Mining Rig Crashing? Also need help with Hynix hashrates on RX570 card.

seufee

newbie

Activity: 25

Merit: 0

Quote from: baga105 on January 22, 2018, 02:20:00 PM

You dont have to take the cards out of the system to check the "bad" card..
Specify the cards in your bat file. -di 0,1,2,3,4...... Go to steps... -di 0, check if it working.. Instert -di 1.. check if its working... And so on.. It will save you some time with rebootig and taking your cards out Wink

Sorry, how exactly would I do that in the bat file? Just -di GPU0 to disconnect that card?

baga105

sr. member

Activity: 362

Merit: 250

You dont have to take the cards out of the system to check the "bad" card..
Specify the cards in your bat file. -di 0,1,2,3,4...... Go to steps... -di 0, check if it working.. Instert -di 1.. check if its working... And so on.. It will save you some time with rebootig and taking your cards out Wink

seufee

newbie

Activity: 25

Merit: 0

Quote

Isolate it by excluding other GPU's, like installing 1 GPU 1st fire up claymore if success, then 2,3,4 by then you could determine what might be the problem, most common will be the Riser and your PSU, ensure that your PSU could handle 4 GPU power.

I will try this when I get home. The PSU is 1200W Platinum rated so I think it should be good.

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: seufee on January 21, 2018, 11:56:59 PM

Hey everyone,
I need a bit of help with 2 things.
First of all, I have 4 RX570 GPUs. Apparently 1/4 is a Elpida type memory, which I found a config for and got a 29Mh/s speed with. The other 3 are Hynix and I can only get around 19.5 out of it.

mod the GPU bios according to mem types, there are sweet spots for Hynix cards

https://bitcointalksearch.org/topic/guidetutorialxmrethhow-to-mod-bios-rx470570480580-vega-mining-1954245

Quote

Now the main issue I am having now is that when I run my Claymore miner, it will go for about 10 minutes, and then my screen goes a weird blue color and I can't do anything, and my GPUs turn off. I can't hit the power button since nothing happens so I need to power off the PSU and then power everything back on. Any ideas?

Isolate it by excluding other GPU's, like installing 1 GPU 1st fire up claymore if success, then 2,3,4 by then you could determine what might be the problem, most common will be the Riser and your PSU, ensure that your PSU could handle 4 GPU power.

seufee

newbie

Activity: 25

Merit: 0

Hey everyone,
I need a bit of help with 2 things.
First of all, I have 4 RX570 GPUs. Apparently 1/4 is a Elpida type memory, which I found a config for and got a 29Mh/s speed with. The other 3 are Hynix and I can only get around 19.5 out of it.
Now the main issue I am having now is that when I run my Claymore miner, it will go for about 10 minutes, and then my screen goes a weird blue color and I can't do anything, and my GPUs turn off. I can't hit the power button since nothing happens so I need to power off the PSU and then power everything back on. Any ideas?

Topic: Mining Rig Crashing? Also need help with Hynix hashrates on RX570 card. (Read 149 times)