It was a driver issue. Running smooth now I need to set up a back up pool!
Topic: Need your help with a Lancelot FPGA, please. (Read 934 times)
Check that you don't have a device using the unit. And make sure it's connected with com6 if that's what you are using in cgminer. You should be able to find the com port in your device manager..
Also, did you launch with admin privileges?
Also, did you launch with admin privileges?
Can someone put together a noob friendly set up
To run my new lancelot with CGMiner. With the sources to get CGminer
I have it plugged into my laptop couldn't get it to work on bitminter?
I really don't know what I'm doing...help
To run my new lancelot with CGMiner. With the sources to get CGminer
I have it plugged into my laptop couldn't get it to work on bitminter?
I really don't know what I'm doing...help
I'm trying now with bfgminer
Here's the comand line I'm using :
bfgminer -G -o stratum.btcguild.com:3333 -u advs108_1 -p 123
and the error message is "All devices disabled, cannot mine!"
How can I tell bfgminer to mine on the lancelot, on COM6 ?
the bfg version is 3.1.0-win64
Thank you for your help !
Here's the comand line I'm using :
bfgminer -G -o stratum.btcguild.com:3333 -u advs108_1 -p 123
and the error message is "All devices disabled, cannot mine!"
How can I tell bfgminer to mine on the lancelot, on COM6 ?
the bfg version is 3.1.0-win64
Thank you for your help !
Progressing !
used this command line : bfgminer -G -S all -o stratum.btcguild.com:3333 -u advs108_1 -p 123
Now, the problem seems "do not have the privileges riquired to open the com 6"
check the screen capture : http://screencast.com/t/OAkNEjOr
Do you have any idea how to fix that ? (Win 7)
Hello
Still not working... did I miss something ?
Here's what I did with Zadig :
http://screencast.com/t/ZQNT7sJsnJw
here's the screen capture of cgminer :
http://screencast.com/t/xDgkUfkG
Any Ideas ?
Error -1 is an I/O error. There's likely a problem somewhere in your cables, connections or USB ports.Still not working... did I miss something ?
Here's what I did with Zadig :
http://screencast.com/t/ZQNT7sJsnJw
here's the screen capture of cgminer :
http://screencast.com/t/xDgkUfkG
Any Ideas ?
Yes, I agree, this is definitively that kind of problem... I just don't know how to fix it. I changed cable, installed all drivers... But...
Hello
Still not working... did I miss something ?
Here's what I did with Zadig :
http://screencast.com/t/ZQNT7sJsnJw
here's the screen capture of cgminer :
http://screencast.com/t/xDgkUfkG
Any Ideas ?
Error -1 is an I/O error. There's likely a problem somewhere in your cables, connections or USB ports. Still not working... did I miss something ?
Here's what I did with Zadig :
http://screencast.com/t/ZQNT7sJsnJw
here's the screen capture of cgminer :
http://screencast.com/t/xDgkUfkG
Any Ideas ?
I'm trying now with bfgminer
Here's the comand line I'm using :
bfgminer -G -o stratum.btcguild.com:3333 -u advs108_1 -p 123
and the error message is "All devices disabled, cannot mine!"
How can I tell bfgminer to mine on the lancelot, on COM6 ?
the bfg version is 3.1.0-win64
Thank you for your help !
Here's the comand line I'm using :
bfgminer -G -o stratum.btcguild.com:3333 -u advs108_1 -p 123
and the error message is "All devices disabled, cannot mine!"
How can I tell bfgminer to mine on the lancelot, on COM6 ?
the bfg version is 3.1.0-win64
Thank you for your help !
Hello
Still not working... did I miss something ?
Here's what I did with Zadig :
http://screencast.com/t/ZQNT7sJsnJw
here's the screen capture of cgminer :
http://screencast.com/t/xDgkUfkG
Any Ideas ?
Still not working... did I miss something ?
Here's what I did with Zadig :
http://screencast.com/t/ZQNT7sJsnJw
here's the screen capture of cgminer :
http://screencast.com/t/xDgkUfkG
Any Ideas ?
My Lancelot is running nicely on 3.1.1
I just grabbed the driver of cardreaderfactory's website and it Works perfectly. Try bitminter client and see if that Works for you.
I just grabbed the driver of cardreaderfactory's website and it Works perfectly. Try bitminter client and see if that Works for you.
You mean the drivers found here : http://www.ftdichip.com/Drivers/VCP.htm ?
I did that, drivers installed OK, but have problem of com....
Right, but there is a way that cgminer talks to the device through winusb.
But if you can get a hold of a powered hub, that would probably solve the problem.
My Lancelot is running nicely on 3.1.1
I just grabbed the driver of cardreaderfactory's website and it Works perfectly. Try bitminter client and see if that Works for you.
I just grabbed the driver of cardreaderfactory's website and it Works perfectly. Try bitminter client and see if that Works for you.
You mean the drivers found here : http://www.ftdichip.com/Drivers/VCP.htm ?
I did that, drivers installed OK, but have problem of com....
My Lancelot is running nicely on 3.1.1
I just grabbed the driver of cardreaderfactory's website and it Works perfectly. Try bitminter client and see if that Works for you.
I just grabbed the driver of cardreaderfactory's website and it Works perfectly. Try bitminter client and see if that Works for you.
Upgrade your cgminer. They have rewritten the way USB works with Icarus units https://bitcointalksearch.org/topic/m.2507736
Also, if you are not using a powered USB hub, you should.
If that does not work, try using BFGminer.
Also, if you are not using a powered USB hub, you should.
If that does not work, try using BFGminer.
Hello,
I just received my fpga Lancelot. Waiting for my Raspberry to arrive, I wanted to test the card on window 7.
Installed the drivers with no problem, but it seems that I have a Comms error.
Please have a look at this screen capture : http://screencast.com/t/jnHzPbMthVde
Anybody have an idea on how to fix that problem ?
Thank you for your help
I just received my fpga Lancelot. Waiting for my Raspberry to arrive, I wanted to test the card on window 7.
Installed the drivers with no problem, but it seems that I have a Comms error.
Please have a look at this screen capture : http://screencast.com/t/jnHzPbMthVde
Anybody have an idea on how to fix that problem ?
Thank you for your help
Jump to: