Topic: Need help S9 Miner stopped working... (Read 417 times)
which firmware did you use?
**The firmware update worked and now all 3 boards are mining***
Sorry, one other thing to add...
The green normal light is not blinking
I was able to find a firmware and now the red light is showing on the board that it wasn't, still nothing showing in the categories for
hardware version and bitminer version when I go to the network settings but that might be because it needs time to boot up since it has
been restored to the factory settings?
The green normal light is not blinking
I was able to find a firmware and now the red light is showing on the board that it wasn't, still nothing showing in the categories for
hardware version and bitminer version when I go to the network settings but that might be because it needs time to boot up since it has
been restored to the factory settings?
Ill try and make this brief
1. Yesterday one of my boards stopped working the other 2 were mining fine
2. I tried to figure out what was wrong with the board and tried to reset the miner and I also did the IP report reset which I thought would take me back to factory settings
3. Now I cannot get the miner to mine at all, on one of the boards there is no red light
4. I can access the IP address but get the following information (I didn't know how to upload an image)
Miner Type Antminer S9
Hostname antMiner
Model GNU/Linux
Hardware Version
Kernel Version Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
File System Version Fri Jul 21 05:15:25 EDT 2017
Logic Version S9V2.23
BMminer Version
Uptime 23
Load Average 0.00, 0.01, 0.00
There is nothing in the hardware version or BMiner version category so I think when I did the IP report reset I erased the firmware??
5. I have tried to get firmware from bitmain but their website is unusable, are there any external sources for the firmware?
I would really appreciate any help the miner seems to be running fine I think its a configuration issue but I'm kinda lost as to what to do.
Thanks
1. Yesterday one of my boards stopped working the other 2 were mining fine
2. I tried to figure out what was wrong with the board and tried to reset the miner and I also did the IP report reset which I thought would take me back to factory settings
3. Now I cannot get the miner to mine at all, on one of the boards there is no red light
4. I can access the IP address but get the following information (I didn't know how to upload an image)
Miner Type Antminer S9
Hostname antMiner
Model GNU/Linux
Hardware Version
Kernel Version Linux 3.14.0-xilinx-gb190cb0-dirty #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
File System Version Fri Jul 21 05:15:25 EDT 2017
Logic Version S9V2.23
BMminer Version
Uptime 23
Load Average 0.00, 0.01, 0.00
There is nothing in the hardware version or BMiner version category so I think when I did the IP report reset I erased the firmware??
5. I have tried to get firmware from bitmain but their website is unusable, are there any external sources for the firmware?
I would really appreciate any help the miner seems to be running fine I think its a configuration issue but I'm kinda lost as to what to do.
Thanks
Jump to: