risers came
installed all 4 cards (3x 290) and 1x radeon 270x
powered up and I can log in but none will mine
removed the 4th card and all works well
Topic: Mobo with 4 gpus help? Will tip (Read 616 times)
couldn't rd into it
will wait until new risers come
will wait until new risers come
Can you hear the HD spinning for 1-2 minutes as it normally does to boot into Windows? How about RDC/VNC once its booted (assuming it does)?
im going to try and rd into it soon
i'll check on the hdd
Can you hear the HD spinning for 1-2 minutes as it normally does to boot into Windows? How about RDC/VNC once its booted (assuming it does)?
Can you SSH into the machine or ping it?
all the risers are powered
i can't tell because nothing posts to the screen
i can't tell because nothing posts to the screen
Can you tell if you're making it into windows (or if the rig isn't booting past the BIOS)? If its the latter, I'm guessing a riser or slot isn't working. Are any of the risers powered? You might be overloading the mobo if they're unpowered.
I'll tip the person who solves this problem
I have one rig with a
gigabyte ud5 x79
evga 1300 watt psu
3x radeon 290
and I have one radeon 270x I want to use.
Currently I am using the usb3 pcie x1 risers for 2 of the 3 radeons and one radeon is in the pcie x16.
If I connect the radeon 270x via another pcie x1 usb3 riser the pc turns on but nothing shows up on the screen
I have one rig with a
gigabyte ud5 x79
evga 1300 watt psu
3x radeon 290
and I have one radeon 270x I want to use.
Currently I am using the usb3 pcie x1 risers for 2 of the 3 radeons and one radeon is in the pcie x16.
If I connect the radeon 270x via another pcie x1 usb3 riser the pc turns on but nothing shows up on the screen
I'm guessing you're using a linux based OS? I frequently get no video feed when I go from 1 GPU to 2+, BAMT, Xubuntu, etc. I went nuts trying to figure out why and simply gave up. I ended up installing SSH/RDC and after 1 GPU, I connect to the rig remotely to do everything else. Not sure why this happens, but every rig I've setup had the same issue.
I'll tip the person who solves this problem
I have one rig with a
gigabyte ud5 x79
evga 1300 watt psu
3x radeon 290
and I have one radeon 270x I want to use.
Currently I am using the usb3 pcie x1 risers for 2 of the 3 radeons and one radeon is in the pcie x16.
If I connect the radeon 270x via another pcie x1 usb3 riser the pc turns on but nothing shows up on the screen
I have one rig with a
gigabyte ud5 x79
evga 1300 watt psu
3x radeon 290
and I have one radeon 270x I want to use.
Currently I am using the usb3 pcie x1 risers for 2 of the 3 radeons and one radeon is in the pcie x16.
If I connect the radeon 270x via another pcie x1 usb3 riser the pc turns on but nothing shows up on the screen
I'm guessing you're using a linux based OS? I frequently get no video feed when I go from 1 GPU to 2+, BAMT, Xubuntu, etc. I went nuts trying to figure out why and simply gave up. I ended up installing SSH/RDC and after 1 GPU, I connect to the rig remotely to do everything else. Not sure why this happens, but every rig I've setup had the same issue.
I'll tip the person who solves this problem
I have one rig with a
gigabyte ud5 x79
evga 1300 watt psu
3x radeon 290
and I have one radeon 270x I want to use.
Currently I am using the usb3 pcie x1 risers for 2 of the 3 radeons and one radeon is in the pcie x16.
If I connect the radeon 270x via another pcie x1 usb3 riser the pc turns on but nothing shows up on the screen
I have one rig with a
gigabyte ud5 x79
evga 1300 watt psu
3x radeon 290
and I have one radeon 270x I want to use.
Currently I am using the usb3 pcie x1 risers for 2 of the 3 radeons and one radeon is in the pcie x16.
If I connect the radeon 270x via another pcie x1 usb3 riser the pc turns on but nothing shows up on the screen
Jump to: