you have mail from fabio from italy
thank you guys
Topic: New BFL-based Chili miners (30GH/s nominal) (Read 10552 times)
Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.
Looks like it got shipped today instead of the 19th. Darn, 1 less day of mining...
Thx MrTeal. Govmnt has its hands all over our bitcoin resources.
The amount of failure at the USPS knows no bounds. I had to call in yesterday again and wait on hold for an hour for the second time in a week in order to get a hold on the account cleared. We had some labels that were created mid-October that ended up not getting used and we canceled and refunded, but apparently they reuse labels and a couple of those numbers got used to send packages (from California) to China. Even if I called in, every time the package was scanned again I'd get an email telling me my account was locked and I owed them money. They couldn't stop it from happening, they could just clear it temporarily until the next time it scans. Their response was basically "Sorry about this, it happens. Just call in again next time and we'll clear it again."
Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.
Looks like it got shipped today instead of the 19th. Darn, 1 less day of mining...
[/quote]
Thx MrTeal. Govmnt has its hands all over our bitcoin resources.
Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.
Looks like it got shipped today instead of the 19th. Darn, 1 less day of mining...
[/quote]
No, they got dropped off at USPS yesterday before 6pm CST. I'm not sure why they didn't scan until today.
Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.
[/quote]
Looks like it got shipped today instead of the 19th. Darn, 1 less day of mining...
Sorry guys, we're not going to move down the line. They are just going to be relisted with the auction ending Thursday night, and shipping Friday.
Same conditions as this one, though I'd ask if you want to pay with Paypal or don't actually have any BTC and are trying to arraign a loan to buy them, don't bid until you have BTC.
https://bitcointalksearch.org/topic/new-bfl-based-chili-miners-6-available-340704
Thanks
Same conditions as this one, though I'd ask if you want to pay with Paypal or don't actually have any BTC and are trying to arraign a loan to buy them, don't bid until you have BTC.
https://bitcointalksearch.org/topic/new-bfl-based-chili-miners-6-available-340704
Thanks
Still after the 2 miners @1.03 - believe I was next in line 
So if there are any drop outs am I next in line?
Same question for me
So if there are any drop outs am I next in line?
Got my tracking number 
I would be interested in 1-2 if anyone further drops out.
When's the deadline for payment, in case others want a chance?
When will these be shipped?
For those that paid, they shipped today.When will these be shipped?
For those that paid, they shipped today.
When will these be shipped?
Interested in 1 @ 1.04 if any fall out. Shipping to Netherlands.
I would be interested in 1-2 if anyone further drops out.
Sorry, couldn't make it. I'll have to give up my 4.
So if there are any drop outs am I next in line?
Waiting on a PM MrTeal
Hi Mark,I sent one an hour and a half ago. Can you check your inbox?
Thanks.
I think they should all be out now.
Waiting on a PM MrTeal
Ok, which one of you bought up all the Antec Kuhler Shelf's? LOL.
I've got 4 here sitting and waiting for more chilis... after this auction I just need to scrounge up 1 more.
Ok, which one of you bought up all the Antec Kuhler Shelf's? LOL.
Thanks for the auction. Where would you like us to send payment and shipping info?
I'll PM the bidders once it's over.Thanks, it ended a couple of minutes ago correct?
Thanks for the auction. Where would you like us to send payment and shipping info?
I'll PM the bidders once it's over.
Thanks for the auction. Where would you like us to send payment and shipping info?
Mr Teal, can you show who is in the lead with bidding?
testit: [email protected]MarkE08: [email protected]
nexus99: [email protected]
ipextreme: [email protected]
Dorpsgek: [email protected]
dentldir: [email protected]
MrZambonie: [email protected]
nikolastm: [email protected]
tyler26: [email protected]
villex: [email protected]
nuffsaid420: [email protected]
_____________________________
markj113: [email protected]
Choadmeyer [email protected]
infamousdutch: [email protected]
Mr Teal, can you show who is in the lead with bidding?
testit: [email protected]MarkE08: [email protected]
nexus99: [email protected]
ipextreme: [email protected]
Dorpsgek: [email protected]
dentldir: [email protected]
mwax321: [email protected]
MrZambonie: [email protected]
nikolastm: [email protected]
tyler26: [email protected]
villex: [email protected]
_____________________________
villex: [email protected]
nuffsaid420: [email protected]
markj113: [email protected]
Choadmeyer [email protected]
infamousdutch: [email protected]
Cancel My Bid. Sorry
Can you post the current high bidders? I'm not sure if I am one of them.
1 @ 1.09
Raise my bid to 1.09
1 @ 1.09
2 @ 1.08
I've posted it a couple times in the Chili thread, but it's extremely hard to beat the value of the clearance Antec Kuhler Shelf
My cooling setup uses two of them (one as a backplate/VRM fan) cost a hair over $25, and it works stellar. The bottom one keeps the ASICs pressed nice and tight against the actual heatsink, and makes a great stand to hold the board up.
THANK YOU for posting this. I have been working on boosting Jalapenos with extra chips and cooling on the board; I found that running a copper heat sink on the bottom of the board provides as much cooling power as the stupid AL one plus fan does on top.My cooling setup uses two of them (one as a backplate/VRM fan) cost a hair over $25, and it works stellar. The bottom one keeps the ASICs pressed nice and tight against the actual heatsink, and makes a great stand to hold the board up.
Currently I am running 5 chips, 65c temps, thinking about going for 6. The JP's 1 volt supply is only rated for 80amps or so and I think if I go over 6 we will be screwed. How big/high power is the DC-DC 1 volt converter on your device? Did you need to go over 100a?
Thank you again. Here's a pic of my latest.. project (20gh)
I'll order one of those heat sinks for a better top one. Then I can go to 7 if I can backfeed the 1 volt supply/based on your thoughts.
Chris
MrTeal, what does it look like in standings?
4 x 1.08 (raise)
[email protected] revised bid
3 @ 1.25
If you want to auction off items, you should go to this new site. It looks very promising and I think it could be a great tool for Cryptocurrencies in general.
https://cryptohashauctions.info
You can auction anything from miners, to coins, to mining contracts (hash rates).
It is a very new site and it needs more exposure. Any listings would help.
https://cryptohashauctions.info
You can auction anything from miners, to coins, to mining contracts (hash rates).
It is a very new site and it needs more exposure. Any listings would help.
raise 1 @ 1.08
1 @ 1.04 (revised, please PM me if outbid)
1 @ 1.06
1 @ 1.04 (revised, please PM me if outbid)
[email protected] (raised bid)
1 @ 1.07
1 @ 1.04
Mr Teal, can you show who is in the lead with bidding?
mwax321: [email protected]Dorpsgek: [email protected]
ipextreme: [email protected]
nexus99: [email protected]
villex: [email protected]
nuffsaid420: [email protected]
markj113: [email protected]
tyler26: [email protected]
Choadmeyer [email protected]
infamousdutch: [email protected]
hey, I bidded for 4.
Updating my bid to [email protected]
Mr Teal, can you show who is in the lead with bidding?
mwax321: [email protected]Dorpsgek: [email protected]
ipextreme: [email protected]
villex: [email protected]
nuffsaid420: [email protected]
markj113: [email protected]
tyler26: [email protected]
Choadmeyer [email protected]
nexus99: [email protected]
infamousdutch: [email protected]
wirabhumi: [email protected]
Auction ends in a hair over 6 hours.
1 @ 1.06
1 @ 1.06
4 @ 1.06
1 @ 1.04 (REVISED)
4 @ 1.04
1@ 1.03
Mr Teal, can you show who is in the lead with bidding?
nuffsaid420: [email protected]markj113: [email protected]
tyler26: [email protected]
infamousdutch: [email protected]
wirabhumi: [email protected]
ipextreme: [email protected]
markE08: [email protected]
bruiser: [email protected]
Mr teal how many Asic chips are there on the board
Hi guyver. The board comes with 8 ASICs mounted.thanks for the reply how much would shipping to the uk be
Mr teal how many Asic chips are there on the board
Hi guyver. The board comes with 8 ASICs mounted.thanks for the reply how much would shipping to the uk be
Mr teal how many Asic chips are there on the board
Hi guyver. The board comes with 8 ASICs mounted.
Mr Teal, can you show who is in the lead with bidding?
Mr teal how many Asic chips are there on the board
1 @ 1.03
1 @1.03
1 @ 1.02 (raised)
1 @ 1.02
1 @ 1.03
I'll rise it, bro..
5 @ 1.02
5 @ 1.02
Current High Bidders
infamousdutch: [email protected]
bruiser: [email protected]
Fireblade: [email protected]
MarkE08: [email protected]
tyler26 and wirabhumi, all 17 were bid on at 1.01 before your bids, so you're not currently active.
infamousdutch: [email protected]
bruiser: [email protected]
Fireblade: [email protected]
MarkE08: [email protected]
tyler26 and wirabhumi, all 17 were bid on at 1.01 before your bids, so you're not currently active.
4 @1.01
2 @ 1.02
1 @ 1.01
2 @ 1.01
For clearance: There comes without the asics?
that's what they are, yes.
is "bobsag" a shill bidder? that can't be for real, right?
i'll offer the lowest of USD $400 or 1 bitcoin for two of them, based on the price of BTC when auction ends on Monday
12 @ 1.01
is "bobsag" a shill bidder? that can't be for real, right?
No, from what I know, he runs hosting and quite a few group buys. It's a legit bid AFAIK.
For clearance: There comes without the asics?
No, there boards are fully populated and come with the ASICs. Place a heatsink and plug them in, and they're ready to go. 
For clearance: There comes without the asics?
that's what they are, yes.
is "bobsag" a shill bidder? that can't be for real, right?
i'll offer the lowest of USD $400 or 1 bitcoin for two of them, based on the price of BTC when auction ends on Monday
For clearance: There comes without the asics?
17 @1
do these come with the nice heatsink and fan?
No, that's part of our test and verification setup.Do you recommend that setup and provide the part/vendor of the fan itself?
[email protected]
I've posted it a couple times in the Chili thread, but it's extremely hard to beat the value of the clearance Antec Kuhler Shelf
My cooling setup uses two of them (one as a backplate/VRM fan) cost a hair over $25, and it works stellar. The bottom one keeps the ASICs pressed nice and tight against the actual heatsink, and makes a great stand to hold the board up.
do these come with the nice heatsink and fan?
No, that's part of our test and verification setup.Do you recommend that setup and provide the part/vendor of the fan itself?
[email protected]
do these come with the nice heatsink and fan?
No, that's part of our test and verification setup. 
do these come with the nice heatsink and fan?
I'll start us off!
17 @ 0.5BTC
17 @ 0.5BTC
In our final run of Chili boards we had some excess stock of PCBs, so we teamed up with CanaryInTheMine to provide the BFL ASICs needed to finish those boards with the intent to auction them off.
See the Chili thread itself for more details on the boards.
We now have 17 boards that will be sold.
(Images from Batch 1, but are representative)
Nominally 30GH/s, most users are reporting in the vicinity of 35GH/s with their units if properly cooled.
Bidding Format
Minimum Bid is 0.5BTC
Place bids in the format Number@Price (IE, 3 units @ 2.0BTC)
End Time
This auction ends Monday Nov 18th, 2013 at 23:59 (11:59 pm) GMT, 18:59 EST, 15:59 PST
Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.
See the Chili thread itself for more details on the boards.
We now have 17 boards that will be sold.
(Images from Batch 1, but are representative)
Nominally 30GH/s, most users are reporting in the vicinity of 35GH/s with their units if properly cooled.
Bidding Format
Minimum Bid is 0.5BTC
Place bids in the format Number@Price (IE, 3 units @ 2.0BTC)
End Time
This auction ends Monday Nov 18th, 2013 at 23:59 (11:59 pm) GMT, 18:59 EST, 15:59 PST
Shipping
Shipping will take place Tuesday, Nov 19th.
Shipping within the US is included. International shipping will be at the buyer's expense and will go FedEx.
Jump to: