Topic: New Bitmain Firmware for S4+ Fixed some issues, S4+-2015051 (Read 917 times)
My S4+ is also downclocked at 175 and so far I did not have any issues. It is stable at 2.2 TH/s and with much lower temps than on stock settings.
I have 3 miner, working on the standard firmware there are no problems
1) 200=2,631.43 (0.0001%) Temp 69-70
2) 212.5=2,771.27 (0.0021%) Temp 72-74
3) 225=2,981.41(0.0053%) Temp 74-76
1) 200=2,631.43 (0.0001%) Temp 69-70
2) 212.5=2,771.27 (0.0021%) Temp 72-74
3) 225=2,981.41(0.0053%) Temp 74-76
I've got an S4+, I've seen a few weird behaviors on it, what does this fix?
Not sure 100% I just know this is what bitmain emailed me with, when i reported the machine went crash after down clocking it, and the fact it was failing to shutdown after going past 80c (the temperature stated for shutdown in the gui)
Fuck that's not good!
I've got an S4+, I've seen a few weird behaviors on it, what does this fix?
From Bitmain (Hosted on Google drive)
Hi,
Thanks for the info.
May you upgrade the firmware to try?
https://drive.google.com/open?id=0B9vRdgCJFqmkeTNvQ3JzTGpxUXc&authuser=0
It should show 95C after you upgrade it.
In My Drop Box:
https://www.dropbox.com/s/7l94nj0cltha7y6/SD-S4%2B-20150518.tar.gz?dl=0
Hi,
Thanks for the info.
May you upgrade the firmware to try?
https://drive.google.com/open?id=0B9vRdgCJFqmkeTNvQ3JzTGpxUXc&authuser=0
It should show 95C after you upgrade it.
In My Drop Box:
https://www.dropbox.com/s/7l94nj0cltha7y6/SD-S4%2B-20150518.tar.gz?dl=0
Jump to: