Code:
"txid": "828bc6179345284921e70d393efe14cb42e0f9413752b126fb031a8f5a9c29ff",
"hash": "9c6e3b45d40c4740180e16412e2d1861a1f94085f697ce42b7ffcbdd8086ec5a",
I'm starting it over again and try to debug it. I'll share any results ASAP.
Topic: My transactions get stuck in memory pool !!! (Read 473 times)
I've been recently coming back to this old problem. One thing that I noticed was that txid and hash were different in unsuccessful transactions (decoded) but in all successful transactions they were the same(no matter what address type). What could be the reason that in transactions which use segwit addresses, all even numbered transactions aren't validated(1,3,5,... transactions are OK)?
I'm starting it over again and try to debug it. I'll share any results ASAP.
I'm starting it over again and try to debug it. I'll share any results ASAP.
Quote
Indeed.. Can you post a getrawtransaction decoded so we can check if this is the locktime again (if this is still the same function which returns false) ?
Yes,
Code:
getrawtransaction 828bc6179345284921e70d393efe14cb42e0f9413752b126fb031a8f5a9c29ff 1
{
"txid": "828bc6179345284921e70d393efe14cb42e0f9413752b126fb031a8f5a9c29ff",
"hash": "9c6e3b45d40c4740180e16412e2d1861a1f94085f697ce42b7ffcbdd8086ec5a",
"version": 2,
"size": 247,
"vsize": 166,
"weight": 661,
"locktime": 12,
"vin": [
{
"txid": "2ca69f469e0b461c546e151441ba8537ef4a00615f9ae87ce5c97b72f7a76114",
"vout": 0,
"scriptSig": {
"asm": "00147ff93bf12b29683c2c918f890f98cd19eb2c23b2",
"hex": "1600147ff93bf12b29683c2c918f890f98cd19eb2c23b2"
},
"txinwitness": [
"30440220629eb58313c3d6e95c7e22d5d130cb55e6ec7e288bfefdaf8ef4d7be5e908626022065805fbcd3dbb2cb859cb83f9164d3e39f929025c847546dd0552d595a641c6801",
"038259d51458e3063ed5b9dc1fb8030fc6371cef44c674cf44e8ca2127f4110902"
],
"sequence": 4294967293
}
],
"vout": [
{
"value": 45.99894100,
"n": 0,
"scriptPubKey": {
"asm": "OP_HASH160 c0daf191bc75d4bd94b87590762005081b9ab71a OP_EQUAL",
"hex": "a914c0daf191bc75d4bd94b87590762005081b9ab71a87",
"reqSigs": 1,
"type": "scripthash",
"addresses": [
"3KGjwqyqo6nnvzAcTCyAVTgdKJ3DwyPTXF"
]
}
},
{
"value": 2.00000000,
"n": 1,
"scriptPubKey": {
"asm": "OP_HASH160 37fdd042f4dfad0e52fa932291a1cfafa7704892 OP_EQUAL",
"hex": "a91437fdd042f4dfad0e52fa932291a1cfafa770489287",
"reqSigs": 1,
"type": "scripthash",
"addresses": [
"36o59NF7NbtWoLrAXBBtcGTSQ6wTiVRthV"
]
}
}
],
"hex": "020000000001011461a7f7727bc9e57ce89a5f61004aef3785ba4114156e541c460b9e469fa62c00000000171600147ff93bf12b29683c2c918f890f98cd19eb2c23b2fdffffff0254d02c120100000017a914c0daf191bc75d4bd94b87590762005081b9ab71a8700c2eb0b0000000017a91437fdd042f4dfad0e52fa932291a1cfafa770489287024730440220629eb58313c3d6e95c7e22d5d130cb55e6ec7e288bfefdaf8ef4d7be5e908626022065805fbcd3dbb2cb859cb83f9164d3e39f929025c847546dd0552d595a641c680121038259d51458e3063ed5b9dc1fb8030fc6371cef44c674cf44e8ca2127f41109020c000000"
}
The problem is still with sequence number which is fffffffd. {
"txid": "828bc6179345284921e70d393efe14cb42e0f9413752b126fb031a8f5a9c29ff",
"hash": "9c6e3b45d40c4740180e16412e2d1861a1f94085f697ce42b7ffcbdd8086ec5a",
"version": 2,
"size": 247,
"vsize": 166,
"weight": 661,
"locktime": 12,
"vin": [
{
"txid": "2ca69f469e0b461c546e151441ba8537ef4a00615f9ae87ce5c97b72f7a76114",
"vout": 0,
"scriptSig": {
"asm": "00147ff93bf12b29683c2c918f890f98cd19eb2c23b2",
"hex": "1600147ff93bf12b29683c2c918f890f98cd19eb2c23b2"
},
"txinwitness": [
"30440220629eb58313c3d6e95c7e22d5d130cb55e6ec7e288bfefdaf8ef4d7be5e908626022065805fbcd3dbb2cb859cb83f9164d3e39f929025c847546dd0552d595a641c6801",
"038259d51458e3063ed5b9dc1fb8030fc6371cef44c674cf44e8ca2127f4110902"
],
"sequence": 4294967293
}
],
"vout": [
{
"value": 45.99894100,
"n": 0,
"scriptPubKey": {
"asm": "OP_HASH160 c0daf191bc75d4bd94b87590762005081b9ab71a OP_EQUAL",
"hex": "a914c0daf191bc75d4bd94b87590762005081b9ab71a87",
"reqSigs": 1,
"type": "scripthash",
"addresses": [
"3KGjwqyqo6nnvzAcTCyAVTgdKJ3DwyPTXF"
]
}
},
{
"value": 2.00000000,
"n": 1,
"scriptPubKey": {
"asm": "OP_HASH160 37fdd042f4dfad0e52fa932291a1cfafa7704892 OP_EQUAL",
"hex": "a91437fdd042f4dfad0e52fa932291a1cfafa770489287",
"reqSigs": 1,
"type": "scripthash",
"addresses": [
"36o59NF7NbtWoLrAXBBtcGTSQ6wTiVRthV"
]
}
}
],
"hex": "020000000001011461a7f7727bc9e57ce89a5f61004aef3785ba4114156e541c460b9e469fa62c00000000171600147ff93bf12b29683c2c918f890f98cd19eb2c23b2fdffffff0254d02c120100000017a914c0daf191bc75d4bd94b87590762005081b9ab71a8700c2eb0b0000000017a91437fdd042f4dfad0e52fa932291a1cfafa770489287024730440220629eb58313c3d6e95c7e22d5d130cb55e6ec7e288bfefdaf8ef4d7be5e908626022065805fbcd3dbb2cb859cb83f9164d3e39f929025c847546dd0552d595a641c680121038259d51458e3063ed5b9dc1fb8030fc6371cef44c674cf44e8ca2127f41109020c000000"
}
Finally I got the answer!
As I previously said you can use legacy addresses but it is not a long term viable solution. You should fork 0.17+.Thank you for all the help. I truly appreciate it.
No problem 
But It's still ambiguous to me why segwit address would fail creating block....
Because Segwit was not activated yet so you could not add Segwit transactions in a block."segwit address would fail creating block" : this is not the address which creates a block, it is the software. Block generation is (almost) unrelated to addresses.
I forked 0.17.1 and applied all my changes again(segwit activated by default), still didn't work with segwit addresses. This is strange!
Finally I got the answer!
As I previously said you can use legacy addresses but it is not a long term viable solution. You should fork 0.17+.Thank you for all the help. I truly appreciate it.
No problem But It's still ambiguous to me why segwit address would fail creating block....
Because Segwit was not activated yet so you could not add Segwit transactions in a block."segwit address would fail creating block" : this is not the address which creates a block, it is the software. Block generation is (almost) unrelated to addresses.
I forked 0.17.1 and applied all my changes again(segwit activated by default), still didn't work with segwit addresses. This is strange!
Finally I got the answer!
As I previously said you can use legacy addresses but it is not a long term viable solution. You should fork 0.17+ or mine enough blocks to activate Segwit.Thank you for all the help. I truly appreciate it.
No problem But It's still ambiguous to me why segwit address would fail creating block....
Because Segwit was not activated yet so you could not (standardly) add Segwit transactions in a block.Regarding the terminology that an "address would fail to create a block" : this is not the address which creates a block, it is the software. Block generation is (almost) unrelated to addresses.
Quote
which version of bitcoin-core did you fork ?
First, thank you so much for the help. I forked 16.2 from branch master. I mined coinbase transactions till 12 blocks further also but didn't work. I try to use legacy addresses and let you know ASAP. Thanks again!Finally I got the answer! Thank you for all the help. I truly appreciate it.
But It's still ambiguous to me why segwit address would fail creating block....
Legacy start with 1 segwit starts with 3.
You should be able to launch the client with legacy addressing.
add this to your .conf file.
It should then launch with legacy addressing.
You should be able to launch the client with legacy addressing.
add this to your .conf file.
Code:
addresstype=legacy
It should then launch with legacy addressing.
Thank you so much!!!
Legacy start with 1 segwit starts with 3.
You should be able to launch the client with legacy addressing.
add this to your .conf file.
It should then launch with legacy addressing.
You should be able to launch the client with legacy addressing.
add this to your .conf file.
Code:
addresstype=legacy
It should then launch with legacy addressing.
Quote
which version of bitcoin-core did you fork ?
First, thank you so much for the help. I forked 16.2 from branch master. I mined coinbase transactions till 12 blocks further also but didn't work. I try to use legacy addresses and let you know ASAP. Thanks again!I did exactly as you said, forked from 0.17.1 . Same thing in the same place happened.
By legacy addresses do you mean the ones that starts with 3.. or 1... ? . Bitcoin core wallet doesn't generate the ones that start with 1... . Is there any online generators ? I searched and found nothing. Quote
which version of bitcoin-core did you fork ?
First, thank you so much for the help. I forked 16.2 from branch master. I mined coinbase transactions till 12 blocks further also but didn't work. I try to use legacy addresses and let you know ASAP. Thanks again!Quote
which version of bitcoin-core did you fork ?
First, thank you so much for the help. I forked 16.2 from branch master. I mined coinbase transactions till 12 blocks further also but didn't work. I try to use legacy addresses and let you know ASAP. Thanks again! What are peer magic values ? I don't know anything about them.
They are also called "magic bytes", these are bytes set that every message will start with so we can see that the data on the wire is a Bitcoin message. They are set to : Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9;
What is weird is that your nodes are connected, you can mine and blocks are transmitted. However when mining tx from the mempool are not added to the bloc the software is generating. I would recommend that you add some "LogPrintf()" in the mining code (which is located here) and then you do everything again, after having compiled. Then you would see informations about what is going on in "~/.bitcoin/debug.log". I don't have time to help you right now but I will if you haven't achieved it till then.
Thanks for the hint. I did as you said and found something! The problem rises when "TestPackageTransactions()" in miner.cpp returns false in this line : https://github.com/bitcoin/bitcoin/blob/c6806ee8694e9c864a29ef260c87b9fed77de84f/src/miner.cpp#L217
I tried to comment it so that it could accept my block but then "TestBlockValidity()" in validation.cpp threw an error in https://github.com/bitcoin/bitcoin/blob/c6806ee8694e9c864a29ef260c87b9fed77de84f/src/validation.cpp#L3594.
Then I tried to comment where this function was used. Then I got error in mining.cpp here : https://github.com/bitcoin/bitcoin/blob/master/src/rpc/mining.cpp#L144
If I comment this line as well I won't be able to mine anything and my balance doesn't not change.
It seems the network doesn't accept my block as a valid block. I wonder why,It may have something to do with witness but it's all ambiguous to me !!!!
Link to my project with logs and without commenting those functions mentioned above : https://github.com/chameleon1239/bitcoin.git
The most weird thing is that it works for first transaction, then doesn't work for the second one. Then it works for third one and so on.
Please if you find some time take a look at it. I'll appreciate it so much.
don't change validation rules.
Quote
// Perform transaction-level checks before adding to block:
// - transaction finality (locktime)
// - premature witness (in case segwit transactions are added to mempool before
// segwit activation)
bool BlockAssembler::TestPackageTransactions(const CTxMemPool::setEntries& package)
{
for (CTxMemPool::txiter it : package) {
if (!IsFinalTx(it->GetTx(), nHeight, nLockTimeCutoff))
return false;
if (!fIncludeWitness && it->GetTx().HasWitness())
return false;
}
return true;
}
So the function that fails returns false in two cases// - transaction finality (locktime)
// - premature witness (in case segwit transactions are added to mempool before
// segwit activation)
bool BlockAssembler::TestPackageTransactions(const CTxMemPool::setEntries& package)
{
for (CTxMemPool::txiter it : package) {
if (!IsFinalTx(it->GetTx(), nHeight, nLockTimeCutoff))
return false;
if (!fIncludeWitness && it->GetTx().HasWitness())
return false;
}
return true;
}
: when the locktime is not finished or when you send a segwit tx when segwit is not activated.
The locktime of your transaction is :
Code:
0c000000
Code:
'0xffffffff'
Code:
'0xfffffffd'
To have your raw transaction decoded use
Code:
getrawtransaction1
What are peer magic values ? I don't know anything about them.
They are also called "magic bytes", these are bytes set that every message will start with so we can see that the data on the wire is a Bitcoin message. They are set to : Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9;
What is weird is that your nodes are connected, you can mine and blocks are transmitted. However when mining tx from the mempool are not added to the bloc the software is generating. I would recommend that you add some "LogPrintf()" in the mining code (which is located here) and then you do everything again, after having compiled. Then you would see informations about what is going on in "~/.bitcoin/debug.log". I don't have time to help you right now but I will if you haven't achieved it till then.
Thanks for the hint. I did as you said and found something! The problem rises when "TestPackageTransactions()" in miner.cpp returns false in this line : https://github.com/bitcoin/bitcoin/blob/c6806ee8694e9c864a29ef260c87b9fed77de84f/src/miner.cpp#L217
I tried to comment it so that it could accept my block but then "TestBlockValidity()" in validation.cpp threw an error in https://github.com/bitcoin/bitcoin/blob/c6806ee8694e9c864a29ef260c87b9fed77de84f/src/validation.cpp#L3594.
Then I tried to comment where this function was used. Then I got error in mining.cpp here : https://github.com/bitcoin/bitcoin/blob/master/src/rpc/mining.cpp#L144
If I comment this line as well I won't be able to mine anything and my balance doesn't not change.
It seems the network doesn't accept my block as a valid block. I wonder why,It may have something to do with witness but it's all ambiguous to me !!!!
Link to my project with logs and without commenting those functions mentioned above : https://github.com/chameleon1239/bitcoin.git
The most weird thing is that it works for first transaction, then doesn't work for the second one. Then it works for third one and so on.
Please if you find some time take a look at it. I'll appreciate it so much.
What are peer magic values ? I don't know anything about them.
They are also called "magic bytes", these are bytes set that every message will start with so we can see that the data on the wire is a Bitcoin message. They are set to : Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9;
What is weird is that your nodes are connected, you can mine and blocks are transmitted. However when mining tx from the mempool are not added to the bloc the software is generating. I would recommend that you add some "LogPrintf()" in the mining code (which is located here) and then you do everything again, after having compiled. Then you would see informations about what is going on in "~/.bitcoin/debug.log". I don't have time to help you right now but I will if you haven't achieved it till then.
Thanks a lot for all the help. I will certainly do that and let you know.Do you think I can solve it in two days? I have a deadline by that time.
What are peer magic values ? I don't know anything about them.
They are also called "magic bytes", these are bytes set that every message will start with so we can see that the data on the wire is a Bitcoin message. They are set to : Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9;
What is weird is that your nodes are connected, you can mine and blocks are transmitted. However when mining tx from the mempool are not added to the bloc the software is generating. I would recommend that you add some "LogPrintf()" in the mining code (which is located here) and then you do everything again, after having compiled. Then you would see informations about what is going on in "~/.bitcoin/debug.log". I don't have time to help you right now but I will if you haven't achieved it till then.
Thanks a lot for all the help. I will certainly do that and let you know.Do you think I can solve it in two days? I have a deadline by that time.
You will want to change the values to random non common ascii in chainparams.cpp
Try this recompile and test again.
Code:
$ python
>>> import random
>>> hex(random.randint(127,255))
'0xd9'
Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9; <---- do all 4
Try this recompile and test again.
I already did that. I f you look at my code there are randome generated values for these parameters.
You will want to change the values to random non common ascii in chainparams.cpp
Try this recompile and test again.
Code:
$ python
>>> import random
>>> hex(random.randint(127,255))
'0xd9'
Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9; <---- do all 4
Try this recompile and test again.
What are peer magic values ? I don't know anything about them.
They are also called "magic bytes", these are bytes set that every message will start with so we can see that the data on the wire is a Bitcoin message. They are set to : Code:
pchMessageStart[0] = 0xf9;
pchMessageStart[1] = 0xbe;
pchMessageStart[2] = 0xb4;
pchMessageStart[3] = 0xd9;
What is weird is that your nodes are connected, you can mine and blocks are transmitted. However when mining tx from the mempool are not added to the bloc the software is generating. I would recommend that you add some "LogPrintf()" in the mining code (which is located here) and then you do everything again, after having compiled. Then you would see informations about what is going on in "~/.bitcoin/debug.log". I don't have time to help you right now but I will if you haven't achieved it till then.
Are you sure your transaction is in the mempool ? Try
Hi, yes. I'm pretty sure. I used the command(It works without 1) and I got that transaction ID. If you run it too, you can see it. Very strange!Code:
getrawmempool 1
I just changed some things according to https://bitcointalksearch.org/topic/m.35016844 guide.Created a new genesis block according to my new difficulty(nBits) which was 0x1f0fffff and powLimit in chainparams.cpp was changed to 0x000ffff...f .Also commented this line in mining.cpp :
Code:
if (IsInitialBlockDownload())
throw JSONRPCError(RPC_CLIENT_IN_INITIAL_DOWNLOAD, "Bitcoin is downloading blocks...");
Finally changed coinbase maturity to 10.
I guess you changed the peer magic values?
If your running in VM's on the same machine you may have firewall issues?
Post the outputs of the following in code tags from both consoles.
getmininginfo
getpeerinfo
getrawtransaction
Quote
I guess you changed the peer magic values?
What are peer magic values ? I don't know anything about them.Quote
If your running in VM's on the same machine you may have firewall issues?
As far as I know, No. I tested this scenario on another machine too but got same results.[/quote]
Post the outputs of the following in code tags from both consoles.
getmininginfo
getpeerinfo
getrawtransaction
[/quote]
For first node the out puts are :
getmininginfo
Code:
{
"blocks": 13,
"currentblockweight": 4000,
"currentblocktx": 0,
"difficulty": 1,
"networkhashps": 0.009866452320361751,
"pooledtx": 1,
"chain": "main",
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
}
getpeerinfo
Code:

[
{
"id": 0,
"addr": "127.0.0.1:58886",
"addrbind": "127.0.0.1:6333",
"services": "000000000000040d",
"relaytxes": true,
"lastsend": 1547002445,
"lastrecv": 1547002445,
"bytessent": 4939,
"bytesrecv": 1080,
"conntime": 1547001965,
"timeoffset": 0,
"pingtime": 0.000418,
"minping": 0.000316,
"version": 70015,
"subver": "/Satoshi:0.17.99/",
"inbound": true,
"addnode": false,
"startingheight": 0,
"banscore": 0,
"synced_headers": -1,
"synced_blocks": -1,
"inflight": [
],
"whitelisted": false,
"minfeefilter": 0.00001000,
"bytessent_per_msg": {
"block": 250,
"cmpctblock": 3126,
"feefilter": 32,
"getheaders": 93,
"headers": 212,
"inv": 183,
"ping": 160,
"pong": 160,
"sendcmpct": 66,
"sendheaders": 24,
"tx": 482,
"verack": 24,
"version": 127
},
"bytesrecv_per_msg": {
"feefilter": 32,
"getaddr": 24,
"getdata": 244,
"getheaders": 186,
"ping": 160,
"pong": 160,
"sendcmpct": 99,
"sendheaders": 24,
"verack": 24,
"version": 127
}
}
]
Code:
0200000000010175a55043385a47f725e5a4a6a11f987f51f43fb0b09832c9bc16d22b15db4e980000000017160014e62e2ee223556551100d9e999d2bc334dac83f42fdffffff0254d02c120100000017a9147e92ec13bb97a74588e11a7f9d33a9e68314044e8700c2eb0b0000000017a914184e89e76e84cc73561ff4920561ab038b058542870247304402203c28d4d768495fe8721fe17154dbc0ba8492a19790a4193aaaec28c75d4559b5022012e1c81d1c9d55fbc5d4b6b33e0e0a45d190d7d800d61c06e12feb75b46f51290121039dfb7a582ba7fd851d6ef4f9bf0092efafcad9f2fddd0b7d333cf11bd01e05460c000000
For second node :
getminiginfo
Code:
{
"blocks": 13,
"currentblockweight": 0,
"currentblocktx": 0,
"difficulty": 1,
"networkhashps": 0.009866452320361751,
"pooledtx": 1,
"chain": "main",
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
}
getpeerinfo
Code:
21:48:42

{
"blocks": 12,
"currentblockweight": 0,
"currentblocktx": 0,
"difficulty": 1,
"networkhashps": 0.009107671645756934,
"pooledtx": 0,
"chain": "main",
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
}
22:00:52

getmininginfo
22:00:52

{
"blocks": 13,
"currentblockweight": 0,
"currentblocktx": 0,
"difficulty": 1,
"networkhashps": 0.009866452320361751,
"pooledtx": 1,
"chain": "main",
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
}
22:01:49

getpeerinfo
22:01:49

[
{
"id": 0,
"addr": "127.0.0.1:6333",
"addrbind": "127.0.0.1:58886",
"services": "000000000000040d",
"relaytxes": true,
"lastsend": 1547002805,
"lastrecv": 1547002805,
"bytessent": 1272,
"bytesrecv": 5131,
"conntime": 1547001965,
"timeoffset": 0,
"pingtime": 0.000399,
"minping": 0.00024,
"version": 70015,
"subver": "/Satoshi:0.17.99/",
"inbound": false,
"addnode": true,
"startingheight": 0,
"banscore": 0,
"synced_headers": 13,
"synced_blocks": 13,
"inflight": [
],
"whitelisted": false,
"minfeefilter": 0.00001000,
"bytessent_per_msg": {
"feefilter": 32,
"getaddr": 24,
"getdata": 244,
"getheaders": 186,
"ping": 256,
"pong": 256,
"sendcmpct": 99,
"sendheaders": 24,
"verack": 24,
"version": 127
},
"bytesrecv_per_msg": {
"block": 250,
"cmpctblock": 3126,
"feefilter": 32,
"getheaders": 93,
"headers": 212,
"inv": 183,
"ping": 256,
"pong": 256,
"sendcmpct": 66,
"sendheaders": 24,
"tx": 482,
"verack": 24,
"version": 127
}
}
]
getrawtransaction 9df617feddf83c2eee4cb6c15b57471ad8f5070c46a8685a2984f463419adbf1
Code:
0200000000010175a55043385a47f725e5a4a6a11f987f51f43fb0b09832c9bc16d22b15db4e980000000017160014e62e2ee223556551100d9e999d2bc334dac83f42fdffffff0254d02c120100000017a9147e92ec13bb97a74588e11a7f9d33a9e68314044e8700c2eb0b0000000017a914184e89e76e84cc73561ff4920561ab038b058542870247304402203c28d4d768495fe8721fe17154dbc0ba8492a19790a4193aaaec28c75d4559b5022012e1c81d1c9d55fbc5d4b6b33e0e0a45d190d7d800d61c06e12feb75b46f51290121039dfb7a582ba7fd851d6ef4f9bf0092efafcad9f2fddd0b7d333cf11bd01e05460c000000
Ports of first node are 6333 and 6332 for rpc. Ports for second node are 13500 and 13501 for rpc.
Are you sure your transaction is in the mempool ? Try
Hi, yes. I'm pretty sure. I used the command(It works without 1) and I got that transaction ID. If you run it too, you can see it. Very strange!Code:
getrawmempool 1
I just changed some things according to https://bitcointalksearch.org/topic/m.35016844 guide.Created a new genesis block according to my new difficulty(nBits) which was 0x1f0fffff and powLimit in chainparams.cpp was changed to 0x000ffff...f .Also commented this line in mining.cpp :
Code:
if (IsInitialBlockDownload())
throw JSONRPCError(RPC_CLIENT_IN_INITIAL_DOWNLOAD, "Bitcoin is downloading blocks...");
Finally changed coinbase maturity to 10.
I guess you changed the peer magic values?
If your running in VM's on the same machine you may have firewall issues?
Post the outputs of the following in code tags from both consoles.
getmininginfo
getpeerinfo
getrawtransaction
Are you sure your transaction is in the mempool ? Try
Hi, yes. I'm pretty sure. I used the command(It works without 1) and I got that transaction ID. If you run it too, you can see it. Very strange!Code:
getrawmempool 1
I just changed some things according to https://bitcointalksearch.org/topic/m.35016844 guide.Created a new genesis block according to my new difficulty(nBits) which was 0x1f0fffff and powLimit in chainparams.cpp was changed to 0x000ffff...f .Also commented this line in mining.cpp :
Code:
if (IsInitialBlockDownload())
throw JSONRPCError(RPC_CLIENT_IN_INITIAL_DOWNLOAD, "Bitcoin is downloading blocks...");
Finally changed coinbase maturity to 10.
Are you sure your transaction is in the mempool ? Try
Hi, yes. I'm pretty sure. I used the command(It works without 1) and I got that transaction ID. If you run it too, you can see it. Very strange!Code:
getrawmempool 1
Hi,
Are you sure your transaction is in the mempool ? Try
to be sure and to know a little more about your tx.
Are you sure your transaction is in the mempool ? Try
Code:
getrawmempool 1
Several weeks ago I asked same question. I created my private chain with a very low difficulty (for implementing some tests) and when testing the network and creating transactions they get lost some how!!! Here's a scenario with images attached:
1. I created two node s on same machine, mined one of them till my custom coinbase maturity (I changed it to 10 blocks).
2. I made a transaction from first node to second node (2 btcs), then mined it with second node using command "generate 1". Till this stage it worked fine. See the image for results (first node is in the left and second node is in the right):
3.In this stage no matter from which side I create transactions. It gets stuck in memory pool. No matter how hard i try to mine it, no peer would add it to the chain. I created another transaction from first node to second node. See the picture.
I don't this the problem is with fee because with enough fee I still have the problem.
The link to my repository is : https://github.com/chameleon1239/bitcoin.git
Any one has any idea? I didn't change the source code for confirming transactions or memory pool.
1. I created two node s on same machine, mined one of them till my custom coinbase maturity (I changed it to 10 blocks).
2. I made a transaction from first node to second node (2 btcs), then mined it with second node using command "generate 1". Till this stage it worked fine. See the image for results (first node is in the left and second node is in the right):
3.In this stage no matter from which side I create transactions. It gets stuck in memory pool. No matter how hard i try to mine it, no peer would add it to the chain. I created another transaction from first node to second node. See the picture.
I don't this the problem is with fee because with enough fee I still have the problem.
The link to my repository is : https://github.com/chameleon1239/bitcoin.git
Any one has any idea? I didn't change the source code for confirming transactions or memory pool.
Jump to: