radmin works as well
but keep in mind radmin and logmein will lower your hash rate by a small bit from 515hash to like 512hash
I beleave this is becos when you use windows remote desktop it logs you out and puts your monitor back to the login screen on the pc it self thus not useing the gfx card as much but when you login with logmein or radmin it simulates that your at your pc and logs you in so if the monitor was terned on you would see your self useing that pc but with windows remote desktop it uses the gfx card on the pc you are on not the one your remoteing in to
Topic: MSI Radeon 7970 - Can't see Temp or control FAN Speeds? (Read 2901 times)
I figured it out!!
I would never thought that RDP'ing into that machine would cause such a mess. in order to configure and easy access i setup remote desktop connection, but once i connect i cant control gpu or fan anymore. hope that helps soomeone!
i installed logmein and now access it this way.
I would never thought that RDP'ing into that machine would cause such a mess. in order to configure and easy access i setup remote desktop connection, but once i connect i cant control gpu or fan anymore. hope that helps soomeone!
i installed logmein and now access it this way.
I see, the odd thing is that when i plug in my winxp OS drive it works, i can see temp, but i cant run miners because SDK is too new and doesnt work with winxp, do you know how to make cgminer work on winxp?
thanks
thanks
Sorry, I can't answer your problem specifically, but what program are you trying to mine with? CGMiner does a very good job of managing temps, fan speeds, overclocking settings, etc. And that is regardless of any other tools that may or may not be running. I HAVE found that some tools will battle each other, so having MSI AFterburner, the AMD tools, etc. disabled usually yields better results.
In post: https://bitcointalksearch.org/topic/why-do-my-7970s-only-get-675-mhs-171747 you will find the suggested, following setting for CGMiner in a 2-card setup that may work for you:
PS, forum member: crazyates gets the credit for this suggested config.
In post: https://bitcointalksearch.org/topic/why-do-my-7970s-only-get-675-mhs-171747 you will find the suggested, following setting for CGMiner in a 2-card setup that may work for you:
Quote
-I 7,7 --gpu-powertune 20 --auto-gpu --auto-fan --gpu-engine 800-1125 --gpu-fan 40-100 --temp-target 70 --temp-overheat 82 --gpu-memdiff -150
PS, forum member: crazyates gets the credit for this suggested config.
Hi,
I recently got 2x MSI Radeon 7970. One is running on pretty new PC, which has no problem i can control fan and see temp. However my second card is on i cant see temp or control the GPU Fan speed.
This is the mobo i have: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=719&MenuID=1&LanID=0
Note - I had to remove batter from MOBO because the card wouldn't fit.
I have 2 programs downloaded and this is what i see when i open them:
It mines no problem i get 550mhz, but im worried that the card will fry if it will go to hot. right now temp is 78-80C i want it to be 65-70, and I know i can do that with fan control.
What could be the issue? why i cant control FAN?
I tried rebooting - didnt help.
Thanks
I recently got 2x MSI Radeon 7970. One is running on pretty new PC, which has no problem i can control fan and see temp. However my second card is on i cant see temp or control the GPU Fan speed.
This is the mobo i have: http://www.ecs.com.tw/ECSWebSite/Product/Product_Detail.aspx?DetailID=719&MenuID=1&LanID=0
Note - I had to remove batter from MOBO because the card wouldn't fit.
I have 2 programs downloaded and this is what i see when i open them:
It mines no problem i get 550mhz, but im worried that the card will fry if it will go to hot. right now temp is 78-80C i want it to be 65-70, and I know i can do that with fan control.
What could be the issue? why i cant control FAN?
I tried rebooting - didnt help.
Thanks
Jump to: