Mining rig stops after 5 mins | Bitcointalksearch.org

umine

full member

Activity: 405

Merit: 136

Quote from: sniper420 on December 20, 2017, 04:27:50 AM

I got new etherum gpu mining rig. It stops functioning after 5 mins of running claymore. The video goes blank then the whole gpus stop. I am running 6 gpu 580rx Amd and Asus 270p motherboard. Any idea for the problem?

Many asked about disclose your rig configuration: hardware/software. Your symptoms can said about various problems: from bad plugged power connector to software incompatibility or GPU BIOS error

Deathwing

legendary

Activity: 1638

Merit: 1328

Stultorum infinitus est numerus

You still did not give information regarding your Power Supply, there is a huge chance it might be that one causing it. But if you are having the exact same issue with one-card only with a roughly 400-500W avg PSU that means your issue is the either riser or Motherboard.

sniper420

newbie

Activity: 10

Merit: 0

Quote from: leonix007 on December 20, 2017, 11:14:05 AM

Quote from: sniper420 on December 20, 2017, 11:05:02 AM

Quote from: coinzoid on December 20, 2017, 08:23:56 AM

Give us more details. What is number of the driver version you are using currently? It could be that you are not using the optimal drivers for your gpus.

I am using same exact drivers for.I am running crimson relive edition beta compute driver for Windows 10 64 bit for rx580 hynix memory. Using same exact version on another rig without any probe. Same hynix rx580

Have you tried mining on single GPU only, a lot of reasons to be the culprit and needs to be addressed one by one.

Try to install single GPU on PCI-e 16x slot, in this way you would determine the PSU and Risers excluding them on the list when the problem is the same.

Then you may now have an idea on the remaining hardwares and softwares to be checked.

Same scenario. I tried with one card on 3 different cards it runs first 5 mins then stops. Sucks forgot. To backup original rom file. Damn

leonix007

sr. member

Activity: 1008

Merit: 297

Grow with community

Quote from: sniper420 on December 20, 2017, 11:05:02 AM

Quote from: coinzoid on December 20, 2017, 08:23:56 AM

Give us more details. What is number of the driver version you are using currently? It could be that you are not using the optimal drivers for your gpus.

I am using same exact drivers for.I am running crimson relive edition beta compute driver for Windows 10 64 bit for rx580 hynix memory. Using same exact version on another rig without any probe. Same hynix rx580

Have you tried mining on single GPU only, a lot of reasons to be the culprit and needs to be addressed one by one.

Try to install single GPU on PCI-e 16x slot, in this way you would determine the PSU and Risers excluding them on the list when the problem is the same.

Then you may now have an idea on the remaining hardwares and softwares to be checked.

sniper420

newbie

Activity: 10

Merit: 0

Quote from: coinzoid on December 20, 2017, 08:23:56 AM

Give us more details. What is number of the driver version you are using currently? It could be that you are not using the optimal drivers for your gpus.

I am using same exact drivers for.I am running crimson relive edition beta compute driver for Windows 10 64 bit for rx580 hynix memory. Using same exact version on another rig without any probe. Same hynix rx580

RealSwissMiner

member

Activity: 336

Merit: 15

Sounds to me like a PSU issue. Can you provide more details on the rest of your gear?
Also indicating the temperatures after the mining started would be helpful.

Hariz

member

Activity: 115

Merit: 10

Check Power Supply Unit.. probably the unit is underpowered which is why its getting cut off.

kriskarthik

full member

Activity: 258

Merit: 100

Try to run without overclocking and see if it continues to run or is it still goes down. I had similar problems at the beginning using win10 and problem didn’t aprear after reducing the over clocking.

bouldou

full member

Activity: 403

Merit: 101

Hello,

What is your PSU ? It could be not powerful enough. What happend if you unplug one or two GPU, does it work then ?

Do you also check the GPU temperature ? You can set a maximum temperature in Claymore's option, I suggest you try it

Let us know

coinzoid

sr. member

Activity: 476

Merit: 250

Give us more details. What is number of the driver version you are using currently? It could be that you are not using the optimal drivers for your gpus.

sniper420

newbie

Activity: 10

Merit: 0

Quote from: teo220 on December 20, 2017, 08:03:31 AM

Did you set max temperature and target temperature.

some program like overdrive n tool can turn off your GPUs to protect to burn.

Yes I have overdrive n tool but target was 60. Max I do not remember. Will claymore. Logs say that?

teo220

member

Activity: 84

Merit: 11

Did you set max temperature and target temperature.

some program like overdrive n tool can turn off your GPUs to protect to burn.

sniper420

newbie

Activity: 10

Merit: 0

Quote from: sniper420 on December 20, 2017, 04:27:50 AM

I got new etherum gpu mining rig. It stops functioning after 5 mins of running claymore. The video goes blank then the whole gpus stop. I am running 6 gpu 580rx Amd and Asus 270p motherboard. Any idea for the problem?

Any idea anybody?

sniper420

newbie

Activity: 10

Merit: 0

I got new etherum gpu mining rig. It stops functioning after 5 mins of running claymore. The video goes blank then the whole gpus stop. I am running 6 gpu 580rx Amd and Asus 270p motherboard. Any idea for the problem?

Topic: Mining rig stops after 5 mins (Read 154 times)