keep on mining 
Topic: Mining Rig Help (Read 520 times)
Cool keep on mining
keep on mining
Great, thanks everyone.
Today im going to change the BIOS settings, I'll let you know if that works...
About the power, I already fixed, As m1n1ngP4d4w4n comment before, I didn't have enough power for my machine, my technician already fixed the electrical line and now it's working.
Today im going to change the BIOS settings, I'll let you know if that works...
About the power, I already fixed, As m1n1ngP4d4w4n comment before, I didn't have enough power for my machine, my technician already fixed the electrical line and now it's working.
Thanks for your replay lummujaj!!
I have three setting for PCI-E, should I set the three setting with that value?
I have three setting for PCI-E, should I set the three setting with that value?
I dont have that mb , on my assrock i only have one pcie settings and ive set to gen2 , othervise i cannot go more than 4gpu
Pulling too much from the wall, if electricity go out, you must be very limited.
Guys also I'm having other issue, as you saw in my first message I have an EVGA 1300 but when I start my rig with 4 GPUs the power of the whole place go off, I've already tried twice and both times I loose the power of the place.
Do you know something about this?
Regards
Do you know something about this?
Regards
Thanks for your replay lummujaj!!
I have three setting for PCI-E, should I set the three setting with that value?
I have three setting for PCI-E, should I set the three setting with that value?
look into bios for PCIE settings , and set it to GEN 2
Hi, I have my rig like this:
- Asrock Z97 Extreme6
- 5 Sapphire Nitro RX 470
- Intel Core i3 1150
- 4 GB Ram
- 60 SSD
- EVGA 1300
I have four GPUs connected but when I connect the other one the motherboard throws an A2 error, but only with that port, but the port have no issue if I connect the gpu there and remove the other GPUs.
Do you know how to fix this, for me seems to be a problem on BIOS or configuration but Im not sure.
Thanks
- Asrock Z97 Extreme6
- 5 Sapphire Nitro RX 470
- Intel Core i3 1150
- 4 GB Ram
- 60 SSD
- EVGA 1300
I have four GPUs connected but when I connect the other one the motherboard throws an A2 error, but only with that port, but the port have no issue if I connect the gpu there and remove the other GPUs.
Do you know how to fix this, for me seems to be a problem on BIOS or configuration but Im not sure.
Thanks
Jump to: