Author

Topic: New Power Supplies and X-11 Breakout Board (Remotely Power Cycle Rigs) from PM (Read 151 times)

hero member
Activity: 630
Merit: 502
Is this compatible with HP Platinum 1200W?
member
Activity: 504
Merit: 71
Just Getting Started...
On the dual 750 PS kit, will you be able to use the remote management? Also can you provide instructions for adapting this to a GPU rig? I *think* it's pretty straightforward, but I'd like to be 100% sure.
newbie
Activity: 51
Merit: 0
What’s up everyone? Thought I would share some links with you guys on some new products from Parallel Miner. The breakout board is particularly interesting as you can daisy chain several PSUs together (server PSUs and/or consumer ATX PSUs) without the need for an additional ATX adapter cable. Also, in the near future (early February) you can install another module in the breakout board that will enable you to remotely power cycle your rigs. This is super relevant for anyone trying to maintain rigs offsite. These kits are great because they ship with all of the necessary cables.

Everyone remembers how fast these sell out - so act quickly if you want to grab some.

1400W 94% Platinum (200-240v) PSU Kit - $209-$229  (97 Left In-Stock)

https://i.imgur.com/487UZTD.jpg

Kit Includes:
(1x) Original Delta 1400watt Server power supply 200-240v ONLY. Platinum Rated.
(8, 10, 12 or 16x) Pair 6-pin to 6-pin +2pin 16AWG THHN PCIE cables
(1x) Rev: 11 X-Adapter tested
(4x) 3M Rubber foot pads


1500W 80% Gold (110-240v) PSU Kit - $159  (83 Left In-Stock)
This kit was made for Antminers but can easily be used for GPU mining.

https://i.imgur.com/58rpjeu.jpg

Kit Includes:
(2x) Original HP server power supply. (2) 750W 80+ Gold 110-240v
(10x) Pair 16AWG THHN PCIE cables
(2x) Rev:11 X-Adapter
(2x) 4-pin to Molex Fault protection cables
(8x) 3M Rubber foot pads


750W 94% Platinum (100-240v) PSU Kit - $79 (35 Left In-Stock)

https://i.imgur.com/2vzKgm9.jpg

Kit Includes:

(1x) Original HP server power supply. Platinum High Efficiency 750 watt 100-240V
(8x) Pair 6-pin to 8-pin(6+2) 16AWG THHN PCIE cables
(1x) Rev:7 X-Adapter tested
(4x) 3M Rubber foot pads


X11 Breakout Board (Stand-Alone) - $55 (88 Left In-Stock)

https://i.imgur.com/khqdw1P.jpg

Happy Mining!
Jump to: