when it quit the only led that work is the red one right?
i had those gridseed in the past and they were a bit a pain in the ass, because sometime they randomly stopped workin g for no reason and you need to remove all cable and reconnect everything for hoping for their restart
i had those gridseed in the past and they were a bit a pain in the ass, because sometime they randomly stopped workin g for no reason and you need to remove all cable and reconnect everything for hoping for their restart
No LEDs work and the pc does not see it. I seen it was a reset button on the board and I pressed it for about 15 seconds and it still don't work. Did it burn up?
Thanks for replying!
this is strange, if both leds are working it should hash regularly
resetting it should only bring the setting to default and nothing else, the fan is still there right? because maybe you did used it without the fan and in sha256 mode for distraction...
No LEDs work! And it has a fan (OEM) on it the hole time i had it, and the fan works perfectly. And i was mining in sha256.
ah sry i did not understand, then if no led work it is probably gone for good, it could be caused by the excessive usage under heavy oc, there was probably a voltage modification on it
you didn't already, you might try to remove every cable retarst your pc(or the machien you are using to run this asic) and reconnect everything
I thought it was gone.
Thanks for your help!
