Topic: My 5830 x 2 rig is only pulling about 260 OCed Help!! (Read 1389 times)
Sounds to me like only 1 of your GPUs is running... Are you using DEVICE=0 & DEVICE=1 in separate instances of your miner?
If he is using a previous version of guiminer(also not sure of how it works in current one) wouldn't he need to make a new miner (tab) for each gpu?
Which miner and which (if any) flags are you using?
https://en.bitcoin.it/wiki/Mining_hardware_comparison
I hope you didn't mean '400ish' but rather '300ish' on each GPU.
400 Mhash/s can be achieved on 5850 @ 960-1000Mhz
https://en.bitcoin.it/wiki/Mining_hardware_comparison
I hope you didn't mean '400ish' but rather '300ish' on each GPU.
400 Mhash/s can be achieved on 5850 @ 960-1000Mhz
Have you installed the July 1st update from GUI miner? They made some significant changes, and people are getting ~10MH/s and higher speed increases.
sadf
Wow!!! thanks! Thats a lot to do ill post again when i get it all done. Im gonna play a game of disc golf then its geek time. Really appreciate that. Idk how ppl know so much about this. Like who figured it out first.
Thanks again.
Thanks again.
Download MSI Afterburner
Install it
Browse to the installed folder for MSI Afterburner
Find the file called "MSIAfterburner.cfg"
Edit it using Notepad
Search for this in the file:
[ATIADLHAL]
EnableUnofficialOverclocking = ?
UnofficialOverclockingEULA = ?
UnofficialOverclockingMode = ?
Make the [ATIADLHAL] section look like this:
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0
Save the file
Open Afterburner
Click on "Settings" button
Select the "Synchronize settings for similar graphics processors" (make sure it's checked if you have two of the same cards)
Click OK
Reduce the memory to 600 MHz (some cards may be different at this stage like maybe 700 Mhz; you have to find stable point)
Click Apply
Close AfterBurner
Open AfterBurner
Reduce the memory to 350 MHz
Click Apply
Close AfterBurner
Open After Burner
Reduce the memory to 300 Mhz
Increase the CPU speed to 980 Mhz
Click Apply
Run your miners.
My 5830 Miners are doing 310 MH/s each.
If you need more help on setting up the miners let me know.
Install it
Browse to the installed folder for MSI Afterburner
Find the file called "MSIAfterburner.cfg"
Edit it using Notepad
Search for this in the file:
[ATIADLHAL]
EnableUnofficialOverclocking = ?
UnofficialOverclockingEULA = ?
UnofficialOverclockingMode = ?
Make the [ATIADLHAL] section look like this:
[ATIADLHAL]
EnableUnofficialOverclocking = 1
UnofficialOverclockingEULA = I confirm that I am aware of unofficial overclocking limitations and fully understand that MSI will not provide me any support on it
UnofficialOverclockingMode = 2
AccessibilityCheckingPeriod = 0
Save the file
Open Afterburner
Click on "Settings" button
Select the "Synchronize settings for similar graphics processors" (make sure it's checked if you have two of the same cards)
Click OK
Reduce the memory to 600 MHz (some cards may be different at this stage like maybe 700 Mhz; you have to find stable point)
Click Apply
Close AfterBurner
Open AfterBurner
Reduce the memory to 350 MHz
Click Apply
Close AfterBurner
Open After Burner
Reduce the memory to 300 Mhz
Increase the CPU speed to 980 Mhz
Click Apply
Run your miners.
My 5830 Miners are doing 310 MH/s each.
If you need more help on setting up the miners let me know.
you should down clock the memory to 300 and see what happens. 300 is the standard for the 5830.
Im running GUIMiner and i just added another card and it brought my hash rate to about 255-260 from about 220. I feel like the second card should be working better than that. They currently aren't crossfired i am running them with a second monitor. Hot do i see the 400ish that i should get from these 2 cards? I am also overclocking them to 875 and downclocking the memory to 900. I havent flashed the BIOS of either card. (cuz i dont know how and dont trust myself to do it right) How do i optimize the performance of this rig?
Jump to: