mining_proxy.exe -o stratum.btcguld.com -p 3333
Level 1 machinist? I'm a machinist too
Topic: Need some help to start my Blade V2.......with picture (Read 1202 times)
Use a bat file, like this
mining_proxy.exe -o stratum.btcguld.com -p 3333
Level 1 machinist? I'm a machinist too
mining_proxy.exe -o stratum.btcguld.com -p 3333
Level 1 machinist? I'm a machinist too
I'm trying to get this proxy to work... how do I point it at different pools?
I want to use the bitminter pool.
I want to use the bitminter pool.
It's a french joke... but not sure in enghish it done the same....
Yeah finally it work;
maybe see you later on an over post;
Yeah finally it work;
maybe see you later on an over post;
You only need to use bfgminer or mining proxy, not both. I suggest you stay with mining proxy.
I'm not sure how your pool does rounds, but most will last for a set time. You'll likely need to look around on your pool's website to find out for sure. Don't confuse finding a block with a pool round, they are different. Rounds last for a few blocks generally, it's done this way to keep people from switching between lots of pools for profit.
I'm also not sure what you mean by "don't work for the wind?" but glad to see you have it working finally!
I'm not sure how your pool does rounds, but most will last for a set time. You'll likely need to look around on your pool's website to find out for sure. Don't confuse finding a block with a pool round, they are different. Rounds last for a few blocks generally, it's done this way to keep people from switching between lots of pools for profit.
I'm also not sure what you mean by "don't work for the wind?" but glad to see you have it working finally!
Well...i understand now;
I change the secondary dns, the webport and to the server adress i enter 192.168.1.62;192.168.1.62 my computer IP
mining proxy is at work ;
bfgminer is open, configurate with url stratum.bitcoin.cz:3333 and my mining.bitcoin.cz " log information"
I update the blade and now i have this message "" The parameters are updated or the system is simply restarted! 651 ""
now i wait ? blade restart alone?
over question, BFGminer is a good pool?
Thanks you pontiacg5,
Morpheus
I change the secondary dns, the webport and to the server adress i enter 192.168.1.62;192.168.1.62 my computer IP
mining proxy is at work ;
bfgminer is open, configurate with url stratum.bitcoin.cz:3333 and my mining.bitcoin.cz " log information"
I update the blade and now i have this message "" The parameters are updated or the system is simply restarted! 651 ""
now i wait ? blade restart alone?
over question, BFGminer is a good pool?
Thanks you pontiacg5,
Morpheus
No problem
Some people have better luck with mining_proxy.exe than BFGminer. Each should do the same job. Regardless, BFGminer is just a mining program acting as a stratum proxy not a pool.
After you see this message
"" The parameters are updated or the system is simply restarted! 651 ""
Copy and paste this into the web browser
http://192.168.1.254:8000
Then, hit the refresh button on the bottom left. You should see a hashrate and some accepted shares then.
If you could, can you post the command you are using to launch BFGminer to be sure you are using it as a stratum proxy?
Hey, hi Pontiac I fix my problem;
I test with the config you tell me but, in a first time it don't work;
I test a lot of things, i read a lot and now i have a good screan on my blade
I replace them like that, ( on my blade, server : My PC IP) 192.168.1.62(,)192.168.1.62
Not " ; " but " ," and it work very good ( i think )
I close BFGminer and i use Mining_proxy.exe it's good like this or i open BFG?
The First hour i shares 0.00169392 BTC it's more good than 0,00003006 BTC in 48H
Now blade work at 98% - 100,80%
But maybe 1 probleme... i don't know.
do you know, usually How many time for 1 round?
Blade work, my log in Mining.bitcoin.cz share but 1 round is open during the last 4hours it's normal? blade don't work for the wind?
Thanks for all, have a good day,
Well...i understand now;
I change the secondary dns, the webport and to the server adress i enter 192.168.1.62;192.168.1.62 my computer IP
mining proxy is at work ;
bfgminer is open, configurate with url stratum.bitcoin.cz:3333 and my mining.bitcoin.cz " log information"
I update the blade and now i have this message "" The parameters are updated or the system is simply restarted! 651 ""
now i wait ? blade restart alone?
over question, BFGminer is a good pool?
Thanks you pontiacg5,
Morpheus
I change the secondary dns, the webport and to the server adress i enter 192.168.1.62;192.168.1.62 my computer IP
mining proxy is at work ;
bfgminer is open, configurate with url stratum.bitcoin.cz:3333 and my mining.bitcoin.cz " log information"
I update the blade and now i have this message "" The parameters are updated or the system is simply restarted! 651 ""
now i wait ? blade restart alone?
over question, BFGminer is a good pool?
Thanks you pontiacg5,
Morpheus
No problem
Some people have better luck with mining_proxy.exe than BFGminer. Each should do the same job. Regardless, BFGminer is just a mining program acting as a stratum proxy not a pool.
After you see this message
"" The parameters are updated or the system is simply restarted! 651 ""
Copy and paste this into the web browser
http://192.168.1.254:8000
Then, hit the refresh button on the bottom left. You should see a hashrate and some accepted shares then.
If you could, can you post the command you are using to launch BFGminer to be sure you are using it as a stratum proxy?
Well...i understand now;
I change the secondary dns, the webport and to the server adress i enter 192.168.1.62;192.168.1.62 my computer IP
mining proxy is at work ;
bfgminer is open, configurate with url stratum.bitcoin.cz:3333 and my mining.bitcoin.cz " log information"
I update the blade and now i have this message "" The parameters are updated or the system is simply restarted! 651 ""
now i wait ? blade restart alone?
over question, BFGminer is a good pool?
Thanks you pontiacg5,
Morpheus
I change the secondary dns, the webport and to the server adress i enter 192.168.1.62;192.168.1.62 my computer IP
mining proxy is at work ;
bfgminer is open, configurate with url stratum.bitcoin.cz:3333 and my mining.bitcoin.cz " log information"
I update the blade and now i have this message "" The parameters are updated or the system is simply restarted! 651 ""
now i wait ? blade restart alone?
over question, BFGminer is a good pool?
Thanks you pontiacg5,
Morpheus
After that change the web address in your browser back to the IP address of your blade, plus the port number (8000) and press enter again.
What is the IP address of your computer? Your blade config should look like this
IP: 192.168.1. 254
mask: 255.255.255.0
gateway:192.168.1.1
webport:8000
Primary DNS:192.168.1.1
secondary dns: 8.8.8.8
ports: 8332;8332
server address: (computer's IP);(computer's IP) Should be 192.168.1.x;192.168.1.x
User:pass: morpheus1:worker1;morpheus1:worker1
The hashrate will generally show up as zeros until you refresh the configuration page.
What is the IP address of your computer? Your blade config should look like this
IP: 192.168.1. 254
mask: 255.255.255.0
gateway:192.168.1.1
webport:8000
Primary DNS:192.168.1.1
secondary dns: 8.8.8.8
ports: 8332;8332
server address: (computer's IP);(computer's IP) Should be 192.168.1.x;192.168.1.x
User:pass: morpheus1:worker1;morpheus1:worker1
The hashrate will generally show up as zeros until you refresh the configuration page.
Zeros are good, so long as they are next to the "chip:" section, those show that everything is working right. Mine does show zeros for the hashrate sometimes, but refreshing the configuration page shows the right hashrate.
The blade should be on the same subnet as your computer running mining_proxy. If the modem/router is 192.168.0.x than the blade should be 192.168.0.x as well. The blade needs to be sending shares to the computer running the mining proxy program, so yes, use the ip address of the computer.
10gh/s should get you around .01 btc a day.
The blade should be on the same subnet as your computer running mining_proxy. If the modem/router is 192.168.0.x than the blade should be 192.168.0.x as well. The blade needs to be sending shares to the computer running the mining proxy program, so yes, use the ip address of the computer.
10gh/s should get you around .01 btc a day.
Zero are on
Total MHS: 00000
Received: 0000000000
Accepted: 0000000000
Per Minute: 000.00
Efficiency: 000.00%
Up Time: 0d,00h,00m,06s but i share.
Blade can have a probleme or it's my configuration? i go to change ip to the same with my computer.
when i update my blade i have this message ---The parameters are updated or the system is simply restarted! 704 ----- andafter nothing more I have to restart the blade with hand or wait ? ( yesterday i wait 1 hours but after 1 hours nothing)
Zeros are good, so long as they are next to the "chip:" section, those show that everything is working right. Mine does show zeros for the hashrate sometimes, but refreshing the configuration page shows the right hashrate.
The blade should be on the same subnet as your computer running mining_proxy. If the modem/router is 192.168.0.x than the blade should be 192.168.0.x as well. The blade needs to be sending shares to the computer running the mining proxy program, so yes, use the ip address of the computer.
10gh/s should get you around .01 btc a day.
The blade should be on the same subnet as your computer running mining_proxy. If the modem/router is 192.168.0.x than the blade should be 192.168.0.x as well. The blade needs to be sending shares to the computer running the mining proxy program, so yes, use the ip address of the computer.
10gh/s should get you around .01 btc a day.
_ I've mining.exe and make it work on my computer;
_ I instal BFG miner for windows7-64bit config it on url : stratum.bitcoin.cz:3333 the same i use on my blade.
i'm log in mining.bitcoin.cz my blade work, I produce 0,00003006BTC in little less than 48hours (( it's a good work?))
but i still have a problem; no activity on my blade. zero everywhere
Pontiacg5 you said " you need to set the blade's mining server to the IP address of your computer running mining proxy "
it's exact? i don't set my blade to the ip of my router but to the IP of my computer?
I have to change gateway for the gateway of my router?
Sorry for my bad english and Thanks for your help.
You have to set two mining pool servers and respective workers.
Seperate the servers with a comma and remove the port from the server address and edit the port section.
You need to use stratum proxy, slush has provided this on his site and you can use it for other pools also.
Seperate the servers with a comma and remove the port from the server address and edit the port section.
You need to use stratum proxy, slush has provided this on his site and you can use it for other pools also.
Unfortunately the blade does not have stratum support, it only uses the old getwork protocol. You won't be able to connect directly to a stratum pool like you've done there.
Look up mining_proxy.exe, I think it's provided by slush's pool. You will need a computer to run mining proxy, and you need to set the blade's mining server to the IP address of your computer running mining proxy. By default it connects to slush's pool, but you can start it with a .bat file to connect to any pool. "mining_proxy.exe -o stratum.btcguild.com -p 3333"
Look up mining_proxy.exe, I think it's provided by slush's pool. You will need a computer to run mining proxy, and you need to set the blade's mining server to the IP address of your computer running mining proxy. By default it connects to slush's pool, but you can start it with a .bat file to connect to any pool. "mining_proxy.exe -o stratum.btcguild.com -p 3333"
Leave the password blank, you don´t need to type it in.
Have you checked your router? If the blade gets a IP etc.
Have you checked your router? If the blade gets a IP etc.
Hi everybody,
Recently i aquéred a blade V2 for mining , but I have problem to config and start it;
I use this guide ::::::: https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369
to connect my blade but when i enter my information and refresh it don't work.
What is wrong ::::?? (( the only thing I don't enter for the forum is my password ))
after refresh :
I Need somebody to help me please, Thanks, Morpheus
Recently i aquéred a blade V2 for mining , but I have problem to config and start it;
I use this guide ::::::: https://bitcointalksearch.org/topic/guide-dogies-comprehensive-asicminer-blade-setup-205369
to connect my blade but when i enter my information and refresh it don't work.
What is wrong ::::?? (( the only thing I don't enter for the forum is my password ))
after refresh :
I Need somebody to help me please, Thanks, Morpheus
Jump to: