Topic: Mining load not working properly (Read 142 times)
Based on hashrate numbers you have provided : 460 sols, it seem that your cards are fully loaded, and the data about load you see are incorrect. so if you really need to know the realtime data for your rig, download and install msi afterburner, it will show realtime clocks, temps, and load levels of your card. you can overclock and downclock cards there
If you have mining with a CPU with Hyper mining process, then you might also want to experiment with special Devices selected Extra Launch Settings field. If you enter enable_true in this field, and set less Threads to, then will use per core affinity and run mining only on physical cores, leaving is not working threads unused. In some cases this yields in a bit higher performance. You'll notice that only percentage of overall CPU utilization will be show by task manager or similar utilities, however due to the nature of mining and the nature of how Hyper-Threading works,percentage of CPU compute power will actually be used.
WE PROVIDE A COMPLETE TECHNICAL SUPPORT IN MINING PLEASE WHATS APP ME ON THIS NUMBER WITH YOUR MINING ISSUE
+91-87443011122
+91-87443011122
yup it seems its a graphical glitch in awesome miner after all
dowloaded cpuid and it shows 98~100% load
and zotac does a realy good job with the cards not generating heat nor noise
Thanks
dowloaded cpuid and it shows 98~100% load
and zotac does a realy good job with the cards not generating heat nor noise
Thanks
its just some numbers mistake
do not worry
your gpus are running at 100%
do not worry
your gpus are running at 100%
Hello
A new miner here
I have just set up my mining rig (brand new rig)
Iam running a rig with 6 X zotac 1070 amp extremes
i started using awesomeminer
so after setting up everything and clicked start
i noticed my GPUs arent going on full load
all 6 GPUs are running at 5~10% load only with intensity 25 below it
i googled this issue but i cant find an answer to my problem
my rig does around 450~460 sols per card for a total of 2700 sols using equihash
generates around 14~17$ a day and 450~500 a month
the readings look correct based on whattomine BUT why are the GPUs not running at 80~100%?
before i started mining i always read about how noisy and hot the room would get...
but my rig is very quiet and heat generated is nearly none.. yet i still generate the same amount based on whattomine
i also tried mining using nice hash but the results are the same
anybody could please point out the problem i got with the load?
or everything seems fine?
A new miner here
I have just set up my mining rig (brand new rig)
Iam running a rig with 6 X zotac 1070 amp extremes
i started using awesomeminer
so after setting up everything and clicked start
i noticed my GPUs arent going on full load
all 6 GPUs are running at 5~10% load only with intensity 25 below it
i googled this issue but i cant find an answer to my problem
my rig does around 450~460 sols per card for a total of 2700 sols using equihash
generates around 14~17$ a day and 450~500 a month
the readings look correct based on whattomine BUT why are the GPUs not running at 80~100%?
before i started mining i always read about how noisy and hot the room would get...
but my rig is very quiet and heat generated is nearly none.. yet i still generate the same amount based on whattomine
i also tried mining using nice hash but the results are the same
anybody could please point out the problem i got with the load?
or everything seems fine?
Jump to: