Topic: My Setup ASICMINER block erupter (Read 472 times)
I was thinking of using the 4 pin connector that has two yellow 12v and two black wires. Any opinions on that? it looks like http://thumbs1.ebaystatic.com/d/l225/m/mQdSrTmQnBFtqPKup47K4Yw.jpg
Hello:
I am trying to do my first ASICMINER block erupter blade 10ghash using stratus proxy. Everything seems to be going OK with connection to hash etc. The problem I have is my blade reboots every 2 minutes. I used the single yellow wire and a single black from a molex connector from a 500w fairly new power supply. Tech support said to try another power supply. I know some have recommended against the single wire set up, and use a splitter. I am not sure what the splitter does because the upstream wire is a single wire anyway. I am still in experimental mode, using 2 regular 120mm fans on the heatsink. Any feedback or help would be great. In the mean time I will try another power supply as tech support suggests.
Thanks!
I am trying to do my first ASICMINER block erupter blade 10ghash using stratus proxy. Everything seems to be going OK with connection to hash etc. The problem I have is my blade reboots every 2 minutes. I used the single yellow wire and a single black from a molex connector from a 500w fairly new power supply. Tech support said to try another power supply. I know some have recommended against the single wire set up, and use a splitter. I am not sure what the splitter does because the upstream wire is a single wire anyway. I am still in experimental mode, using 2 regular 120mm fans on the heatsink. Any feedback or help would be great. In the mean time I will try another power supply as tech support suggests.
Thanks!
Jump to: