Topic: Missing board from Miner Status - AntMiner S9 (Read 165 times)
Board failure. If you bought directly from Bitmain and are within your warranty period, send it in for repair or live at 2/3rds speed. I have something on the order of 150 S9s and have 7 with single board failures. For me, it was not worth the downtime to send them in for repair.
Hi All,
Suddenly i saw that the is board missing in the miner status
https://ibb.co/cYTZw7
What could be the reason for that ?
I'v already tried to reboot it & Reset
I'v tried with different PSU from different S9
any suggestions ?
Moderator's note: This post was edited by frodocooper to add code tags.
Suddenly i saw that the is board missing in the miner status
https://ibb.co/cYTZw7
What could be the reason for that ?
I'v already tried to reboot it & Reset
I'v tried with different PSU from different S9
any suggestions ?
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000309] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80x30
[ 0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040209] pid_max: default: 32768 minimum: 301
[ 0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042621] CPU: Testing write buffer coherency: ok
[ 0.042972] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043032] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043256] L310 cache controller enabled
[ 0.043276] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121040] CPU1: Booted secondary processor
[ 0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210361] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210389] CPU: All CPU(s) started in SVC mode.
[ 0.211060] devtmpfs: initialized
[ 0.213488] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214734] regulator-dummy: no parameters
[ 0.223755] NET: Registered protocol family 16
[ 0.226069] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228383] cpuidle: using governor ladder
[ 0.228396] cpuidle: using governor menu
[ 0.235902] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237434] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237448] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237567] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259667] bio: create slab at 0
[ 0.261420] vgaarb: loaded
[ 0.262139] SCSI subsystem initialized
[ 0.263047] usbcore: registered new interface driver usbfs
[ 0.263219] usbcore: registered new interface driver hub
[ 0.263450] usbcore: registered new device driver usb
[ 0.263979] media: Linux media interface: v0.10
[ 0.264137] Linux video capture interface: v2.00
[ 0.264394] pps_core: LinuxPPS API ver. 1 registered
[ 0.264406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264536] PTP clock support registered
[ 0.264905] EDAC MC: Ver: 3.0.0
[ 0.265974] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268996] DMA-API: preallocated 4096 debug entries
[ 0.269012] DMA-API: debugging enabled by kernel config
[ 0.269101] Switched to clocksource arm_global_timer
[ 0.290545] NET: Registered protocol family 2
[ 0.291222] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291279] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291365] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291413] TCP: reno registered
[ 0.291433] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291466] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291716] NET: Registered protocol family 1
[ 0.292080] RPC: Registered named UNIX socket transport module.
[ 0.292093] RPC: Registered udp transport module.
[ 0.292102] RPC: Registered tcp transport module.
[ 0.292110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.292124] PCI: CLS 0 bytes, default 64
[ 0.292600] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294676] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296810] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[ 0.297007] msgmni has been set to 967
[ 0.297809] io scheduler noop registered
[ 0.297822] io scheduler deadline registered
[ 0.297864] io scheduler cfq registered (default)
[ 0.309806] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.309827] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.436532] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003942] console [ttyPS0] enabled
[ 1.008249] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015904] [drm] Initialized drm 1.1.0 20060810
[ 1.033125] brd: module loaded
[ 1.042569] loop: module loaded
[ 1.052204] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057955] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065931] libphy: XEMACPS mii bus: probed
[ 1.070643] ------------- phy_id = 0x3625e62
[ 1.075402] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.084064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.090729] ehci-pci: EHCI PCI platform driver
[ 1.097947] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104780] usbcore: registered new interface driver usb-storage
[ 1.111655] mousedev: PS/2 mouse device common for all mice
[ 1.117752] i2c /dev entries driver
[ 1.124764] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130375] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.136272] Xilinx Zynq CpuIdle Driver started
[ 1.141144] sdhci: Secure Digital Host Controller Interface driver
[ 1.147237] sdhci: Copyright(c) Pierre Ossman
[ 1.151648] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158388] mmc0: no vqmmc regulator found
[ 1.162432] mmc0: no vmmc regulator found
[ 1.199119] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207805] usbcore: registered new interface driver usbhid
[ 1.213321] usbhid: USB HID core driver
[ 1.218037] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224329] nand: Micron MT29F2G08ABAEAWP
[ 1.228303] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234251] Bad block table found at page 131008, version 0x01
[ 1.240474] Bad block table found at page 130944, version 0x01
[ 1.246523] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252288] Creating 3 MTD partitions on "pl353-nand":
[ 1.257394] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265500] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272824] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281846] TCP: cubic registered
[ 1.285080] NET: Registered protocol family 17
[ 1.289826] Registering SWP/SWPB emulation handler
[ 1.295754] regulator-dummy: disabling
[ 1.300162] UBI: attaching mtd1 to ubi0
[ 1.828141] UBI: scanning is finished
[ 1.839852] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.846909] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.853705] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.860382] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.867219] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.873229] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.880340] UBI: max/mean erase counter: 10/5, WL threshold: 4096, image sequence number: 1283732989
[ 1.889457] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.898654] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.898659] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.902707] ALSA device list:
[ 1.902711] No soundcards found.
