It just says AMD Accelerated Parallel Processing at the bottom
Mik
Topic: More MHash/s with 5870 (Read 2285 times)
Okay I just tried uninstalling all ati software and reinstalling again with 11-4 and 2.1 and wen I try and run GUIMiner it wont start
It just says AMD Accelerated Parallel Processing at the bottom
Mik
It just says AMD Accelerated Parallel Processing at the bottom
Mik
Okay that 11-4 driver and 2.1k thing gets me the same Mhash/s
Also, what flags should I use when I leave my rig Mining overnight?
Thanks for the help so far
Also, what flags should I use when I leave my rig Mining overnight?
Thanks for the help so far
Dam, another 100mb+ download
Will let you know once ive downloaded and installed
Thanks
Mik
Will let you know once ive downloaded and installed
Thanks
Mik
1. Uninstall ALL ATI Drivers.
2. Install Catalyst 11.4
3. Install ATI Stream SDK 2.1
4. Profit.
2. Install Catalyst 11.4
3. Install ATI Stream SDK 2.1
4. Profit.
Hey Guys,
Thanks for the help
I am now running at 1000/165 @ 1.35 volts (yes I figured out to down clock mem). My temps are on 80C and at night the fan speed is audible but during the day it goes to like 50% but im not home so I dont care
I am getting a water block for my card in 2 weeks time so looking forward to that
Any way @ 1000/165 @ 1.35 volts I am getting 420Mhash/s and using the 2.4 SDK drivers
How do you guys get 450MHash/s with only 40mhz more core clock than me?
And yes, I tried putting my ram to 300 and no I dont get any higher
Thanks a mil guys
Mik
Thanks for the help
I am now running at 1000/165 @ 1.35 volts (yes I figured out to down clock mem
). My temps are on 80C and at night the fan speed is audible but during the day it goes to like 50% but im not home so I dont care I am getting a water block for my card in 2 weeks time so looking forward to that
Any way @ 1000/165 @ 1.35 volts I am getting 420Mhash/s and using the 2.4 SDK drivers
How do you guys get 450MHash/s with only 40mhz more core clock than me?
And yes, I tried putting my ram to 300 and no I dont get any higher
Thanks a mil guys
Mik
Bringing down that mem clock can give a little headroom, maybe and extra 10 MHz out of the core, but well worth it.
Don't worry about down clocking your Memory Speed too much. It doesn't increase hash speed directly. What it does is it gives a little bit more overhead since Mining doesn't actually require high speed memory. But if you want to push every bit out of your card you might be able to do it by:
1) Modifying MSI Afterburner config file (google it)
2) Modify and flash your bios to allow lower bound clock speeds (google it also)
1) Modifying MSI Afterburner config file (google it)
2) Modify and flash your bios to allow lower bound clock speeds (google it also)
I'm using -v -w 128 -f 1, sometimes -v -w 192 -f 1, haven't seen much difference. I'm getting 435-450 avg, but that's also with Ati Stream SDK 2.1 (huge upgrade) and an oc of 1040 Core, 300 Mem, and 1.22 V.
Hi All,
I recently got into this GPU mining thing and want to know how I set my memory clock to 300 like all the other guys do on here?
I am getting about 405MHash/s with - v -w 128 -f 0
Thanks in advance
Mikrouwel
I recently got into this GPU mining thing and want to know how I set my memory clock to 300 like all the other guys do on here?
I am getting about 405MHash/s with - v -w 128 -f 0
Thanks in advance
Mikrouwel
Jump to: