to be rigorous:
A1 is PS_ON, B4 is AC_INHIBIT
if you measure voltage you will not get nothing till you put something consuming. I used a spare 12v fan to test
Topic: need help with psu emerson 1200 (Read 301 times)
Interesting. For future reference to those looking up this thread, A1 is PS_ON, B4 is AC_OK (AC is present).
Nice work, cheers!
Nice work, cheers!
I found solution.
A1 and B4 pin to ground and power ON ok
A1 and B4 pin to ground and power ON ok
I don't have one of those to play with, but I suspect you need to activate both PS_ON along with PS_SEATED to get it to start up.
That's where I'd start anyway! Good luck!!
That's where I'd start anyway! Good luck!!
I have 3 psus from old spondoolies sp31. I want to recycle and power on alone for other miner.
I get pinout from web for a emerson 1200, but I am not able to power on.
https://www.rcgroups.com/forums/showthread.php?2606324-Astec-DS1200-3-server-power-supply
thanks help for getting power on this unit.
I get pinout from web for a emerson 1200, but I am not able to power on.
https://www.rcgroups.com/forums/showthread.php?2606324-Astec-DS1200-3-server-power-supply
thanks help for getting power on this unit.
Jump to: