Topic: Multiple GPU Configuration (Read 434 times)
Plug your monitor into the video card that's plugged into the first x16 PCIe port (the port where you would normally put your GPU). Don't use onboard graphics.
is this the carbon mobo. have you updated the bios version. i followed this guide for my miner, maybe update the bios
https://forum.z.cash/t/msi-z170-7-gpu-bios-setting-step-by-step/14473
be careful though.
https://forum.z.cash/t/msi-z170-7-gpu-bios-setting-step-by-step/14473
be careful though.
Any Ideas? No one has had this issue before?
worth a try.
i had a similar issue so plugged monitor into one of the gpus connected via the risers not mobo. weird thing was a few worked some didn't, never worked out as one displayed monitor.
Yeah i tried this as well and the monitor didn't work either? I didn't try all of them but the one i did try i didn't have a display. Ill try the other 3 maybe tonight and see if that makes a difference. I mean if i can get ANY of them to work so i can see whats going on and start mining that's fine with me. As long as all 4 cards are recognized by the system...lol
i had a similar issue so plugged monitor into one of the gpus connected via the risers not mobo. weird thing was a few worked some didn't, never worked out as one displayed monitor.
Ok so i set up a new rig and am running into an issue where the monitor wont work when the 4 cards are plugged into the mobo with risers.
First I am using the following:
Motherboard: MSI Z170A M5
Graphic Cards: 3 - Gigabyte Radeon RX 460's - 4gb
Graphic Cards: 1 - xfx Radeon RX 460's - 4gb
PSU: EVGA 650 PS2
Risers: Version 6
So i set everything up, mounted the cards on top, connected the risers to the graphics cards, ran the USB cable with the connector to each of the PCIE slots, plugged the monitor into the HDMI port in the mobo turned on the PC and everything starts up but the monitor.
So i unplugged a couple of the video cards, still no monitor.
Unplugged ALL of the riser connectors in the PCIE slots turned on the PC and i have a monitor?
The other test i did was plug one of the graphic cards directly into a PCIE slot plugged the monitor into that and it worked, BUT as soon as plugged the other 3 risers into the PCIE slots i have no monitor?
Any ideas why this would be happening?
First I am using the following:
Motherboard: MSI Z170A M5
Graphic Cards: 3 - Gigabyte Radeon RX 460's - 4gb
Graphic Cards: 1 - xfx Radeon RX 460's - 4gb
PSU: EVGA 650 PS2
Risers: Version 6
So i set everything up, mounted the cards on top, connected the risers to the graphics cards, ran the USB cable with the connector to each of the PCIE slots, plugged the monitor into the HDMI port in the mobo turned on the PC and everything starts up but the monitor.
So i unplugged a couple of the video cards, still no monitor.
Unplugged ALL of the riser connectors in the PCIE slots turned on the PC and i have a monitor?
The other test i did was plug one of the graphic cards directly into a PCIE slot plugged the monitor into that and it worked, BUT as soon as plugged the other 3 risers into the PCIE slots i have no monitor?
Any ideas why this would be happening?
Jump to: