https://www.facebook.com/NitroRigs/
Topic: Mining Rigs/ASICs Automated Resetter & Power Meter [NitroRigs] (Read 168 times)
December 05, 2018, 03:37:16 AM
WEBSITE: www.nitrorigs.com 
Our Product:
- In its core our product is basically a smart energy meter with cloud-access relay. There are a lot of those on the market - you have seen them. But NitroRigs Resetter comes with few special tricks up its sleeve that make it the first of its kind. It is uniquely tailored for use with mining rigs and ASICs.
- NitroRigs Resetter is the only mining rig resetter that connects directly to the power supplies. It doesn't press the power/reset button on the mother board. Instead it cuts off and restores the power input to the rig on demand. This is the most efficient and reliable way of rebooting a mining rig or ASIC when needed. The resetter does not need any other connection (USB, motherboard or otherwise) besides the power supply. This makes it very easy and straight-forward to use by anyone. You just need to provide Ethernet (LAN) connection, plug it to your rig/ASIC power supplies and you are good to go.
- Since all power supplied to the rig goes trough the NitroRigs resetter it also measures in real time the wattage, voltage, amperage and meters the daily/monthly consumption. This is far more precise than monitoring GPUs with software because the resetter reads what you actually use "at the wall".
- And finally and most importantly, all of this is done via our cloud based management software. You can connect to and control every single resetter that you have from our online platform through your account, wherever you are.
Who are we:
- We are a hardware and software development company with experience in the crypto world. We have been working on different crypto-related projects since 2015. We also have some mining equipment of our own and were looking for solutions for remote management and improving the performance of our hardware. But the available options on the market were just not sufficient for our needs. We have used single-board computers to control the power buttons of the motherboards, we have used smart energy meters, we have used complex solutions that plug in the USB and have some software to report if the machine is alive and so on. None of those were good enough for us.
- So we decided to produce a device that is easy to set up and manage, focused on the task and reliable. Something to give us the functionality that we needed in its simplest form. After over two years of development and testing we ended up with the NitroRigs Resetter. It is not only a bare-bone resetter but also has the much-needed features that make it the most useful and usable device in this area on the market today.
- We haven't just developed the resetter. We are also its main users. Since 2017 we have several hundred units working in our mining-rig collocations. That is how we know it works flawlessly before it arrives in your hands. Feedback from customers and involved third parties have proven the product is ready for the mass market.
- We are currently in pre-production for the first batch of retail units. So if you want to join the group of happy NitroRigs users, you can sign up for our beta testing program and become one of the first people to experience a worry-free mining once and for all.
There are no special requirements whatsoever for using the resetter (except you will need to provide internet access to it). All the needed information like FAQ, more detailed explanation of how it actually works, pictures of the device itself and also where and how to contact us, you can find on our website – www.nitrorigs.com
-----
Price and availability:
- The prices are yet to be officially announced but we are able to tell some estimated prices in advance exclusively for the bitcointalk users.
- The pricing of the device itself (hardware) will be around USD 55.00-60.00$ with free worldwide shipping.
- The pricing of the cloud-based features (software) will be around USD 1.00-1.50$ per device per month with the first two or three months for free.
- We expect the first batch of resetters to be ready for shipping somewhere around the end of February 2019.
We are open to all kind of questions and suggestions from your side, so feel free to comment and ask.
_______
Our Product:
- In its core our product is basically a smart energy meter with cloud-access relay. There are a lot of those on the market - you have seen them. But NitroRigs Resetter comes with few special tricks up its sleeve that make it the first of its kind. It is uniquely tailored for use with mining rigs and ASICs.
- NitroRigs Resetter is the only mining rig resetter that connects directly to the power supplies. It doesn't press the power/reset button on the mother board. Instead it cuts off and restores the power input to the rig on demand. This is the most efficient and reliable way of rebooting a mining rig or ASIC when needed. The resetter does not need any other connection (USB, motherboard or otherwise) besides the power supply. This makes it very easy and straight-forward to use by anyone. You just need to provide Ethernet (LAN) connection, plug it to your rig/ASIC power supplies and you are good to go.
- Since all power supplied to the rig goes trough the NitroRigs resetter it also measures in real time the wattage, voltage, amperage and meters the daily/monthly consumption. This is far more precise than monitoring GPUs with software because the resetter reads what you actually use "at the wall".
- And finally and most importantly, all of this is done via our cloud based management software. You can connect to and control every single resetter that you have from our online platform through your account, wherever you are.
Who are we:
- We are a hardware and software development company with experience in the crypto world. We have been working on different crypto-related projects since 2015. We also have some mining equipment of our own and were looking for solutions for remote management and improving the performance of our hardware. But the available options on the market were just not sufficient for our needs. We have used single-board computers to control the power buttons of the motherboards, we have used smart energy meters, we have used complex solutions that plug in the USB and have some software to report if the machine is alive and so on. None of those were good enough for us.
- So we decided to produce a device that is easy to set up and manage, focused on the task and reliable. Something to give us the functionality that we needed in its simplest form. After over two years of development and testing we ended up with the NitroRigs Resetter. It is not only a bare-bone resetter but also has the much-needed features that make it the most useful and usable device in this area on the market today.
- We haven't just developed the resetter. We are also its main users. Since 2017 we have several hundred units working in our mining-rig collocations. That is how we know it works flawlessly before it arrives in your hands. Feedback from customers and involved third parties have proven the product is ready for the mass market.
- We are currently in pre-production for the first batch of retail units. So if you want to join the group of happy NitroRigs users, you can sign up for our beta testing program and become one of the first people to experience a worry-free mining once and for all.
There are no special requirements whatsoever for using the resetter (except you will need to provide internet access to it). All the needed information like FAQ, more detailed explanation of how it actually works, pictures of the device itself and also where and how to contact us, you can find on our website – www.nitrorigs.com
-----
Price and availability:
- The prices are yet to be officially announced but we are able to tell some estimated prices in advance exclusively for the bitcointalk users.
- The pricing of the device itself (hardware) will be around USD 55.00-60.00$ with free worldwide shipping.
- The pricing of the cloud-based features (software) will be around USD 1.00-1.50$ per device per month with the first two or three months for free.
- We expect the first batch of resetters to be ready for shipping somewhere around the end of February 2019.
We are open to all kind of questions and suggestions from your side, so feel free to comment and ask.
_______
Jump to: