try setting them to gen2 and no more than X4
Topic: MSI B360-A Pro motherboard (Read 118 times)
Bios version: E7B22IMS.2CO
Bios built date : 10/14/2020
Bios mode: CSM
Settings/advanced/pcie-pci subsystem settings
Peg0 - Max Link speed : auto
PCI Latency timer : 32 pci auto...
Above 4g memory/cryrto currency mining : enabled
Pch gen switch : auto
Bios built date : 10/14/2020
Bios mode: CSM
Settings/advanced/pcie-pci subsystem settings
Peg0 - Max Link speed : auto
PCI Latency timer : 32 pci auto...
Above 4g memory/cryrto currency mining : enabled
Pch gen switch : auto
How are the cards installed? I looked through manual and dont see any way to control the two long slots to be x4 instead of primary x16. Wondering if you go all risers and use onboard video does it not see the 5th card? and also try on all riser with onboard off and video off card cabled to e1 (primary slot)?
Then just make sure you have VDT disabled, any m.2 not used should be disabled. Try turning off everything not needed (audio/cpu low power states/virtualization etc). Fast boot diasbled. Windows or Linux?
Also i assume you have tested all cards and work with risers just not with 5th installed. And confirm it boots with 5 cards but only sees 4...or refuses to boot with 5.
Many questions
Board should do it...manual even references crypto mining in 4g section with more than 4 gpus.
Then just make sure you have VDT disabled, any m.2 not used should be disabled. Try turning off everything not needed (audio/cpu low power states/virtualization etc). Fast boot diasbled. Windows or Linux?
Also i assume you have tested all cards and work with risers just not with 5th installed. And confirm it boots with 5 cards but only sees 4...or refuses to boot with 5.
Many questions
Board should do it...manual even references crypto mining in 4g section with more than 4 gpus.
im %100 sure to 4g mode enable..
in bios make sure above 4G is enabled.
Hey guys
I have Msi b360-a pro motherbord for mining. I have 5x rx 6800 xt 16gb gpu but i couldnt add to one of gpu.
I updated to last bios version and opened to mining mode and 4g cyrpto currency but i cant add to 5. Gpu.
4 gpu working well but 5 or more system not accepting to gpu. I changed to slots, risers cables and everything but still same.
If someone know any solution for this problem, please help me
Thanks for understanding
I have Msi b360-a pro motherbord for mining. I have 5x rx 6800 xt 16gb gpu but i couldnt add to one of gpu.
I updated to last bios version and opened to mining mode and 4g cyrpto currency but i cant add to 5. Gpu.
4 gpu working well but 5 or more system not accepting to gpu. I changed to slots, risers cables and everything but still same.
If someone know any solution for this problem, please help me
Thanks for understanding
Jump to: