Try these settings... whenever my card pushed past 85c, the settings below would bring it down to 81-83c right away. Be advised, this card runs very hot and needs good ventilation
--scrypt -g 1 -w 256 -I 20 --thread-concurrency 32765 --gpu-fan auto --temp-target 80 --lookup-gap 2 --gpu-engine 940 --gpu-memclock 1250 --gpu-powertune 20
These settings get me a stable 835KH/s
Topic: need help with cgminer settings for R9 290 (Read 620 times)
found out, i have the refence fan installed, just played a game and its still runnig hot, like 85c :/
in idle its 60-62 :/
this "--thread-concurrency 32765" did not help, it cut the kh/s in half and was running 400-450.
in idle its 60-62 :/
Quote
del scrypt*.bin
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
--scrypt -g1 -w 512 -I 19 --gpu-fan auto --temp-target 80 --temp-overheat 90 --temp-cutoff 95 --lookup-gap2 --gpu-engine 1000 --gpu-memclock 1250 --gpu-powertune 20
running this, but the auto fan, is really bad, havent seen it go above 38% and i had to quit the mining after it reached 92 degrees, but iam using 51% fan cooling and getting 810 out of itsetx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
--scrypt -g1 -w 512 -I 19 --gpu-fan auto --temp-target 80 --temp-overheat 90 --temp-cutoff 95 --lookup-gap2 --gpu-engine 1000 --gpu-memclock 1250 --gpu-powertune 20
this "--thread-concurrency 32765" did not help, it cut the kh/s in half and was running 400-450.
if you're getting too hot it may be a case ventilation problem, I have the same card and get 865khs at 84degrees using
--scrypt -g1 -w 512 -I 19 --thread-concurrency 32765 --gpu-fan auto --temp-target 80 --temp-overheat 90 --temp-cutoff 95 --lookup-gap2 --gpu-engine 1000 --gpu-memclock 1250 --gpu-powertune 20
and of course don't forget to start your .bat with:
del scrypt*.bin
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
--scrypt -g1 -w 512 -I 19 --thread-concurrency 32765 --gpu-fan auto --temp-target 80 --temp-overheat 90 --temp-cutoff 95 --lookup-gap2 --gpu-engine 1000 --gpu-memclock 1250 --gpu-powertune 20
and of course don't forget to start your .bat with:
del scrypt*.bin
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
need help with the cgminer settings, kinda got it run stable with -I 10, but thats 63 kh/s and the heat was around 80, just for that setting, sat the fan to 55, any other tries i had, ended up in b.s.o.d, we are talking about MSI R9 290 4GD5 card, brand new, iam kinda lost, when it comes to cgminer, its core clock is 947 and memory clock is 1250,, even got a b.s.o.d with 80%fan and -I 15 on about 70 in heat.
using driver version 13.12 and cgminer 3.7.2.
my computer specs are:
I5 3570k
16gigs of ram
PSU: 750w
one R9 290 card
OS: Win 7 64bit
plz help
using driver version 13.12 and cgminer 3.7.2.
my computer specs are:
I5 3570k
16gigs of ram
PSU: 750w
one R9 290 card
OS: Win 7 64bit
plz help
Jump to: