Topic: Need help setting up my my first b250 mining expert motherboard (Read 160 times)

I just got the b250 fintech 13 pci now too and I got nothing agian is it something I’m doing wrong. This motherboard started right up this  time without neeeding to jump the power, but still no video and my Radeon is not turning on either , I purchased an asus dvd drive so I can insert the cd rims but I tried everything I have no display from either motherboards. With no gpu or with the Radeon in. I also have another video card from an old computer I put in and still nothing. The light is on cpu on the motherboard could it be an issue with my intel i3? I can send pictures I don’t know how to post them though it’s and I tell i3 9th gen 9100f 300 series 65w

only connect one stick of ram in mob
mob connected to psu and no gpu plugged in
then connect the display cable of the monitor to the motherboard slot and see if the display shows
troubleshoot it step by step

Any suggestions

Okay this is the btc coin area. I asked mods to move your thread to alt coin section.

Now to make a suggestion.

Return all of it.

Don’t do a 19 card rig to start.

Do something simple. Then expand if you like it.

Hello, my name is jared I’m new   this website and a little new to mining. I recently purchased an Asus b250 mining expert 19 slot motherboard as my first mining rig. I have a 2000 watt psu  to begin with, it runs one 24 pin and 8 pin power supply . I have an i3 processor . With 2 8 gb ram chips, and 16 x pci extensions . I amtrying to run my first Radeon 580 duel fan gpu .

Let me know if I forgot to mention anything but I gotta 16 x card case with 120mm fan also on it, my issues go further then this though
I got all the pieces together last week, and was so excited to get her started up , unfortunately I did forget a power button and did not try to jump it as I didn’t want to ruin anything to soon. Regardless, I got the button in a few day later and went to try my first rig, and....nothing. Nothing even made a click or a tick, there was no sign of anything working. So initially I thought it was the psu, so I found out how to test it by jumping the power, and that worked just fine. The fans ran and the power started . At the time I figured it was maybe the motherboard so I put a different one to power and it started right up. So I got a new motherboard today and , same thing, nothing. So I jumped the psu from the back of the plug while still plugged into the motherboard and finally I got the whole motherboard to power up. Well most of it. I have a red light on the pci extension and connector for the gpu , but no power, no fans on the gpu are spinning, and no video display for either the motherboard hdmi output or the video gpu output. Please hellppp