Topic: New S19, trying to connect to a pool (Read 96 times)
Posting the kernel log alone might not show where the problem is, you need to post a screenshot of your configuration page and status page, my guess is that you are making a typo somewhere in the pool/worker configuration. if that isn't the case - it could be your router/ISP blocking the connection to the pool, things would be clear once you post all the information needed to troubleshoot this issue.
New Antminer owner here and having trouble connecting to a pool. Everything seems to be working fine, all chips are green the only sign I can see is the red abnormal connection. The machine ramps up and kicks into high fan mode, then it shuts down a few seconds later. It completes that process 2 times and then just runs on low fan mode and does not connect. It seems to be a connectivity issue but I'm not sure. Any information regarding this matter would be greatly appreciated.
I am asking this to be moved to mining help section
https://bitcointalk.org/index.php?board=40.0
In the mean time send us your logs
Code:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #7 SMP Wed Aug 25 17:32:48 CST 2021
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768
[ 0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc053f674 (5342 kB)
[ 0.000000] .init : 0xc0540000 - 0xc0571680 ( 198 kB)
[ 0.000000] .data : 0xc0572000 - 0xc05d9ee0 ( 416 kB)
[ 0.000000] .bss : 0xc05d9ee0 - 0xc0630448 ( 346 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
note I snipped it
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13+ (jenkins@nomd-nomd-fwc-bj) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #7 SMP Wed Aug 25 17:32:48 CST 2021
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c05d9000, node_mem_map c0631000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c083e000 s9856 r8192 d14720 u32768
[ 0.000000] pcpu-alloc: s9856 r8192 d14720 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 245448k/245448k available, 16696k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc053f674 (5342 kB)
[ 0.000000] .init : 0xc0540000 - 0xc0571680 ( 198 kB)
[ 0.000000] .data : 0xc0572000 - 0xc05d9ee0 ( 416 kB)
[ 0.000000] .bss : 0xc05d9ee0 - 0xc0630448 ( 346 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
note I snipped it
I placed a lot into code if we can see logs we can tell issues.
Also is the speed set to normal or low or sleep
if sleep it will not mine
Can you tell us what pool you mine? The pool you are trying to connect to may be unstable or maybe your ISP/router blocking your miner to connect to that pool.
I have a few steps that you can try.
1. Try to mine on other pools like Viabtc/ckpool solo then test.
2. If the first step does not work try to change your miner's DNS to Google/Cloudflare DNS then test.
3. Replug or replace the Ethernet cable
4. The last step share your kernel logs as suggested above and let us troubleshoot the issue.
I have a few steps that you can try.
1. Try to mine on other pools like Viabtc/ckpool solo then test.
2. If the first step does not work try to change your miner's DNS to Google/Cloudflare DNS then test.
3. Replug or replace the Ethernet cable
4. The last step share your kernel logs as suggested above and let us troubleshoot the issue.
New Antminer owner here and having trouble connecting to a pool. Everything seems to be working fine, all chips are green the only sign I can see is the red abnormal connection. The machine ramps up and kicks into high fan mode, then it shuts down a few seconds later. It completes that process 2 times and then just runs on low fan mode and does not connect. It seems to be a connectivity issue but I'm not sure. Any information regarding this matter would be greatly appreciated.
You should post this in the Mining section of the forum, more members interested by ASICs will be able to help you.
Otherwise, you'll have to give us your kernel log, because without the log we won't be able to help you to identify the source of your issue.
You can use the forum's "insert code" button when you paste your kernel log, which will be easier to read.
New Antminer owner here and having trouble connecting to a pool. Everything seems to be working fine, all chips are green the only sign I can see is the red abnormal connection. The machine ramps up and kicks into high fan mode, then it shuts down a few seconds later. It completes that process 2 times and then just runs on low fan mode and does not connect. It seems to be a connectivity issue but I'm not sure. Any information regarding this matter would be greatly appreciated.
Jump to: