Topic: Need Cointerra software fix, willing to pay for working software correction (Read 1577 times)

Hello all programmers with experience in CGminer and Cointerra systems.  We are currently running a number of cointerra systems.  I have come to the conclusion that the software that regulates the chips voltage is problematic and doesn't work right.  On a notable amount of machines when down clocked the machines start off at a slightly higher than normal voltage but instead of slowly lowering the voltage to an acceptable level it goes the other way until the voltage is way over where it should be.  This causes atrocious efficiency and most likely causes the boards to fail over time as their running way hotter than they should be.

I'm hoping someone can do one of two things to the cointerra version 7.56 software:

Option 1: put an adjustable limiter into the software so that the system cannot adjust the voltage above a preset amount that would be configurable in the web interface much like the speed setting is configured in web interface.  It could be simply a drop down menu that is like 0.6V 0.615V 0.62V etc.

Option 2: completely remove the voltage regulating software in the cointerra machines and simply set a preset voltage based on the speed selector.  For example at speed 4 it would be like .63V or something to that effect.

I'm willing to pay for someone to fix these issues.

I can be reached at 408.582.8878 or PM me

Regards,
Yan