Topic: need a mobo for 4x5850s (Read 839 times)
im just going to go with sapphires 3x6950s 2gb cards. with my employee discount and rebates im paying about 215 a card. i have order 2 so it will be here wednesday i think. going to get the msi gd70 mobo and a silverstone 1200w psu.
well seeing how amazon wont have those 5850s for awhile im starting to go with 3x 2gb sapphire cards. what do you guys think?
It's unlikely that you'll find any 5850s anytime soon, unless you buy them used.
what kind of 2gb sapphires..?
I'm assuming 6950's?
the 58XX's are best performers and 6990.
5830 are just under the 5850 for $/Mh look for em.
Or if you can find some places with 5870's still I saw some powercolors on a month ago (missed it unfortunetly) for 165$ a pop!!!
I'm assuming 6950's?
the 58XX's are best performers and 6990.
5830 are just under the 5850 for $/Mh look for em.
Or if you can find some places with 5870's still I saw some powercolors on a month ago (missed it unfortunetly) for 165$ a pop!!!
well seeing how amazon wont have those 5850s for awhile im starting to go with 3x 2gb sapphire cards. what do you guys think?
Darn I should have went with that board, I went with a
http://www.newegg.ca/Product/Product.aspx?Item=N82E16813157262
It'll do the 3 cards I wanted to fit on it but =\ gonna have to take a dremel to last slot to get exhaust to fit.
http://www.newegg.ca/Product/Product.aspx?Item=N82E16813157262
It'll do the 3 cards I wanted to fit on it but =\ gonna have to take a dremel to last slot to get exhaust to fit.
thanks for the info i actually went with the msi board. its 165 with my discount. the cards were 450 with same discount. just need a decent psu now. what would you guys recommend?
This is the one that lots of people recommend:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130274
And it has room for all 4 of my cards without any extenders needed.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130274
And it has room for all 4 of my cards without any extenders needed.
This would be my recommendation. I have one loaded with 4 nVidia cards (different project) and it works perfectly.
http://blog.cryptohaze.com/2011/06/quad-gpu-builds-with-case.html is my build - I wanted a case, since I like moving things around. The Antec 900v3 (and apparently v2) have 8 expansion slots in the back to support 4 dual-height GPUs.
You can certainly screw around with extenders, expanders, etc, but personally, I don't think it's worth it. Then again, I did build this for other projects, so cost was less of an issue (I didn't build it to do bitcoin mining - clearly).
uce,
At the price range you are looking at, you might as well get the GD70 so you can put the cards right on the board. But if you want to put it in a case, that may give you overheating (3 cards will be fine though). If you want to keep costs down, just go caseless with extenders. In that case, even a board like the Biostar A870u3 for $65 will work fine. It has 2 pcie x1 connectors, and with risers you can get 4 GPUs running on this board. The better you are at getting costs down, the faster you get to profit.
At the price range you are looking at, you might as well get the GD70 so you can put the cards right on the board. But if you want to put it in a case, that may give you overheating (3 cards will be fine though). If you want to keep costs down, just go caseless with extenders. In that case, even a board like the Biostar A870u3 for $65 will work fine. It has 2 pcie x1 connectors, and with risers you can get 4 GPUs running on this board. The better you are at getting costs down, the faster you get to profit.
This is the one that lots of people recommend:
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130274
And it has room for all 4 of my cards without any extenders needed.
If I were you, I would consider it, since it would at least hold your 4 cards securely in their slots without using extenders or figuring out where/how to mount the 4th card.
I am currently using it with 2x5850 and 2x5830 and an Antec 1200Watt PS in this case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811108376
Works pretty great, but I have both side covers off the case and two small personal fans pointing at the cards to keep them below 80 degrees. Otherwise, I have had no problems with any of it.
http://www.newegg.com/Product/Product.aspx?Item=N82E16813130274
And it has room for all 4 of my cards without any extenders needed.
If I were you, I would consider it, since it would at least hold your 4 cards securely in their slots without using extenders or figuring out where/how to mount the 4th card.
I am currently using it with 2x5850 and 2x5830 and an Antec 1200Watt PS in this case:
http://www.newegg.com/Product/Product.aspx?Item=N82E16811108376
Works pretty great, but I have both side covers off the case and two small personal fans pointing at the cards to keep them below 80 degrees. Otherwise, I have had no problems with any of it.
hello im looking for a mobo that can fit 4x5850s. not trying to spend to much because im trying to keep my cost down. it has to be AMD. just wondering if i can get this mobo and use extenders?
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157208
or
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157207
also how do the extenders work? which extenders would you guys recommend to get the 4th card to fit. this mining rig will not be in a case. these are my specs....
cpu - sempron 2.6
gpu - 4x5850 sapphire
psu - rosewill 1000w
hdd - 40gb sata drive
optical - dvd burner
OS - windows 7
thanks guy for any input that you put in!
edit: how about this board? for 4x5850s?
http://www.microcenter.com/single_product_results.phtml?product_id=0366425
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157208
or
http://www.newegg.com/Product/Product.aspx?Item=N82E16813157207
also how do the extenders work? which extenders would you guys recommend to get the 4th card to fit. this mining rig will not be in a case. these are my specs....
cpu - sempron 2.6
gpu - 4x5850 sapphire
psu - rosewill 1000w
hdd - 40gb sata drive
optical - dvd burner
OS - windows 7
thanks guy for any input that you put in!
edit: how about this board? for 4x5850s?
http://www.microcenter.com/single_product_results.phtml?product_id=0366425
Jump to: