Topic: [Mining OS] RaveOS - Optimize your cryptomining business now! (Read 1795 times)

02.12.2022
You can download the system image here (read the installation recommendations on the website) or update the system on rig via the upgrade 8860-2180 command or upgrade -b 8860-2180 (for 1.0.25 or older versions)

For a correct update, we recommend using the following sequence of actions:

1. Stop mining (Actions-Pause)

2. Restart the worker (Actions-Reboot)

3. Update with the upgrade 8860-2180 or upgrade -b 8860-2180 command (after a successful update, the rig will automatically restart)

4. Start mining

https://raveos.com/changelog.html#v8860-2180

Can you prove it? Excellent system for mining, and enough features for free use.


DEAR USERS!
Changes in RaveOS billing system and tariff plans come into effect from October 17.
Price for PRO tariff is REDUCED by 25% and will be $1.5 per month per worker.
For customers with one active worker (rig or ASIC), using RaveOS is still absolutely free.
Starting from October 17th the 2miners pool-based workers will be charged according to the new price conditions.
https://raveos.com/pricing.html

RaveOS SCAMERS !

Thread almost isn't live.
Move Your questions to Telegram section and You'll get answers...

Hello everybody, is this thread active?

I'm having some troubles I believe, I've started using RaveOS this week and it's awesome. It recognized my cards and I started mining using lolminer 1.20...

The thing is that I have 12 almost obsolete cards for mining, AMD RX570 4GB... They're on two separated rigs, they work just fine, but the hashrate is very, very low... They get to work at 13Mh/s each, tops, and I'm not sure if that's all they can handle now because of the DAG size or is it something with the miner and I should try another one... What do you think?

Thanks in advance.

The RX 550 Baffin cards are running on Linux based RAVE OS with low hashrate comparing with the RX 550 Lexa cards.
Baffin only gets 300 H/s, but Lexa gets 520 H/s at CN haven using TRM newest version.
All cards are elpida memory and using memory straps from SRB. 1150/870mV core and 1900/870mV memory.
When I run baffin cards rigs on win 10, it gets 480 H/s each.

Can anyone help me to solve this problem ?

Thank you

Sapphire makes trouble.
MSI makes trouble also.

I tried. And even reboot rigs. No any result with Sapphire Nitro+. And I tested it command with Gigabyte 5600 - leds turned off same as NVIDIA 10xx series. Problem with Sapphire and i dont see any decision.

Try to not remember. Try command as "oc" option...
As i see, on Russian forum example, they put it in AMD settings for Gigabyte RX 5700...

Thx dude. But it works only for NVIDIA GPUs. And if i remember correctly - 10xx. But i need turn led off for AMD. Sapphire 5xx had a button to change or turn off leds and 5xxx havent it.

looks nice
But i have try'ed it and could not set it up
This pakkage needs a ingeneer degree if you wanna use it.
Make it simple to use and maybe i will try it again.

I could not even choose the ethereum pool.
The instruction video is very incomplete
The person who made that video has extreme fast fingers and clicks so fast that you have to stop the video constantly.
In that video he chooses a mining pool but in the actual pakkage there are no mining pools.
How to setup a mining pool adress is not in the video.

And the list of incomplete go's on and on and on

my rating for the setup would be on a scale of 10 a minor 3 sorry

In Tuning/Set option try to put command "oc -led=0" or read this posts from link:
http://miningfamily.org/viewtopic.php?f=14&t=51

Is it possible to make some switch to turn off GPU leds? Mostly interesting in Sapphire Nitro+ RX 5xxx series. Other GPUs are interesting too but Sapphire leds are really bright. Or may be i cant just find it?

Hi.
I am starting to use RaveOS from latest build and with Navi (5700 XT) cards and i think RaveOS have a great potentials.
Have some pronlems with tuning!!! and i beg You to solve this:

- Workers/Tuning and "Memory voltage, mV" field do not working when applying!!! Have filled with 1255mV but Atitool told me 1300mV as default value only working as set through Exec/Set option

- in Workers/Tuning put a field for Memory Controler Voltage in mV!!! (at this state, i must enter it through Exec/Set as OC command -mvddc !!!)


TNX

Hey, thank you! Sure, can do this!

Great OS...
I think it would be useful to have the new settings OC in webpage too. Like a fast guide...

The autofan works perfect... the best to have mininal fan consume.

Could you also add for ETC crypit.net?  It is a pool with high Hash... I added manually and perfectly

👨‍🚀❗️We are glad to present you the new RaveOS 1.0.23 (8317-1685) ❗️

Image download link:
https://image.raveos.com/linux/latest

 (https://image.raveos.com/linux/latest)or use upgrade or upgrade -b latest or upgrade -b v.1.0.23 command to update from Console



RaveOS 1.0.23  version:
### What’s new:
* Linux kernel: 5.6.2 (amdgpu 5.6.2, nvidia 440.82, OpenCL AMD 20.10, CUDA 10.2)
* Removed 4Gb memory limit for Polaris 8GB (October-December 2020 issue)🧨
* Added mixed rigs support (Nvidia + Vega/Navi + Polaris) ❗️You need to be sure miner software support mixed rigs too❗️
* Fixed memory allocation issue on boot (now no need to set 32Mb limit in BIOS for integrated graphic card)
* Fixed fan display and fan control for some Navi GPUs
* Optimized overclock for Vega10, Navi10, Navi14
* Autofan operates depending on the maximum core / memory temperature (only for cards with a memory temperature sensor) Example: Vega10/Vega20/Navi10/Navi14
* Fixed applying custom Power Limit settings for NVIDIA GPUs
* Atitool utility added
* Minor bugs fixes
* New overclock functionality❗️ (now we can apply overclock using Execute):

  Example:
     "oc -cclk=1070 -mclk=2050 -cvddc=780 -mvddc=800 -tt=65 -fan=80"
  
  ❗️The command should always start with "oc "❗️
  
  Argument list:
    -cclk=     - Core frequency, Mhz (Frequency offset for Nvidia GPUs)
    -mclk=     - Memory frequency, Mhz (Frequency offset for Nvidia GPUs)
    -cvddc=    - Core voltage, mV (AMD GPUs only)
    -mvddc=    - Memory controller voltage, mV (AMD GPUs only)
    -tt=       - Target temperature (if autofan is on )
    -ttm=      - Memory target temperature for Vega/Navi cards (if auto fan is off). If installed more than 0, -tt is ignored!
    -fan=      - Fan speed (if auto fan is off)
    -pl=       - Consumption limit in watts (Nvidia GPUs only)

Available for Navi only:
    -mvdd=        - Memory voltage, mV (1350 mV by default)
    -socvddmax=   - Maximum voltage SOC, mV
    -gfxvddmax=   - Maximum voltage GFX, mV
    -socclkmax=   - Maximum frequency SOC, Mhz
    -gfxclkmax=   - Maximum frequency GFX, Mhz  

❗️❗️❗️  For ETH/ETC mining on RX Vega/Navi series you will need 6GB+ RAM (4GB is enough for TeamReadMiner)❗️❗️❗️❗️

Check out new Mass Migration Tool Beta from RaveOS. Bulk installation on rigs and ASIC's in few clicks!

https://youtu.be/4YtFtdfkcAs

more information on our website!

https://raveos.com/

Bceм пpивeт!

A кaк нacтpoить мaйнинг ETH + Zilliqa (ZIL) нa пyл ezil.me?

Зapaнee блaгoдapю зa oтвeты!

Xм... в 1.0.17, xoть и чepeз бyбeн, нo paбoтaют.

к coжaлeнию, c paбoтoй r9  ecть пpoблeмы, ceйчac paзpaбoтчики paбoтaют нaд peшeниeм пpoблeмы. Извинитe зa нeyдoбcтвa.

AMD R9 390
Bce впиcaнo, пo инcтpyкции.
http://radikal.ru/fp/zfkr8vz7bbes9
https://d.radikal.ru/d00/1907/d0/eb96f67d3785.jpg

https://a.radikal.ru/a29/1907/f2/a79029449215.jpg

кaкиe y Bac кapты? Bы пpoпиcaли в config фaйлe pиг id и пapoль?
https://youtu.be/QYmU41-v6Zw

нe paбoтaeт, пocлe cтapтa пocтoянный peбyт.

❗️Dear friends❗️
😱 We present to your attention RaveOS. https://raveos.com
 A new version of the image 1.0.18 is ready.
 There was a small rebranding.
 Link to the new image:
 https://image.ravinos.com/images/raveos-v1.0.18.img.zip
Changes in image 1.0.18:
- Added autofan
- Added autoreboot after errors.
- Added ability to configure config in a text file
- Optimized system loading
- Bugs with Wi-Fi configuration fixed
- Changed logging system (flash drives live longer, logs are packed in zip archives)
- Added the ability to change the memory voltage for AMD
- Added the ability to run  commands for the GPU (amdmemtweak)
- Improved error trapping system (GPU and operating system)
- Improved system stability
- Fixed a bug when the system did not rise in the absence of an Internet connection
- Linux kernel: 5.0.17
- AMD driver: amdgpu from the kernel
- Nvidia Driver: 430.26
     The support of the RSW utility is temporarily removed, but we added the ability to change the config file to connect without a monitor.
    We also warn that the new version does not yet support updating over the air (the image must be overwritten).
    The RaveOS team apologizes for the long wait!

We have 1$\rig, Hive have 3$. We can't give more free rigs.

Switched most of my rigs to Ravin OS from Hive OS. Hive are too expensive these days when profitability not so good.

Works good so far. You even have mobile app right from the launch. HIve still doesn't. Great work guys.

I think your free package must have more free device count than HiveOS Free package. Otherwise difficult to fight with HiveOS.

Interesting.

❗️❗️❗️Dear Ladies and Gentlemen❗️❗️❗️

We are glad to inform you that our application is now available on Play Store and App Store!

iOS: https://itunes.apple.com/ua/app/ravinos/id1455397565
Android: https://play.google.com/store/apps/details?id=com.ravinos

Reserved

Reserved

   https://raveos.com –  our website

     RaveOS is an specialized Linux based operating system, which allows you to manage, monitor and configure your cryptocurrency mining devices with ease. Monitor all your rigs hashrate, temperature, errors in one place. We support advanced overclocking for most used GPUs.  You can add multiple coins and pools to your wallets and apply it in few clicks. RaveOS is created both for home miners and huge farms.
    
     Our features:

• Mobile App for IOS and Android to configure and watch your rigs from smartphone or tablet
• Windows App (coming soon)
• Web panel with detailed rig statistics
• Detailed reports (electricity consumption)
• Power consumption fine-tuning
• Custom mining, add some coins, pools and miners by yourself
• Referral system
• Remote access to your device from anywhere
• Trusted Accounts for admins and clients
• Easy installation on any device with RaveOS installation utility (Flash, SSD or HDD)
• Group management (reboot, change wallets, pools and miners for group of rigs)
• Hashrate and temperature watchdogs
• Built-in GPU-s error detection

     GPUs supported:

• AMD Radeon RX500, 400 Series, VEGA Series
• Nvidia GeForce GTX 10 Series, RTX 20 Series, P106-100, P104-100

    ASICs supported:

• Antminer S9, D3, L3+, A3

    Miners installed: ASIC bmminer, ASIC cgminer, Claymore Dual Ethereum Miner, Claymore ZCash AMD GPU Miner, Claymore CryptoNote AMD GPU Miner, Ethminer, EWBF's CUDA Zcash miner, Ccminer with forks (enemy, tpruvot, alexis, nanashi, rvn, xevan, djm34, sp-mod etc.) , Sgminer with forks (gm-nicehash, gatelessgate, phi, djm34, avermore etc.), lolMiner, XMR Stak ( AMD, Nvidia, CPU), XMRig (AMD, NVIDIA, CPU), T-rex miner, Nbminer, Grinminer, Phoenixminer and others.

     https://raveos.com – website
https://www.youtube.com/channel/UCEeQ-9naySWvVMszijtV6VA - Youtube chanel
https://twitter.com/OsRavin - Twitter
https://t.me/joinchat/Ikar_UeiZnph_CLwY30w3A - English Telegram chat
https://t.me/joinchat/Ikar_VJeW-b30hgOj-ZNkA - Russian Telegram chat
https://t.me/ravinos_news - News and updates chanel


Our application is now available on Play Store and App Store!

iOS: https://itunes.apple.com/ua/app/ravinos/id1455397565
Android: https://play.google.com/store/apps/details?id=com.ravinos