the case and press the power button?
what should I do,thanks in advance!
ps:how to start that shitty linux 7,do I need open the case and press the power button?
Check the hub inside. Or better yet install the one that works
minis are really 8 singles in a box hooked up to a usb hub.
Dont worry about those FTDI Drivers. Use these drivers and use CGMiner 3.3.4
https://code.google.com/p/libusb-winusb-wip/downloads/detail?name=zadig.exe&can=2&q=
Make sure you have your minirig plugged in usb and power.. run the zadig.exe and choose your mini rig in the drop down and install the new driver.
Run CGMiner, and it should recognize your rig.
https://code.google.com/p/libusb-winusb-wip/downloads/detail?name=zadig.exe&can=2&q=
Make sure you have your minirig plugged in usb and power.. run the zadig.exe and choose your mini rig in the drop down and install the new driver.
Run CGMiner, and it should recognize your rig.
Anybody has idea why there's just 7 COM show up.where 's another one
Buy a cheap laptop, install Ubuntu and cgminer. Plug it in.
Done.
Done.
Or a raspberry pi...
Cheaper and lower power.
Buy a cheap laptop, install Ubuntu and cgminer. Plug it in.
Done.
Done.
All BFL units come with instructions................oh wait.............switch it over to 220 volt 
I'm sure someone has a thread on how to set it up,look around.
Good luck!!!!!!!
I'm sure someone has a thread on how to set it up,look around.
Good luck!!!!!!!
I restarted the system,and now com3,4,5,6,7,8,9working, there's 1 missing
I have installed ftdi driver,but my laptop just detected com3,4,5,6,7,,,,,,,there's com0,1,2 missing,
what should I do,thanks in advance!
ps:how to start that shitty linux 7,do I need open the case and press the power button?
what should I do,thanks in advance!
ps:how to start that shitty linux 7,do I need open the case and press the power button?
Jump to: