Mining rig crashing? | Bitcointalksearch.org

nx01

newbie

Activity: 6

Merit: 0

Went through systematically and eliminated each component, power supply is fine, looks like I've figured out the issue, a dodgy MSI card! It was fine when I got it and tested it, worked fine for about 5 days, now is in the process of dying with artifacts during gaming. I've sent it back for warranty (bought it used online, with warranty, how good is that). Also went and bought a new board, asus H270 plus (with Gen1/4G encoding on), what a beast! Asrock gaming boards for this don't seem to be the best..

Anywho, I've managed to get it mining-stable with these 4 cards (sapphire 480, ASUS ROG 480, 2x ASUS ROG 580's), ~111MH/s, however the 580's are such a power hog! I'm getting 135W, running at -100mV, Mem clocks at 2200, core at 1050, running at a toasty 46C Tongue

.. Any tips to reduce it further? At least it's down from 170W!

nx01

newbie

Activity: 6

Merit: 0

Quote from: Vann on July 02, 2017, 05:24:11 AM

How many cards are you using per PCI-E connector? You could be overloading the PCI-E rails. Some PSU's can only handle 15-20 A on each PCI-E rail.

I did have one of the 580's and the ASUS 480 on a single cord, however I lowered the power usage. What I'm trying now is one putting in one at a time, on one cord at a time, i've also lowered the power usage by dropping the core voltage by -100mv and decreasing the clocks to 1100, and i've got the 580 + asus 480 on a single cord running just fine (afterburner reports both are drawing 100+67w total). I've got the 580 running at 100w and the 480s at 70 and 80w (abouts). I'm hoping that will solve it, however I need to go buy a new motherboard to try all 5 on one board - so far it looks like I've got 3 working at once, a 580, with the sapphire and asus 480. But I'm not sure that is the issue, simpleminer is giving me errors such as "amdgpu - failed to send message" and all that, which then starts mining and crashes after a few minutes! Ugh..

Vann

hero member

Activity: 1036

Merit: 606

Quote from: nx01 on July 02, 2017, 05:19:09 AM

Yeah I did patch the drivers, and tried both modded and unmodded bios, but these cards dont seem to play together nicely. Either my power supply is faulty - which it cant be, it's brand new and afterburner shows a constant stream of power working beautifully for the cards, or the used 480's are screwed, which is highly odd, they work fine by themselves. So maybe it IS the power supply, or the motherboard - or the risers! I tried another board, same issue, but I had the 580's on risers before i got the 480's, and they worked great - which is the reason I bought 3x used 480's to add in!

How many cards are you using per PCI-E connector? You could be overloading the PCI-E rails. Some PSU's can only handle 15-20 A on each PCI-E rail.

nx01

newbie

Activity: 6

Merit: 0

Yeah I did patch the drivers, and tried both modded and unmodded bios, but these cards dont seem to play together nicely. Either my power supply is faulty - which it cant be, it's brand new and afterburner shows a constant stream of power working beautifully for the cards, or the used 480's are screwed, which is highly odd, they work fine by themselves. So maybe it IS the power supply, or the motherboard - or the risers! I tried another board, same issue, but I had the 580's on risers before i got the 480's, and they worked great - which is the reason I bought 3x used 480's to add in!

Vann

hero member

Activity: 1036

Merit: 606

Quote from: CjMapope on July 01, 2017, 07:37:10 AM

you need to find the right driver that works across ALL the cards.

I had this issue, much headache. i BELIEVE 16.2 (3?) was the one. march 3rd driver? shit i sold all my AMD i cant remember Sad

Cause the new 500 series cards wont work on OLD drivers period, but the NEWEST drivers will cause issues when used on both 400 AND 500 mixed card rigs...

This ones a bitch haha, but test ALL drivers, with DDU in between, if you find the right one it should work

Course i HEAR b250 chipset sux for mining too on gaming boards.... :/ hmmmm

I've had zero compatibility issues with any of the 17.4.X drivers in a mixed RX 4XX/5XX rig with memory strap Bios modded cards and a Nvidia 1080 card on the same rig. The AMD drivers less than 17.4.X are not compatible with the RX 5XX cards. I also update to the newest driver when it comes out. If you have Bios modded cards, all you need is to patch the signature check after you install the drivers.

https://www.youtube.com/watch?v=IAiScXPisAY

CjMapope

legendary

Activity: 1820

Merit: 1092

~Full-Time Minter since 2016~

you need to find the right driver that works across ALL the cards.

I had this issue, much headache. i BELIEVE 16.2 (3?) was the one. march 3rd driver? shit i sold all my AMD i cant remember Sad

Cause the new 500 series cards wont work on OLD drivers period, but the NEWEST drivers will cause issues when used on both 400 AND 500 mixed card rigs...

This ones a bitch haha, but test ALL drivers, with DDU in between, if you find the right one it should work

Course i HEAR b250 chipset sux for mining too on gaming boards.... :/ hmmmm

Vann

hero member

Activity: 1036

Merit: 606

Quote from: nx01 on July 01, 2017, 05:26:23 AM

Quote from: Vann on July 01, 2017, 05:16:09 AM

The default clocks are too high for mining. When mixing cards, you need to find the best core and memory clocks for each card and apply the settings individually in Afterburner. I have a RX 580 8GB, two RX 480 8GB and two RX 570 4GB together on the same rig. I use 1130 - 1150 MHz for the core clock and 1975 - 2025 MHz for the memory clock depending on the card, together with the Uber Mix v3.1 timing strap mod. I also use the latest 17.6.2 driver.

Yup done that, tested each one and underclocked each, then applied when they were all together, yet it didn't work.

Then it sounds like it could be a PSU issue from overloading the rails. Try running only one card per PCI-E connector and see if it helps.

nx01

newbie

Activity: 6

Merit: 0

Quote from: Vann on July 01, 2017, 05:16:09 AM

The default clocks are too high for mining. When mixing cards, you need to find the best core and memory clocks for each card and apply the settings individually in Afterburner. I have a RX 580 8GB, two RX 480 8GB and two RX 570 4GB together on the same rig. I use 1130 - 1150 MHz for the core clock and 1975 - 2025 MHz for the memory clock depending on the card, together with the Uber Mix v3.1 timing strap mod. I also use the latest 17.6.2 driver.

Yup done that, tested each one and underclocked each, then applied when they were all together, yet it didn't work.

Vann

hero member

Activity: 1036

Merit: 606

The default clocks are too high for mining. When mixing cards, you need to find the best core and memory clocks for each card and apply the settings individually in Afterburner. I have a RX 580 8GB, two RX 480 8GB and two RX 570 4GB together on the same rig. I use 1130 - 1150 MHz for the core clock and 1975 - 2025 MHz for the memory clock depending on the card, together with the Uber Mix v3.1 timing strap mod. I also use the latest 17.6.2 driver.

nx01

newbie

Activity: 6

Merit: 0

Hi all, long time lurker, first time poster with a new rig!

Specs:

o Thermaltake 1200W gold
o ASRock B250-Gaming-K4
  o 4GB DDR4 RAM
  o Intel i3
o 5x GPU:
  o MSI RX 580 stock
  o ASUS STRIX RX 480 stock
  o Sapphire Nitro + RX 480 stock
  o 2x ASUS STRIX RX 580 stock

I tend to use nicehash and simplemining.net intermittently - however i cannot seem to get the 480's to cooperate together and/or with the 580's at all! I've tried uninstalling with DDU multiple times, reinstalling drivers both manually and with the AMD installer, but nothing seems to be working.

I've tested each card individually, and they all mine perfectly fine by themselves. Sometimes the 480's work together fine, same with the 580's, and sometimes they don't!

Sounds like a driver issue to me.. I've tried setting the PCIE to Gen1, tried Auto as well. Also tried bios modding on the cards, but reverted to stock, at least until i get it working!
Anyone got any tips on mixing different gens of cards on a windows install?

Topic: Mining rig crashing? (Read 999 times)