[ 1.919173] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.980745] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.986675] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.995819] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.005695] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.010733] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.022298] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.029743] devtmpfs: mounted
[ 2.032849] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.880380] random: dd urandom read with 0 bits of entropy available
[ 3.279124]
[ 3.279124] bcm54xx_config_init
[ 3.889131]
[ 3.889131] bcm54xx_config_init
[ 6.889955] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.896050] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 30.418331] In axi fpga driver!
[ 30.421422] request_mem_region OK!
[ 30.424791] AXI fpga dev virtual address is 0xdf9fc000
[ 30.429917] *base_vir_addr = 0x8c510
[ 30.445791] In fpga mem driver!
[ 30.448862] request_mem_region OK!
[ 30.452487] fpga mem virtual address is 0xe2000000
[ 31.249156]
[ 31.249156] bcm54xx_config_init
[ 31.879118]
[ 31.879118] bcm54xx_config_init
[ 34.879991] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 34.886011] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 259.277950] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 810c544e5740881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[55] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=57 on chain[6], value=910
get PIC voltage=57 on chain[7], value=910
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1351 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 810c544e5740881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=4440
get fan[2] speed=5880
get fan[5] speed=4440
get fan[2] speed=5880
get fan[5] speed=4440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=910
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=910
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=57 value=910
Chain[J8] orignal chain_voltage_pic=57 value=910
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[55] has core num=1
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
miner total rate=13235GH/s fixed rate=13000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:6 max freq=606
Chain:6 min freq=606
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=606
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:612
Asic[ 1]:612 Asic[ 2]:612 Asic[ 3]:612 Asic[ 4]:612 Asic[ 5]:612 Asic[ 6]:612 Asic[ 7]:612 Asic[ 8]:612
Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612 Asic[16]:618
Asic[17]:618 Asic[18]:618 Asic[19]:618 Asic[20]:618 Asic[21]:618 Asic[22]:618 Asic[23]:618 Asic[24]:618
Asic[25]:618 Asic[26]:618 Asic[27]:618 Asic[28]:618 Asic[29]:618 Asic[30]:618 Asic[31]:618 Asic[32]:618
Asic[33]:618 Asic[34]:618 Asic[35]:618 Asic[36]:618 Asic[37]:618 Asic[38]:618 Asic[39]:618 Asic[40]:618
Asic[41]:618 Asic[42]:618 Asic[43]:618 Asic[44]:618 Asic[45]:618 Asic[46]:618 Asic[47]:618 Asic[48]:618
Asic[49]:618 Asic[50]:618 Asic[51]:618 Asic[52]:618 Asic[53]:618 Asic[54]:618 Asic[55]:618 Asic[56]:618
Asic[57]:618 Asic[58]:618 Asic[59]:618 Asic[60]:618 Asic[61]:618 Asic[62]:618
Chain:5 max freq=618
Chain:5 min freq=612
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:6 max freq=606
Chain:6 min freq=606
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=606
max freq = 618
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:30 remote:-70 offset:-126, will fixed offset=27
New offset Chain[5] chip[244] local:30 remote:-70 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:28 remote:-77 offset:-121, will fixed offset=27
New offset Chain[6] chip[244] local:28 remote:-77 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[7] chip[244] local:31 remote:-69 offset:-126, will fixed offset=27
New offset Chain[7] chip[244] local:31 remote:-69 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
single board rate=4426 voltage limit=910 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 910
single board rate=4352 voltage limit=910 on chain[6]
get PIC voltage=910 on chain[6], check: must be < 910
single board rate=4352 voltage limit=910 on chain[7]
get PIC voltage=910 on chain[7], check: must be < 910
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=910 [57]
Chain[J8] set working voltage=910 [57]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=612 freq[01]=612 freq[02]=612 freq[03]=612 freq[04]=612 freq[05]=612 freq[06]=612 freq[07]=612
freq[08]=612 freq[09]=612 freq[10]=612 freq[11]=612 freq[12]=612 freq[13]=612 freq[14]=612 freq[15]=612
freq[16]=618 freq[17]=618 freq[18]=618 freq[19]=618 freq[20]=618 freq[21]=618 freq[22]=618 freq[23]=618
freq[24]=618 freq[25]=618 freq[26]=618 freq[27]=618 freq[28]=618 freq[29]=618 freq[30]=618 freq[31]=618
freq[32]=618 freq[33]=618 freq[34]=618 freq[35]=618 freq[36]=618 freq[37]=618 freq[38]=618 freq[39]=618
freq[40]=618 freq[41]=618 freq[42]=618 freq[43]=618 freq[44]=618 freq[45]=618 freq[46]=618 freq[47]=618
freq[48]=618 freq[49]=618 freq[50]=618 freq[51]=618 freq[52]=618 freq[53]=618 freq[54]=618 freq[55]=618
freq[56]=618 freq[57]=618 freq[58]=618 freq[59]=618 freq[60]=618 freq[61]=618 freq[62]=618
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25286
last_nonce_num:42701
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24872
last_nonce_num:25567
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24874
last_nonce_num:34407
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=175 total_tv_end_sys=176
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=67.0920 Asic[02]=71.1680 Asic[03]=73.2150 Asic[04]=73.0310 Asic[05]=69.8430 Asic[06]=69.0710 Asic[07]=70.2790 Asic[08]=68.7190
Asic[09]=71.1010 Asic[10]=71.8560 Asic[11]=70.7320 Asic[12]=72.3930 Asic[13]=71.5540 Asic[14]=65.6820 Asic[15]=66.5040 Asic[16]=72.6450
Asic[17]=66.1190 Asic[18]=66.7730 Asic[19]=69.3230 Asic[20]=70.6480 Asic[21]=70.1110 Asic[22]=72.4770 Asic[23]=73.5510 Asic[24]=70.7150
Asic[25]=74.3230 Asic[26]=63.6520 Asic[27]=77.9460 Asic[28]=67.4270 Asic[29]=76.6380 Asic[30]=71.1680 Asic[31]=65.6490 Asic[32]=69.2890
Asic[33]=70.4470 Asic[34]=66.3870 Asic[35]=70.7490 Asic[36]=66.7060 Asic[37]=70.4300 Asic[38]=70.4640 Asic[39]=75.2120 Asic[40]=68.2160
Asic[41]=63.4840 Asic[42]=76.3530 Asic[43]=73.9700 Asic[44]=66.1020 Asic[45]=75.1280 Asic[46]=65.4810 Asic[47]=73.1980 Asic[48]=69.4910
Asic[49]=65.5310 Asic[50]=70.0610 Asic[51]=77.8790 Asic[52]=71.7050 Asic[53]=73.4500 Asic[54]=70.3130 Asic[55]=71.7890 Asic[56]=71.0340
Asic[57]=70.9000 Asic[58]=69.0040 Asic[59]=69.8090 Asic[60]=72.7460 Asic[61]=70.2790 Asic[62]=69.0380 Asic[63]=69.7590
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=69.6920 Asic[02]=69.4570 Asic[03]=63.2660 Asic[04]=70.6150 Asic[05]=68.7190 Asic[06]=67.7120 Asic[07]=69.6250 Asic[08]=71.9910
Asic[09]=69.4070 Asic[10]=75.9000 Asic[11]=66.3370 Asic[12]=69.9600 Asic[13]=63.1820 Asic[14]=67.1590 Asic[15]=68.0480 Asic[16]=68.8030
Asic[17]=67.9300 Asic[18]=70.7150 Asic[19]=70.8500 Asic[20]=65.1620 Asic[21]=71.7720 Asic[22]=75.6310 Asic[23]=71.5380 Asic[24]=67.1250
Asic[25]=69.4570 Asic[26]=68.9870 Asic[27]=71.5880 Asic[28]=67.5280 Asic[29]=68.3330 Asic[30]=62.5280 Asic[31]=69.8260 Asic[32]=68.7530
Asic[33]=67.9980 Asic[34]=68.7860 Asic[35]=64.4740 Asic[36]=65.7160 Asic[37]=70.0780 Asic[38]=65.5820 Asic[39]=70.7830 Asic[40]=66.4040
Asic[41]=69.9600 Asic[42]=72.0070 Asic[43]=67.0750 Asic[44]=65.0780 Asic[45]=71.1520 Asic[46]=65.3800 Asic[47]=67.9640 Asic[48]=65.1790
Asic[49]=68.2160 Asic[50]=71.7220 Asic[51]=70.0440 Asic[52]=63.7360 Asic[53]=69.1220 Asic[54]=73.0470 Asic[55]=68.8700 Asic[56]=64.3900
Asic[57]=70.7660 Asic[58]=64.1560 Asic[59]=67.9300 Asic[60]=73.3330 Asic[61]=66.9570 Asic[62]=66.8570 Asic[63]=75.8660
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=67.4100 Asic[02]=72.4440 Asic[03]=68.5680 Asic[04]=68.0140 Asic[05]=71.7050 Asic[06]=71.0170 Asic[07]=68.7360 Asic[08]=66.1020
Asic[09]=68.4510 Asic[10]=61.9910 Asic[11]=68.6520 Asic[12]=66.3030 Asic[13]=69.7590 Asic[14]=66.1690 Asic[15]=74.1210 Asic[16]=71.8730
Asic[17]=71.2020 Asic[18]=72.1080 Asic[19]=71.6550 Asic[20]=72.4270 Asic[21]=66.0180 Asic[22]=73.3160 Asic[23]=69.6590 Asic[24]=67.3600
Asic[25]=71.5380 Asic[26]=67.0410 Asic[27]=72.1250 Asic[28]=60.3640 Asic[29]=73.9200 Asic[30]=71.9910 Asic[31]=66.4880 Asic[32]=68.2830
Asic[33]=65.3640 Asic[34]=71.4700 Asic[35]=73.5000 Asic[36]=67.3600 Asic[37]=70.4300 Asic[38]=67.2760 Asic[39]=70.5140 Asic[40]=66.9410
Asic[41]=71.6050 Asic[42]=69.4400 Asic[43]=70.6320 Asic[44]=70.9500 Asic[45]=70.2120 Asic[46]=63.3840 Asic[47]=69.8930 Asic[48]=71.0010
Asic[49]=72.2930 Asic[50]=70.4640 Asic[51]=72.4770 Asic[52]=75.0940 Asic[53]=70.3800 Asic[54]=71.0680 Asic[55]=70.0280 Asic[56]=67.0750
Asic[57]=67.4940 Asic[58]=64.6090 Asic[59]=73.0470 Asic[60]=73.0140 Asic[61]=69.4570 Asic[62]=66.9070 Asic[63]=68.2660
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=1a middle offset=27
Chain[5] Chip[62] local Temp=60
read failed on Chain[5] Chip[62] middle Temp old value:75
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=1a middle offset=27
Chain[6] Chip[62] local Temp=59
read failed on Chain[6] Chip[62] middle Temp old value:74
Special fix Chain[6] Chip[62] middle Temp = 74
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=1a middle offset=27
Chain[7] Chip[62] local Temp=62
read failed on Chain[7] Chip[62] middle Temp old value:77
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000309] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80x30
[ 0.000655] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040209] pid_max: default: 32768 minimum: 301
[ 0.040434] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042621] CPU: Testing write buffer coherency: ok
[ 0.042972] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043032] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.043256] L310 cache controller enabled
[ 0.043276] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121040] CPU1: Booted secondary processor
[ 0.210229] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210361] Brought up 2 CPUs
[ 0.210380] SMP: Total of 2 processors activated.
[ 0.210389] CPU: All CPU(s) started in SVC mode.
[ 0.211060] devtmpfs: initialized
[ 0.213488] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214734] regulator-dummy: no parameters
[ 0.223755] NET: Registered protocol family 16
[ 0.226069] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228383] cpuidle: using governor ladder
[ 0.228396] cpuidle: using governor menu
[ 0.235902] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237434] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237448] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237567] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259667] bio: create slab
[ 0.261420] vgaarb: loaded
[ 0.262139] SCSI subsystem initialized
[ 0.263047] usbcore: registered new interface driver usbfs
[ 0.263219] usbcore: registered new interface driver hub
[ 0.263450] usbcore: registered new device driver usb
[ 0.263979] media: Linux media interface: v0.10
[ 0.264137] Linux video capture interface: v2.00
[ 0.264394] pps_core: LinuxPPS API ver. 1 registered
[ 0.264406] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 0.264536] PTP clock support registered
[ 0.264905] EDAC MC: Ver: 3.0.0
[ 0.265974] Advanced Linux Sound Architecture Driver Initialized.
[ 0.268996] DMA-API: preallocated 4096 debug entries
[ 0.269012] DMA-API: debugging enabled by kernel config
[ 0.269101] Switched to clocksource arm_global_timer
[ 0.290545] NET: Registered protocol family 2
[ 0.291222] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.291279] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.291365] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.291413] TCP: reno registered
[ 0.291433] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291466] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.291716] NET: Registered protocol family 1
[ 0.292080] RPC: Registered named UNIX socket transport module.
[ 0.292093] RPC: Registered udp transport module.
[ 0.292102] RPC: Registered tcp transport module.
[ 0.292110] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.292124] PCI: CLS 0 bytes, default 64
[ 0.292600] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.294676] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.296810] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[ 0.297007] msgmni has been set to 967
[ 0.297809] io scheduler noop registered
[ 0.297822] io scheduler deadline registered
[ 0.297864] io scheduler cfq registered (default)
[ 0.309806] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.309827] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.436532] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.003942] console [ttyPS0] enabled
[ 1.008249] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.015904] [drm] Initialized drm 1.1.0 20060810
[ 1.033125] brd: module loaded
[ 1.042569] loop: module loaded
[ 1.052204] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.057955] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.065931] libphy: XEMACPS mii bus: probed
[ 1.070643] ------------- phy_id = 0x3625e62
[ 1.075402] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.084064] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.090729] ehci-pci: EHCI PCI platform driver
[ 1.097947] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.104780] usbcore: registered new interface driver usb-storage
[ 1.111655] mousedev: PS/2 mouse device common for all mice
[ 1.117752] i2c /dev entries driver
[ 1.124764] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.130375] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.136272] Xilinx Zynq CpuIdle Driver started
[ 1.141144] sdhci: Secure Digital Host Controller Interface driver
[ 1.147237] sdhci: Copyright(c) Pierre Ossman
[ 1.151648] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.158388] mmc0: no vqmmc regulator found
[ 1.162432] mmc0: no vmmc regulator found
[ 1.199119] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.207805] usbcore: registered new interface driver usbhid
[ 1.213321] usbhid: USB HID core driver
[ 1.218037] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224329] nand: Micron MT29F2G08ABAEAWP
[ 1.228303] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234251] Bad block table found at page 131008, version 0x01
[ 1.240474] Bad block table found at page 130944, version 0x01
[ 1.246523] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252288] Creating 3 MTD partitions on "pl353-nand":
[ 1.257394] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265500] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.272824] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.281846] TCP: cubic registered
[ 1.285080] NET: Registered protocol family 17
[ 1.289826] Registering SWP/SWPB emulation handler
[ 1.295754] regulator-dummy: disabling
[ 1.300162] UBI: attaching mtd1 to ubi0
[ 1.828141] UBI: scanning is finished
[ 1.839852] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.846909] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.853705] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.860382] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.867219] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.873229] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.880340] UBI: max/mean erase counter: 10/5, WL threshold: 4096, image sequence number: 1283732989
[ 1.889457] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.898654] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.898659] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.902707] ALSA device list:
[ 1.902711] No soundcards found.
[ 1.919173] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.980745] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.986675] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 1.995819] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.005695] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.010733] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model
[ 2.022298] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.029743] devtmpfs: mounted
[ 2.032849] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.880380] random: dd urandom read with 0 bits of entropy available
[ 3.279124]
[ 3.279124] bcm54xx_config_init
[ 3.889131]
[ 3.889131] bcm54xx_config_init
[ 6.889955] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.896050] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 30.418331] In axi fpga driver!
[ 30.421422] request_mem_region OK!
[ 30.424791] AXI fpga dev virtual address is 0xdf9fc000
[ 30.429917] *base_vir_addr = 0x8c510
[ 30.445791] In fpga mem driver!
[ 30.448862] request_mem_region OK!
[ 30.452487] fpga mem virtual address is 0xe2000000
[ 31.249156]
[ 31.249156] bcm54xx_config_init
[ 31.879118]
[ 31.879118] bcm54xx_config_init
[ 34.879991] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 34.886011] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 259.277950] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 810c544e5740881c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[55] has core num=1
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=57 on chain[6], value=910
get PIC voltage=57 on chain[7], value=910
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1351 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 810c544e5740881c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=4440
get fan[2] speed=5880
get fan[5] speed=4440
get fan[2] speed=5880
get fan[5] speed=4440
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=910
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=910
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=57 value=910
Chain[J8] orignal chain_voltage_pic=57 value=910
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[55] has core num=1
Chain[J7] has core num in PIC
Chain[J8] has core num in PIC
miner total rate=13235GH/s fixed rate=13000GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:5 max freq=631
Chain:5 min freq=631
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:6 max freq=606
Chain:6 min freq=606
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=606
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=631
Asic[ 0]:612
Asic[ 1]:612 Asic[ 2]:612 Asic[ 3]:612 Asic[ 4]:612 Asic[ 5]:612 Asic[ 6]:612 Asic[ 7]:612 Asic[ 8]:612
Asic[ 9]:612 Asic[10]:612 Asic[11]:612 Asic[12]:612 Asic[13]:612 Asic[14]:612 Asic[15]:612 Asic[16]:618
Asic[17]:618 Asic[18]:618 Asic[19]:618 Asic[20]:618 Asic[21]:618 Asic[22]:618 Asic[23]:618 Asic[24]:618
Asic[25]:618 Asic[26]:618 Asic[27]:618 Asic[28]:618 Asic[29]:618 Asic[30]:618 Asic[31]:618 Asic[32]:618
Asic[33]:618 Asic[34]:618 Asic[35]:618 Asic[36]:618 Asic[37]:618 Asic[38]:618 Asic[39]:618 Asic[40]:618
Asic[41]:618 Asic[42]:618 Asic[43]:618 Asic[44]:618 Asic[45]:618 Asic[46]:618 Asic[47]:618 Asic[48]:618
Asic[49]:618 Asic[50]:618 Asic[51]:618 Asic[52]:618 Asic[53]:618 Asic[54]:618 Asic[55]:618 Asic[56]:618
Asic[57]:618 Asic[58]:618 Asic[59]:618 Asic[60]:618 Asic[61]:618 Asic[62]:618
Chain:5 max freq=618
Chain:5 min freq=612
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:6 max freq=606
Chain:6 min freq=606
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=606
Asic[ 0]:606
Asic[ 1]:606 Asic[ 2]:606 Asic[ 3]:606 Asic[ 4]:606 Asic[ 5]:606 Asic[ 6]:606 Asic[ 7]:606 Asic[ 8]:606
Asic[ 9]:606 Asic[10]:606 Asic[11]:606 Asic[12]:606 Asic[13]:606 Asic[14]:606 Asic[15]:606 Asic[16]:606
Asic[17]:606 Asic[18]:606 Asic[19]:606 Asic[20]:606 Asic[21]:606 Asic[22]:606 Asic[23]:606 Asic[24]:606
Asic[25]:606 Asic[26]:606 Asic[27]:606 Asic[28]:606 Asic[29]:606 Asic[30]:606 Asic[31]:606 Asic[32]:606
Asic[33]:606 Asic[34]:606 Asic[35]:606 Asic[36]:606 Asic[37]:606 Asic[38]:606 Asic[39]:606 Asic[40]:606
Asic[41]:606 Asic[42]:606 Asic[43]:606 Asic[44]:606 Asic[45]:606 Asic[46]:606 Asic[47]:606 Asic[48]:606
Asic[49]:606 Asic[50]:606 Asic[51]:606 Asic[52]:606 Asic[53]:606 Asic[54]:606 Asic[55]:606 Asic[56]:606
Asic[57]:606 Asic[58]:606 Asic[59]:606 Asic[60]:606 Asic[61]:606 Asic[62]:606
Chain:7 max freq=606
Chain:7 min freq=606
max freq = 618
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[5] chip[244] local:30 remote:-70 offset:-126, will fixed offset=27
New offset Chain[5] chip[244] local:30 remote:-70 offset:27
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[6] chip[244] local:28 remote:-77 offset:-121, will fixed offset=27
New offset Chain[6] chip[244] local:28 remote:-77 offset:27
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
Warning: Chain[7] chip[244] local:31 remote:-69 offset:-126, will fixed offset=27
New offset Chain[7] chip[244] local:31 remote:-69 offset:27
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
single board rate=4426 voltage limit=910 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 910
single board rate=4352 voltage limit=910 on chain[6]
get PIC voltage=910 on chain[6], check: must be < 910
single board rate=4352 voltage limit=910 on chain[7]
get PIC voltage=910 on chain[7], check: must be < 910
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=910 [57]
Chain[J8] set working voltage=910 [57]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=612 freq[01]=612 freq[02]=612 freq[03]=612 freq[04]=612 freq[05]=612 freq[06]=612 freq[07]=612
freq[08]=612 freq[09]=612 freq[10]=612 freq[11]=612 freq[12]=612 freq[13]=612 freq[14]=612 freq[15]=612
freq[16]=618 freq[17]=618 freq[18]=618 freq[19]=618 freq[20]=618 freq[21]=618 freq[22]=618 freq[23]=618
freq[24]=618 freq[25]=618 freq[26]=618 freq[27]=618 freq[28]=618 freq[29]=618 freq[30]=618 freq[31]=618
freq[32]=618 freq[33]=618 freq[34]=618 freq[35]=618 freq[36]=618 freq[37]=618 freq[38]=618 freq[39]=618
freq[40]=618 freq[41]=618 freq[42]=618 freq[43]=618 freq[44]=618 freq[45]=618 freq[46]=618 freq[47]=618
freq[48]=618 freq[49]=618 freq[50]=618 freq[51]=618 freq[52]=618 freq[53]=618 freq[54]=618 freq[55]=618
freq[56]=618 freq[57]=618 freq[58]=618 freq[59]=618 freq[60]=618 freq[61]=618 freq[62]=618
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25286
last_nonce_num:42701
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24872
last_nonce_num:25567
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=606 freq[01]=606 freq[02]=606 freq[03]=606 freq[04]=606 freq[05]=606 freq[06]=606 freq[07]=606
freq[08]=606 freq[09]=606 freq[10]=606 freq[11]=606 freq[12]=606 freq[13]=606 freq[14]=606 freq[15]=606
freq[16]=606 freq[17]=606 freq[18]=606 freq[19]=606 freq[20]=606 freq[21]=606 freq[22]=606 freq[23]=606
freq[24]=606 freq[25]=606 freq[26]=606 freq[27]=606 freq[28]=606 freq[29]=606 freq[30]=606 freq[31]=606
freq[32]=606 freq[33]=606 freq[34]=606 freq[35]=606 freq[36]=606 freq[37]=606 freq[38]=606 freq[39]=606
freq[40]=606 freq[41]=606 freq[42]=606 freq[43]=606 freq[44]=606 freq[45]=606 freq[46]=606 freq[47]=606
freq[48]=606 freq[49]=606 freq[50]=606 freq[51]=606 freq[52]=606 freq[53]=606 freq[54]=606 freq[55]=606
freq[56]=606 freq[57]=606 freq[58]=606 freq[59]=606 freq[60]=606 freq[61]=606 freq[62]=606
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:24874
last_nonce_num:34407
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: OK!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: OK!
setStartTimePoint total_tv_start_sys=175 total_tv_end_sys=176
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=67.0920 Asic[02]=71.1680 Asic[03]=73.2150 Asic[04]=73.0310 Asic[05]=69.8430 Asic[06]=69.0710 Asic[07]=70.2790 Asic[08]=68.7190
Asic[09]=71.1010 Asic[10]=71.8560 Asic[11]=70.7320 Asic[12]=72.3930 Asic[13]=71.5540 Asic[14]=65.6820 Asic[15]=66.5040 Asic[16]=72.6450
Asic[17]=66.1190 Asic[18]=66.7730 Asic[19]=69.3230 Asic[20]=70.6480 Asic[21]=70.1110 Asic[22]=72.4770 Asic[23]=73.5510 Asic[24]=70.7150
Asic[25]=74.3230 Asic[26]=63.6520 Asic[27]=77.9460 Asic[28]=67.4270 Asic[29]=76.6380 Asic[30]=71.1680 Asic[31]=65.6490 Asic[32]=69.2890
Asic[33]=70.4470 Asic[34]=66.3870 Asic[35]=70.7490 Asic[36]=66.7060 Asic[37]=70.4300 Asic[38]=70.4640 Asic[39]=75.2120 Asic[40]=68.2160
Asic[41]=63.4840 Asic[42]=76.3530 Asic[43]=73.9700 Asic[44]=66.1020 Asic[45]=75.1280 Asic[46]=65.4810 Asic[47]=73.1980 Asic[48]=69.4910
Asic[49]=65.5310 Asic[50]=70.0610 Asic[51]=77.8790 Asic[52]=71.7050 Asic[53]=73.4500 Asic[54]=70.3130 Asic[55]=71.7890 Asic[56]=71.0340
Asic[57]=70.9000 Asic[58]=69.0040 Asic[59]=69.8090 Asic[60]=72.7460 Asic[61]=70.2790 Asic[62]=69.0380 Asic[63]=69.7590
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=69.6920 Asic[02]=69.4570 Asic[03]=63.2660 Asic[04]=70.6150 Asic[05]=68.7190 Asic[06]=67.7120 Asic[07]=69.6250 Asic[08]=71.9910
Asic[09]=69.4070 Asic[10]=75.9000 Asic[11]=66.3370 Asic[12]=69.9600 Asic[13]=63.1820 Asic[14]=67.1590 Asic[15]=68.0480 Asic[16]=68.8030
Asic[17]=67.9300 Asic[18]=70.7150 Asic[19]=70.8500 Asic[20]=65.1620 Asic[21]=71.7720 Asic[22]=75.6310 Asic[23]=71.5380 Asic[24]=67.1250
Asic[25]=69.4570 Asic[26]=68.9870 Asic[27]=71.5880 Asic[28]=67.5280 Asic[29]=68.3330 Asic[30]=62.5280 Asic[31]=69.8260 Asic[32]=68.7530
Asic[33]=67.9980 Asic[34]=68.7860 Asic[35]=64.4740 Asic[36]=65.7160 Asic[37]=70.0780 Asic[38]=65.5820 Asic[39]=70.7830 Asic[40]=66.4040
Asic[41]=69.9600 Asic[42]=72.0070 Asic[43]=67.0750 Asic[44]=65.0780 Asic[45]=71.1520 Asic[46]=65.3800 Asic[47]=67.9640 Asic[48]=65.1790
Asic[49]=68.2160 Asic[50]=71.7220 Asic[51]=70.0440 Asic[52]=63.7360 Asic[53]=69.1220 Asic[54]=73.0470 Asic[55]=68.8700 Asic[56]=64.3900
Asic[57]=70.7660 Asic[58]=64.1560 Asic[59]=67.9300 Asic[60]=73.3330 Asic[61]=66.9570 Asic[62]=66.8570 Asic[63]=75.8660
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=67.4100 Asic[02]=72.4440 Asic[03]=68.5680 Asic[04]=68.0140 Asic[05]=71.7050 Asic[06]=71.0170 Asic[07]=68.7360 Asic[08]=66.1020
Asic[09]=68.4510 Asic[10]=61.9910 Asic[11]=68.6520 Asic[12]=66.3030 Asic[13]=69.7590 Asic[14]=66.1690 Asic[15]=74.1210 Asic[16]=71.8730
Asic[17]=71.2020 Asic[18]=72.1080 Asic[19]=71.6550 Asic[20]=72.4270 Asic[21]=66.0180 Asic[22]=73.3160 Asic[23]=69.6590 Asic[24]=67.3600
Asic[25]=71.5380 Asic[26]=67.0410 Asic[27]=72.1250 Asic[28]=60.3640 Asic[29]=73.9200 Asic[30]=71.9910 Asic[31]=66.4880 Asic[32]=68.2830
Asic[33]=65.3640 Asic[34]=71.4700 Asic[35]=73.5000 Asic[36]=67.3600 Asic[37]=70.4300 Asic[38]=67.2760 Asic[39]=70.5140 Asic[40]=66.9410
Asic[41]=71.6050 Asic[42]=69.4400 Asic[43]=70.6320 Asic[44]=70.9500 Asic[45]=70.2120 Asic[46]=63.3840 Asic[47]=69.8930 Asic[48]=71.0010
Asic[49]=72.2930 Asic[50]=70.4640 Asic[51]=72.4770 Asic[52]=75.0940 Asic[53]=70.3800 Asic[54]=71.0680 Asic[55]=70.0280 Asic[56]=67.0750
Asic[57]=67.4940 Asic[58]=64.6090 Asic[59]=73.0470 Asic[60]=73.0140 Asic[61]=69.4570 Asic[62]=66.9070 Asic[63]=68.2660
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=1a middle offset=27
Chain[5] Chip[62] local Temp=60
read failed on Chain[5] Chip[62] middle Temp old value:75
Special fix Chain[5] Chip[62] middle Temp = 75
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=1a middle offset=27
Chain[6] Chip[62] local Temp=59
read failed on Chain[6] Chip[62] middle Temp old value:74
Special fix Chain[6] Chip[62] middle Temp = 74
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=1a middle offset=27
Chain[7] Chip[62] local Temp=62
read failed on Chain[7] Chip[62] middle Temp old value:77
Special fix Chain[7] Chip[62] middle Temp = 77
Done read temp on Chain[7]
set FAN speed according to: temp_highest=62 temp_top1[PWM_T]=62 temp_top1[TEMP_POS_LOCAL]=62 temp_change=0 fix_fan_steps=0
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
Moderator's note: This post was edited by frodocooper to add code tags.
Jump to: