Topic: Mining Motherboard - Tostarcn K35 v1.2 (Read 302 times)
Any luck with these boards... can get it to recognise all gpu cards...
Till now 6 GPU (gtx 1050 ti 4gb) max, we tried with ddr3 and ddr4, same behaviour, maybe the problem is the PSU: just 650w.
We tried with 2 psu, same result, the bios screen boot and freeze.
if anyone has the same problem and can fix it, pls answer here.
We tried with 2 psu, same result, the bios screen boot and freeze.
if anyone has the same problem and can fix it, pls answer here.
Hi,
it should work,did not try it myself,but it should work.what kind of memory did you try? i read that the intel 3855u also supports ddr4 2133 mhz.
it should work,did not try it myself,but it should work.what kind of memory did you try? i read that the intel 3855u also supports ddr4 2133 mhz.
Hi,
we just bought same MB (K35 v1.2) .
Did Anyone try with nvidia gtx 1050 ti?
we just bought same MB (K35 v1.2) .
Did Anyone try with nvidia gtx 1050 ti?
Hi i have the same board.Will pick it up tomorrow from the customs.I will try out to see what fits and not.Just one question, what kind of ram are you using only ddrl 1866 2133 mhz or anything else?
Hi People!
Just got a few of these K35 mining motherboards, I have an onda d1800 which runs perfectly however the k35 Im having some issues with and just thought I'd bring it up and probe for others in a similar boat.
Ok random chinese motherboards I get it... but they are so damn cool and simple!
https://imgur.com/66oH49U
I really do love this k35 board Im running a rig full of rx580 8gbs and my friend has a full stack of 1060's no worries!
We also use HP dps1200 supplies with breakouts and this motherboard only needs a single 6p to chooch so no silly pico adapter!
https://i.imgur.com/Oq9rLwv.jpg
But the moment 1070s and 1080s get involved it all goes to hell, and only one card will ever be recognized.
We both run hiveos and like nvoc it hates the internal gfx, so first step with these k35 boards is to
-turn off igfx, make the primary gfx PEG, and set the pcie mode to PEG eval
Also I set the video to UEFI and not Legacy.
https://i.imgur.com/IZU30HR.jpg
There seem to be lots of settings for the pcie channels but stumped as to what to try, have set topology to 1x and pcie to gen1 and gen2 to no avail!
Anybody have any ideas?
https://i.imgur.com/efYgfDG.jpg
https://i.imgur.com/HkFbOvF.jpg
hope this helps somebody
Just got a few of these K35 mining motherboards, I have an onda d1800 which runs perfectly however the k35 Im having some issues with and just thought I'd bring it up and probe for others in a similar boat.
Ok random chinese motherboards I get it... but they are so damn cool and simple!
https://imgur.com/66oH49U
I really do love this k35 board Im running a rig full of rx580 8gbs and my friend has a full stack of 1060's no worries!
We also use HP dps1200 supplies with breakouts and this motherboard only needs a single 6p to chooch so no silly pico adapter!
https://i.imgur.com/Oq9rLwv.jpg
But the moment 1070s and 1080s get involved it all goes to hell, and only one card will ever be recognized.
We both run hiveos and like nvoc it hates the internal gfx, so first step with these k35 boards is to
-turn off igfx, make the primary gfx PEG, and set the pcie mode to PEG eval
Also I set the video to UEFI and not Legacy.
https://i.imgur.com/IZU30HR.jpg
There seem to be lots of settings for the pcie channels but stumped as to what to try, have set topology to 1x and pcie to gen1 and gen2 to no avail!
Anybody have any ideas?
https://i.imgur.com/efYgfDG.jpg
https://i.imgur.com/HkFbOvF.jpg
hope this helps somebody
Jump to: