Tracking received. Bars will be in stock next Tuesday, 25th of August.
Very good.
Please post photos once received so we can see before you ship.
Thanks.
Topic: moved - please delete (Read 2059 times)
Very good.
Please post photos once received so we can see before you ship.
Thanks.
I have decided against the velvet boxes and am leaning strongly towards loading the bars. If I load the bars, I will be loading all of them and not providing an additional hologram so as to make sure there is no confusion for reselling down the line.
How many ETH would you like to see loaded?
1
5
10
How many ETH would you like to see loaded?
1
5
10
I vote 1 ETH, BUT make it optional. Only loaded if asked by customer.
Can I propose a hypothetical to you minerjones?
Say you purchase 1 loaded and 1 unloaded bar. How will you prove down the line at a point of resale which one was purchased loaded and which was purchased unloaded?
Keep in mind the bars and holograms will not have the public address printed on them so that presents an obstacle with regard to validating their 'load' unless all were sold preloaded, correct?
For this reason I am thinking the selling of loaded pieces should be an all or none proposition but I am open for alternative solutions here.
Being that, I would say do not load the bars. and leave as a DIY bar.
I do not want any confusion/questions in the future of the validity of an address/balance.
So yes, I change my vote to a DIY bar, no Ether
...and that's my 2 satoshi
I have decided against the velvet boxes and am leaning strongly towards loading the bars. If I load the bars, I will be loading all of them and not providing an additional hologram so as to make sure there is no confusion for reselling down the line.
How many ETH would you like to see loaded?
1
5
10
How many ETH would you like to see loaded?
1
5
10
I vote 1 ETH, BUT make it optional. Only loaded if asked by customer.
Tracking received. Bars will be in stock next Tuesday, 25th of August.
I have decided against the velvet boxes and am leaning strongly towards loading the bars. If I load the bars, I will be loading all of them and not providing an additional hologram so as to make sure there is no confusion for reselling down the line.
How many ETH would you like to see loaded?
1
5
10
How many ETH would you like to see loaded?
1
5
10
I vote 1 ETH, BUT make it optional. Only loaded if asked by customer.
Can I propose a hypothetical to you minerjones?
Say you purchase 1 loaded and 1 unloaded bar. How will you prove down the line at a point of resale which one was purchased loaded and which was purchased unloaded?
Keep in mind the bars and holograms will not have the public address printed on them so that presents an obstacle with regard to validating their 'load' unless all were sold preloaded, correct?
For this reason I am thinking the selling of loaded pieces should be an all or none proposition but I am open for alternative solutions here.
I have decided against the velvet boxes and am leaning strongly towards loading the bars. If I load the bars, I will be loading all of them and not providing an additional hologram so as to make sure there is no confusion for reselling down the line.
How many ETH would you like to see loaded?
1
5
10
How many ETH would you like to see loaded?
1
5
10
If these bars fit the F*D bars, you may want to offer these as an optional purchase. I would personally buy 1 for this bar, and 1-2 for the F*D bars.
I vote for 1 ETH
I have decided against the velvet boxes and am leaning strongly towards loading the bars. If I load the bars, I will be loading all of them and not providing an additional hologram so as to make sure there is no confusion for reselling down the line.
How many ETH would you like to see loaded?
1
5
10
How many ETH would you like to see loaded?
1
5
10
Ether price looking really good! Couple of questions for those who have ordered...
1. I can have velvet boxes made for each bar but would add an incremental expense of $5-$7 each. Curious on feedback here, I would like to keep the price point down but these certainly would look better in a nice case...
2. Thinking of assembling each bar with 1 ETH inserted behind the hologram. There is no address window so there would be an element of trust instilled (which I know is hard with me being a new provider). But it would just be 1 ETH which at present is a couple of dollars so maybe worth the risk?
Appreciate feedback.
1. I can have velvet boxes made for each bar but would add an incremental expense of $5-$7 each. Curious on feedback here, I would like to keep the price point down but these certainly would look better in a nice case...
2. Thinking of assembling each bar with 1 ETH inserted behind the hologram. There is no address window so there would be an element of trust instilled (which I know is hard with me being a new provider). But it would just be 1 ETH which at present is a couple of dollars so maybe worth the risk?
Appreciate feedback.
You could offer the box as an optional add-on for those who don't want to pay. Many people are price conscious.
Most people will likely ask to assemble it themselves, due to trust issues. You could also offer it as a optional surcharge as well. Some crypto makers offer both DIY and Assembled options. As a collector, I'd prefer it be assembled with a nominal ETH loaded.
Ether price looking really good! Couple of questions for those who have ordered...
1. I can have velvet boxes made for each bar but would add an incremental expense of $5-$7 each. Curious on feedback here, I would like to keep the price point down but these certainly would look better in a nice case...
2. Thinking of assembling each bar with 1 ETH inserted behind the hologram. There is no address window so there would be an element of trust instilled (which I know is hard with me being a new provider). But it would just be 1 ETH which at present is a couple of dollars so maybe worth the risk?
Appreciate feedback.
1. I can have velvet boxes made for each bar but would add an incremental expense of $5-$7 each. Curious on feedback here, I would like to keep the price point down but these certainly would look better in a nice case...
2. Thinking of assembling each bar with 1 ETH inserted behind the hologram. There is no address window so there would be an element of trust instilled (which I know is hard with me being a new provider). But it would just be 1 ETH which at present is a couple of dollars so maybe worth the risk?
Appreciate feedback.
Holograms arrived today
I would like #100
I'll take a 9 pack (3 sets)
#13, #25, and #75 if available please.
Thank you
#13, #25, and #75 if available please.
Thank you
reservation confirmed
Dont understand the hologram portion. If there is no window for the first bits to be seen and the address isnt engraved how are you supposed to load it? Maybe its not meant to be loaded, can you let me know, thanks
You would use your own address and just print out and hide your private key behind the hologram. More of a personal wallet/safe.
Sign me up for 3.
Edit; Count me Out. I'm not in the states. I'm above the states.
Edit; Count me Out. I'm not in the states. I'm above the states.
Canada is fine.
This one looks much better compared to the defcon23 scam-bar.
At least this one do not have any false .999 metal purity lies.
And there is acutally a place for the holo.
I hope you will get some good sales, remember to use escrow. Good luck.
At least this one do not have any false .999 metal purity lies.
And there is acutally a place for the holo.
I hope you will get some good sales, remember to use escrow. Good luck.
Dont understand the hologram portion. If there is no window for the first bits to be seen and the address isnt engraved how are you supposed to load it? Maybe its not meant to be loaded, can you let me know, thanks
Sign me up for 3.
Edit; Count me Out. I'm not in the states. I'm above the states.
Edit; Count me Out. I'm not in the states. I'm above the states.
Ok. Kindly reserve a set of 3 for me with the lowest serial number avail. I may use escrow then. I'm in the U.S.
Thanks
Thanks
Set 11 of 100 reserved for you.
Ok. Kindly reserve a set of 3 for me with the lowest serial number avail. I may use escrow then. I'm in the U.S.
Thanks
Thanks
It seems very "interesting" how close these bars are to the F*D bars in size, shape and design.
Do you accept escrow since you are doing preorders from a new account?
Do you accept escrow since you are doing preorders from a new account?
Not accepting payment at this time, just reservations. Payment can be made when inventory is ready for shipping in 3 weeks. Escrow can be used at that time at the expense of the buyer.
Quote
Thanks again, may I ask who is the manufacturer of the bars you are selling?
Sorry, I cannot disclose the manufacturer.
It seems very "interesting" how close these bars are to the F*D bars in size, shape and design.
Do you accept escrow since you are doing preorders from a new account?
Do you accept escrow since you are doing preorders from a new account?
Are these endorsed by f*D/made in collaboration with?
No
Thanks, are they produced by the same manufacturer?
I couldn't tell you.
Thanks again, may I ask who is the manufacturer of the bars you are selling?
Are these endorsed by f*D/made in collaboration with?
No
Thanks, are they produced by the same manufacturer?
I couldn't tell you.
Are these endorsed by f*D/made in collaboration with?
No
Thanks, are they produced by the same manufacturer?
Are these endorsed by f*D/made in collaboration with?
No
I like the concept of more bars for sure, but I do not really care for the coin they represent. Good luck with sales - yes selling singles or packs of 3 will probably help sales a lot.
Added a 3 pack option. Thank you for the feedback.
I like the concept of more bars for sure, but I do not really care for the coin they represent. Good luck with sales - yes selling singles or packs of 3 will probably help sales a lot.
A COUPLE QUESTIONS
1. What are the bars made of/composed of?? Copper / brass alloy
2. Is the gold/silver plated?? If not, how do the bars obtain the gold/silver/copper color?? Will have to get info from mint regarding this question
3. How heavy are the bars?? 192 grams
4. What size are the bars?? 5" from corner to corner
5. Do they come with holders?? No
6. How will they be shipped?? (In bags/loose/tissue paper....etc) Individually wrapped with foam paper and boxed with bubble wrap/foam
7. Is there a discount for volume orders?? Open for discussion
Thanks.
And IMO, I think a pack of 3 and not 9 would help sell them.
I will keep this in mind but prefer to sell in bulk
1. What are the bars made of/composed of?? Copper / brass alloy
2. Is the gold/silver plated?? If not, how do the bars obtain the gold/silver/copper color?? Will have to get info from mint regarding this question
3. How heavy are the bars?? 192 grams
4. What size are the bars?? 5" from corner to corner
5. Do they come with holders?? No
6. How will they be shipped?? (In bags/loose/tissue paper....etc) Individually wrapped with foam paper and boxed with bubble wrap/foam
7. Is there a discount for volume orders?? Open for discussion
Thanks.
And IMO, I think a pack of 3 and not 9 would help sell them.
I will keep this in mind but prefer to sell in bulk
Are these endorsed by f*D/made in collaboration with?
The front has a very similar design to that of f*D... 
It is a nice design
The front has a very similar design to that of f*D...
moved
Jump to: