Author

Topic: Mixing your gpus. MY thread on r9 390's with rx 480's any mismatch is welcome. (Read 2709 times)

full member
Activity: 140
Merit: 100
can u kindly share your settings for greater hashower?
sr. member
Activity: 429
Merit: 250
whats ur settings for the 390 in claymore?
legendary
Activity: 1596
Merit: 1000
All GCN AMD cards can be mixed and mined with without issue. I've mixed 7950/7970/280x/290/290x/390/390x/RX480 all without issue. It's nothing complicated.

That said, I prefer keeping similar cards together.
newbie
Activity: 14
Merit: 0
Hi,I see your 390's speed is 32mh,can u tell me how to tweak it?THX Grin
legendary
Activity: 4326
Merit: 8950
'The right to privacy matters'
Okay  you got a r9 390  and low and behold you scored a hard to get rx 480.

You want to run the cards on your rig.  I am getting really good results.

With amd 16.7.2 and with Claymore dual miner only eth coins.

BTW eth is over 13 usd a coin up up and awayyyy!!!

Give me time to set this up.

I self mod but I almost never delete.

so here is my mixed rig.

1 r9 390 with 1 rx 480

a gigabyte b75m mother board
2  4gb sticks of ram
a silverstone 700 watt titanium psu
a corsair case? Don't remember
case fans are silverstone 141's
cpu  is intel i5 2500t
 got to check this as I can not remember since i have a few pc's

this shows I am running around 56-58 mh with the two cards


power is from my 240 volt pdu reads 2.1 amps  so 504 watts.

I have overclock the r9 390 hard.


the rig is in the closer case


overclocked  r9 390   and   stock clock rx 480  (power limits at -28%)


So use amd 16.7.2  go to amd settings and click gaming




next click Global Settings



this brings up the r9 390 and the rx 480

Jump to: