Topic: Monitor / Controller for Bitmain Antminers (L3,D3,S9) (Read 166 times)
I think everyone can decide if he pays 1,5% for having more features or not...In my case it made a working miner out of a buggy-something. Your comment did not help anything despite calling people idiots - for sure I red the description of Blissz properly. I would appreciate if you would keep useless commments in your mind and bring constructive input. Please also read forum rules. Thank you.
Hi, search for "Blissz Firmware D3" in this forum and you will find a custom firmware where you have a lot of more options to modify and also can put a checkmark at "auto.reboot when xxxx" :-)
that blissz put a fee into that you idiots pay for, and for what? the little bit of editing that he did. its not like he made a new firmware, he took the existing one from bitmain and edited it with some better features and is charging everyone for it. if OP is having issues NOW, theres NO garentee the firmware from blissz will fix the issue he is having, not to mention putting that firmware on it voids the warrenty on the asic if something were to happen
Hi, search for "Blissz Firmware D3" in this forum and you will find a custom firmware where you have a lot of more options to modify and also can put a checkmark at "auto.reboot when xxxx" :-)
hello everyone Smiley
i have a problem with bitmain d3 miner, the hashes drops from 19 to 12 or even to 0.. after i reboot the device it works good for a limited time.. i tried to update firmware but with no changes.. still the same problem. the only one fix is to reboot it manual, but i cant do it often.. i googled some topics and i couldn't find if there is any software that after my config to restart the antminer if hashes drops from 19 to 10..
i have found miner controller from bitmain's website but i don't know what to do..
please people if anyone knows help, if there is a soft to automatically reboot antminer..
i have a problem with bitmain d3 miner, the hashes drops from 19 to 12 or even to 0.. after i reboot the device it works good for a limited time.. i tried to update firmware but with no changes.. still the same problem. the only one fix is to reboot it manual, but i cant do it often.. i googled some topics and i couldn't find if there is any software that after my config to restart the antminer if hashes drops from 19 to 10..
i have found miner controller from bitmain's website but i don't know what to do..
please people if anyone knows help, if there is a soft to automatically reboot antminer..
Jump to: