Multi Rig Build Checklist and Software Inquiry for RX580/GTX1060

What's going on miners..

So over the past week I've spent a plethora of time researching, reading, planning..watching..praying...

I ended up with a multi rig set up I'm assembling myself consisting of:

Rig 1 and 2:
6 x MSI Rx 580 8Gb GPU's
ASRock H97 Anniversary LGA 1150 motherboard
Kingston HyperX Fury 8gb RAM
Intel Celeron G1840 Processor
San Disk SSD 120GB
Parralel Miners Open Air 6.1 Case w/ USB Risers
1200W Platinum power supply

My 3rd rig is the same exact build but I swapped the Rx580's out for the Nvidia Geforce GTX 1060's..(ZEC purposes)

Back on point, on Friday I'm adding a 20 Amp breaker switch to my current breaker box, and on that circuit i'll run 3 outlets of 240V for the PSU's.. I did the math and I am still within the thresh hold of allocated energy needed..

Things like fans and physical setup I'm not so much worried about.. but the SOFTWARE for multi-rig mining.
I understand Ethos for example will only work with AMD cards...so I have 2 questions for you all.

1. Am I covering all of my bases moving forward with my setup?..
2. What SOFTWARE and OS combo would you all recommend putting on these SSD's?

Thanks ahead, big ups to any and all responses, very much appreciated.. Could go for a nap about now.
Cheers

Topic: Multi Rig Build Checklist and Software Inquiry for RX580/GTX1060 (Read 412 times)