Mobo showing error 19 FF | Bitcointalksearch.org

DrG

legendary

Activity: 2086

Merit: 1035

Quote from: DebitMe on April 12, 2013, 06:50:21 AM

Im looking at this, and it seems that the computer has to start up in order to do this. The problem lies in the fact that the GPU isnt outputting any video. Nothing comes up on the screen when we try to boot.

Any other suggestions?

Well if it's a BIOS issue the only way to flash it would be to put in an older CPU, flash it, then put the newer one back in. You can't flash on the new CPU since the machine can't handle the new one prior to flashing.

Try a different video card or RAM. Sometimes these fancy overclocking RAM aren't tolerated by boards on initial boot.

DebitMe

legendary

Activity: 2800

Merit: 1012

Get Paid Crypto To Walk or Drive

Im looking at this, and it seems that the computer has to start up in order to do this. The problem lies in the fact that the GPU isnt outputting any video. Nothing comes up on the screen when we try to boot.

Any other suggestions?

MashRinx

sr. member

Activity: 389

Merit: 250

Here is the "How to flash the BIOS" page from MSI that will hopefully help get you started: http://us.msi.com/service/biosupdate/

It appears that there is a V1 and V2 of that particular motherboard and I can't offer much in the way of telling which you have, sorry.

Flashing a BIOS incorrectly can cause problems or kill a MB. Even on the page linked above, it pays "don't flash if everything is working okay." Obviously, you're trying to solve an issue, but just be very careful and double-check what you are flashing, and how before you try. Usually BIOS flashing programs I have used in the past will warn you if you are trying to apply an update that does not fit your hardware, but I can't say that will happen in all cases.

Good luck!

DebitMe

legendary

Activity: 2800

Merit: 1012

Get Paid Crypto To Walk or Drive

It came from a third party vendor, my friend might know how to do that, but in case he doesnt, how do you flash a BIOS?

Also, any idea now that I put one of the 7950's in a computer that has been happily hashing away for some months with 2 5850's a 6870 and a 6790 (replaced one of the 5850's), why the drivers will not install?

DrG

legendary

Activity: 2086

Merit: 1035

Did you buy the Mobo direct from Amazon or 3rd party vendor.

3rd party vendor might have had really old stock and you might need to flash the BIOS to support the newer chip. But I thought the 990 chipset supported the 4100 (maybe not the 890).

DebitMe

legendary

Activity: 2800

Merit: 1012

Get Paid Crypto To Walk or Drive

Hi all,

I just purchased a 990FXA-GD80 MOBO from amazon and a new
FX 4100 Black Edition 3.6GHz Quad-Core Socket AM3+ Boxed Processor
from Microcenter. Also purchased are 3 new 7950's (2 Gigabyte and 1 Sapphire) and 8 gig of RAM at 1333Mhz with a brand new 750 W PSU.

When trying to run a single GPU with this setup, the onboard LED light shows 19 FF error message, and nothing comes up on the monitor. I researched this a bit and from what people were saying it is the CPU. I am going to exchange the CPU tomorrow, but my question was whether anyone had any other ideas on what it might be?

The MOBO should support this CPU, not sure where but my friend found a list on supported CPU's and this one was on it. So it might have been a bad CPU, but I am not quite sure of the chances of that.

Any help or advice would be helpful. Thanks!

Topic: Mobo showing error 19 FF (Read 1052 times)