Author

Topic: Motherboard and RAM for 10 x r9 280x (Read 1417 times)

hero member
Activity: 966
Merit: 501
January 20, 2014, 08:37:04 AM
#7
Question about ram: is 4gb enough? Let's say for 2X 280x videocards?
newbie
Activity: 13
Merit: 0
January 20, 2014, 08:27:40 AM
#6
thanks to all for replies.

What if i can check videocard before buying? For example start miner on each of XFX board. It is safe to buy it if hashrate will be ok?
legendary
Activity: 952
Merit: 1000
January 19, 2014, 12:39:37 PM
#5
Gigabyte 970A-D3P - works with 5 cards, and is $85.

AMD Sempron 145 - Cheap, works, and is $45.

Two 800W PSUs. make sure they're a good brand, strong single rail, with enough PCIe connectors, and 80Plus Gold. I'd check out the Rosewill 800W Lightning.

You could go with 2x4GB, but we actually found that a single 8GB stick was cheaper, and works the same. Shop around tho, and whatever's cheapest for you, that's the one to buy!
legendary
Activity: 854
Merit: 1000
January 19, 2014, 11:51:40 AM
#4
Asus tends to be overpriced sometimes.  

Gigabyte 79xx cards had VRM flame-out issues, so i am not sure if that's still a "feature" of the 280x variations.

Powercolor i have heard of general QA issues, like the XFX boards.



My personal vote would go to MSI!
newbie
Activity: 13
Merit: 0
January 19, 2014, 07:01:39 AM
#3
thx for advice.
Which brand is better for videocard?
Asus, GIGABYTE, Sapphire, MSI, PowerColor ?
sr. member
Activity: 840
Merit: 255
SportsIcon - Connect With Your Sports Heroes
January 19, 2014, 06:54:21 AM
#2
XFX tends to cheap out on vram speed. You risk low hashrate with that brand of videocards, even with modded bios or force-flashed from other brand.

PCI-e and system ram speed don't really matter. I suggest a Sempron 190 dual-core instead of the usual 145 single-core, for extra $5 or so.

I have an UD3 but I'm not sure how many cards it really supports at mining. In some motherboards, sometimes adjacent slots are disabled or otherwise aren't stable.

As PSU, See if an EVGA Supernova or Seasonic have 10 pci-e connectors, perhaps 1300w and above.

Crossfire is detrimental to coin mining.
newbie
Activity: 13
Merit: 0
January 19, 2014, 06:33:15 AM
#1
Hello to everyone. Want to mine litecoin and altcoins so need your advice.

We are planning to buy 10 videocards XFX Radeon R9 280X (per 5 in each motherboard). So we think about motherboard, ram and power.

Moherboard.
It is important how fast pci-e slots are in motherboard? For example "GIGABYTE GA-990FXA-UD5" have this:
2 slots x16
2 slots x4
1 slot x8

RAM.
Think about 2x4GB in each monerboard. It is important how fast memory working?

POWER SUPPLY.
Most difficult question. Which PSU need for 5 videocards? It is posssible to use 2 or 3 800watt PSU's  for each motherboard?

VIDEOCARDS.
Each card must be alone or it will be better to make crossfire?
Jump to: