Topic: Multipool is requesting a lot of work restart (Read 550 times)
Divide your Kh/s by 10 and set that as your difficulty. Works just fine for me. Difficulty is always relevant.
Those are three pools I have used, but there are certainly gazillions of other reliable scrypt pools out there:
Also make sure to check the Pool section in the altcoin board.
Also make sure to check the Pool section in the altcoin board.
Do you know some good vardiff pools to share?
The diff you are mining at (256) is way too high for your hashrate (~270kh/s), there will be new work before you are able to submit a share most of the time.
I have a small USB miner with about the same scrypt hashrate and it mines at a diff of 8 on a multipool vardiff port. I would recommend with that hashrate to not mine with a difficulty over 32.
HTH
I have a small USB miner with about the same scrypt hashrate and it mines at a diff of 8 on a multipool vardiff port. I would recommend with that hashrate to not mine with a difficulty over 32.
HTH
I have a Gigabyte R9 290x and I started to mine some LTC from Multipool, but it's requesting a lot of work restart and accepting just a little, someone knows why is this happening?
http://puu.sh/kaVcx/a7b1f3c56c.png
http://puu.sh/kaVcx/a7b1f3c56c.png
Jump to: