Author

Topic: Minimum spec computer for mining? (Read 597 times)

jr. member
Activity: 47
Merit: 1
August 06, 2017, 06:43:37 AM
#7
I run all my 5 GPU miners on 2G of RAM. The miners themselves run fine, although there isn't enough memory to compile some of the mining software, so I do that on a different box. I've run claymore, ethminer, ewbf zcash miner, and ccminer. All of them work fine.

It seems that many of these limitations are windows only. Everything works fine for me with 2G on a headless linux setup.

With regards to 16GB usb stick. Yes it's slow. Yes it's annoying when you are setting up. But it doesn't slow down mining at all. I've had logs overrun and the box has been mining with 0 free space for days before I noticed. Again, your mileage might vary if you use Windows.
sr. member
Activity: 336
Merit: 253
Gone phishing...
August 06, 2017, 04:42:30 AM
#6
Cheapest CPU+Mobo combo you can find with desired number of PCIe slots (if it's still in production it will work fine, assuming you are mining on GPUs).
2 GB RAM.
16GB USB Stick for linux distro of choice (hard drives cost more and use more power).
Power switch
Powered USB PCIe risers

If you are mining a CPU coin you will probably want a better CPU.

2gb of ram is not enough. If you are mining with 6+ gpus you might need at least 8gb as I have read that some ppl have problem with 4gb

Additionally, for some miners, additional storage may be necessary for page file/swap. For example, Claymore suggests having a minimum of at least 16GB of virtual memory for multi-GPU systems using his Zcash miner.
I would avoid using a cheap flash drive as a boot disk for long-term 24/7 use when you know a SWAP partition will be needed. Generic USB 2.0 drives can often wear down quickly. Quality flash drives would probably be okay.

I've just been putting some of my old 80GB SATA drives to use. Regardless, ensuring that you make a full image after setting up a working configuration can save you a lot of trouble, should something happen.

Extra tip on powered risers: SATA powered PCIe risers are generally not recommended, since SATA connectors are not designed to handle the current. Risers powered by 6 pin PCIe power connectors or 4 pin molex connectors are generally safer options.
legendary
Activity: 1878
Merit: 1038
Telegram: https://t.me/eckmar
August 06, 2017, 04:18:14 AM
#5
Cheapest CPU+Mobo combo you can find with desired number of PCIe slots (if it's still in production it will work fine, assuming you are mining on GPUs).
2 GB RAM.
16GB USB Stick for linux distro of choice (hard drives cost more and use more power).
Power switch
Powered USB PCIe risers

If you are mining a CPU coin you will probably want a better CPU.

2gb of ram is not enough. If you are mining with 6+ gpus you might need at least 8gb as I have read that some ppl have problem with 4gb
jr. member
Activity: 47
Merit: 1
August 06, 2017, 04:15:55 AM
#4
Cheapest CPU+Mobo combo you can find with desired number of PCIe slots (if it's still in production it will work fine, assuming you are mining on GPUs).
2 GB RAM.
16GB USB Stick for linux distro of choice (hard drives cost more and use more power).
Power switch
Powered USB PCIe risers

If you are mining a CPU coin you will probably want a better CPU.
legendary
Activity: 3808
Merit: 1723
August 06, 2017, 03:51:21 AM
#3
Pretty much all you need are PCIe slots. And a PSU with proper cables. Don't need no i7's for GPU mining.
-ck
legendary
Activity: 4088
Merit: 1631
Ruu \o/
August 06, 2017, 03:28:36 AM
#2
I guess you mean altcoin mining since computers have nothing to do with modern mining. Moving your thread to where it belongs in anticipation.
sr. member
Activity: 240
Merit: 250
August 06, 2017, 02:54:46 AM
#1
Minimum spec computer for mining? ram,vga and others
Jump to: