Topic: New t17e - not hash (Read 458 times)
I guess the next step is to confirm the serial numbers of the control board and each of the hashboars. Depending on the scheme bitmain used to label this machine, all the serial numbers should be identical or identical except for a few characters in the first third of the serial number indicating the type of item it is attached to example xxxxc47xxxxxxxxxx = C47 ctrl board. This will eliminate the question as to whether your machine is mixed and narrow down your next steps.
Hey can u elaborate what I need and what should i do? seems i have simialr problem, i mixed hashbaords together and now they shows 0asics all 3 chains.
tornado_blade's point is valid, but not expressed perfectly, the error in the kernel log could be the result of a mix and match of hash boards, but it's not always the case, especially given that OP mentioned the miner is brand new, so to be an EEPROM issue is just unlikely.
For your case however and since you know your boards are good and this started after mixing them, then you have two options.
1- Get a tool that allows you to change the EEPROM code, like this one > https://www.zeusbtc.com/MinerDetails.asp?ID=236
2- Use custom firmware like Vnish which ignores the EEPROM altogether.
The reason why you can't mix and match these boards is because they come pre-loaded with voltage settings (and maybe a few more things), the official firmware will check to see if they all match, if not, you get into an issue, so using the tool above or anything else that does the same thing, you can just copy the settings from one hash board and paste it on all other hash boards, that way the official firmware will think they are the same and will work just fine.
The "cheaper" method (but you have to pay firmware fees) is to use custom firmware like Vnish which ignores all that and lets you mix and match hash boards, which option is better? I don't know, it's 2-3% of your revenue is $200 paid once.
Hi
this error means ur hash boards from different miners or one or two or three of them repaired and u need code editor to read code from one of them and write to other two hash boards to match them together
this error means ur hash boards from different miners or one or two or three of them repaired and u need code editor to read code from one of them and write to other two hash boards to match them together
Hey can u elaborate what I need and what should i do? seems i have simialr problem, i mixed hashbaords together and now they shows 0asics all 3 chains.
Hi
this error means ur hash boards from different miners or one or two or three of them repaired and u need code editor to read code from one of them and write to other two hash boards to match them together
this error means ur hash boards from different miners or one or two or three of them repaired and u need code editor to read code from one of them and write to other two hash boards to match them together
Not a fan of the 17e I have two.
Try power off wait 1 minute power on..
Check your volts in 2 lines of 230 volts and they need to have 14 or 15 amps as the 17e is a freaking power hog.
you can supply power lower then 230 around 205 and up to 240.
make sure your have enough amps.
about 16 amps at 205 volts
and about 14 amps at 240 volts.
switch power cables with a known good set of power cables.
Try power off wait 1 minute power on..
Check your volts in 2 lines of 230 volts and they need to have 14 or 15 amps as the 17e is a freaking power hog.
you can supply power lower then 230 around 205 and up to 240.
make sure your have enough amps.
about 16 amps at 205 volts
and about 14 amps at 240 volts.
switch power cables with a known good set of power cables.
Guide to reset: Run the miner at least 10 minutes then hold reset/IP reporter button for 15 seconds then release.
You can't reset the miner using the IP reporter button this way, that is simply just forcing the miner to request another IP address from the DHCP table in case the miner does not show on the network, it will not reset the miner.
the IP report button can be used as a reset method if it is pressed before the miner is turned on, without letting go of it, turn the miner on until the lights blink and then let go, that worked very well on old mining gears like S9, as for the T17e that easiest and safest way would be to simply use the reset button, also, the 10 minutes thing is not important, I have done a dozen of reset and never waited that long before hitting the reset button, and never had an issue.
Additional to the above post it might also a control board failure.
Much better check the miners status in WebGUI and make a screenshot then post it here. It will help us to find the issue check the below post and if you found one of this in the WebGUI you have a control board failure.
Control board failure:
Did you already try to hard reset the miner? It might fix your issue so try it first before you touch the hardware.
Guide to reset: Run the miner at least 10 minutes then hold reset/IP reporter button for 15 seconds then release.
Let see if it fix your issue but if not you might need to test your miner with different PSU like suggested above.
Much better check the miners status in WebGUI and make a screenshot then post it here. It will help us to find the issue check the below post and if you found one of this in the WebGUI you have a control board failure.
Control board failure:
- All hash boards show zero hash rate (this can also be a hash board failure)
- One or more hash boards do not appear in the Miner status screen
- The Miner overview screen shows the error "Socket connection failed"
- The Miner overview screen shows no values for BMMiner version and/or Hardware version
- One or more hash boards do not appear in the Miner status screen
- The Miner overview screen shows the error "Socket connection failed"
- The Miner overview screen shows no values for BMMiner version and/or Hardware version
Did you already try to hard reset the miner? It might fix your issue so try it first before you touch the hardware.
Guide to reset: Run the miner at least 10 minutes then hold reset/IP reporter button for 15 seconds then release.
Let see if it fix your issue but if not you might need to test your miner with different PSU like suggested above.
The kernel log states the following.
also this
and this
in plain English, the kernel log is suggesting that all 3 hash boards on your miner are burnt and have 0 asics, but that does not make sense since the miner is new as the tittle suggests, which makes me think that this is a power supply unit issue. Have you plugged the miner in anything that's above 240v or below 200v?
The reasons why I think the PSU has got to be the problem, is based on the fact that these gears are known to have problems with PSU,and because I assume the boards are new and the chances of all 3 boards having 0 asic are slim to nothing, so the only logical thing left to think of is the PSU not being able to power the hash boards so they show 0 asics.
The above assumes you have done the simple troubleshooting, such as trying a different pool, a different Ethernet cable, checked all cables, PSU's fans,miner's fans and so on.
Code:
2020-01-06 18:25:42:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
also this
Code:
2020-01-06 18:25:10:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
and this
Code:
2020-01-06 18:24:38:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
in plain English, the kernel log is suggesting that all 3 hash boards on your miner are burnt and have 0 asics, but that does not make sense since the miner is new as the tittle suggests, which makes me think that this is a power supply unit issue. Have you plugged the miner in anything that's above 240v or below 200v?
The reasons why I think the PSU has got to be the problem, is based on the fact that these gears are known to have problems with PSU,and because I assume the boards are new and the chances of all 3 boards having 0 asic are slim to nothing, so the only logical thing left to think of is the PSU not being able to power the hash boards so they show 0 asics.
The above assumes you have done the simple troubleshooting, such as trying a different pool, a different Ethernet cable, checked all cables, PSU's fans,miner's fans and so on.
Hello all.
needs yr help in this case.
i have no idea
needs yr help in this case.
i have no idea
Code:
2020-01-06 18:25:55:driver-btm-api.c:901:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2020-01-06 18:25:56:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT
2020-01-06 18:25:56:driver-btm-api.c:132:stop_mining: stop mining: soc init failed!
2020-01-06 18:25:56:thread.c:764:cancel_read_nonce_reg_thread: cancel thread
2020-01-06 18:25:56:driver-btm-api.c:117:killall_hashboard: ****power off hashboard****
2020-01-06 18:25:56:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT
2020-01-06 18:25:56:driver-btm-api.c:132:stop_mining: stop mining: soc init failed!
2020-01-06 18:25:56:thread.c:764:cancel_read_nonce_reg_thread: cancel thread
2020-01-06 18:25:56:driver-btm-api.c:117:killall_hashboard: ****power off hashboard****
Code:
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 2971759534
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F7881EBB-2758-4606-B9D9-7F3EEAB37253, small LPT model
ubi1: attaching mtd5
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_ec_hdr+0x68/0x1cc)
[] (ubi_io_read_ec_hdr) from [] (ubi_attach+0x130/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (ubi_attach+0x1ec/0x1194)
[] (ubi_attach) from [] (ubi_attach_mtd_dev+0x62c/0xaf8)
[] (ubi_attach_mtd_dev) from [] (ctrl_cdev_ioctl+0xf0/0x1ec)
[] (ctrl_cdev_ioctl) from [] (vfs_ioctl+0x20/0x34)
[] (vfs_ioctl) from [] (do_vfs_ioctl+0x7d8/0x8b0)
[] (do_vfs_ioctl) from [] (SyS_ioctl+0x34/0x5c)
[] (SyS_ioctl) from [] (ret_fast_syscall+0x0/0x3c)
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 865/151, WL threshold: 4096, image sequence number: 1857823607
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B08F051B-2357-4CFE-957E-608EF71E3E17, small LPT model
ubi1: scrubbed PEB 479 (LEB 0:327), data moved to PEB 14
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[] (show_stack) from [] (dump_stack+0x84/0xa4)
[] (dump_stack) from [] (ubi_io_read+0x1d4/0x2a8)
[] (ubi_io_read) from [] (ubi_io_read_vid_hdr+0x6c/0x1d8)
[] (ubi_io_read_vid_hdr) from [] (wear_leveling_worker+0x1e0/0x6a0)
[] (wear_leveling_worker) from [] (do_work+0xcc/0x100)
[] (do_work) from [] (ubi_thread+0x100/0x190)
[] (ubi_thread) from [] (kthread+0xdc/0xf0)
[] (kthread) from [] (ret_from_fork+0x14/0x3c)
ubi1: scrubbed PEB 777 (LEB 0:947), data moved to PEB 902
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-01-06 18:23:11:driver-btm-api.c:536:init_freq_mode: This is scan-user version
2020-01-06 18:23:11:driver-btm-api.c:1850:bitmain_soc_init: Miner compile time: Wed Nov 20 19:29:06 CST 2019 type: Antminer T17e
2020-01-06 18:23:11:driver-btm-api.c:1851:bitmain_soc_init: commit version: fe37dcc 2019-11-20 19:23:24, build by: lol 2019-11-20 19:38:45
2020-01-06 18:23:11:driver-btm-api.c:1852:bitmain_soc_init: opt_multi_version = 1
2020-01-06 18:23:11:driver-btm-api.c:1853:bitmain_soc_init: opt_bitmain_ab = 1
2020-01-06 18:23:11:driver-btm-api.c:1854:bitmain_soc_init: mid_auto_gen = 0
2020-01-06 18:23:11:driver-btm-api.c:1855:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-01-06 18:23:11:driver-btm-api.c:1669:show_sn: no SN got, please write SN to /nvdata/sn
2020-01-06 18:23:11:fan.c:248:front_fan_power_on: Note: front fan is power on!
2020-01-06 18:23:11:fan.c:260:rear_fan_power_on: Note: rear fan is power on!
2020-01-06 18:23:11:driver-btm-api.c:1006:miner_device_init: Detect 256MB control board of XILINX
2020-01-06 18:23:11:driver-btm-api.c:947:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-01-06 18:23:17:driver-btm-api.c:931:init_miner_version: miner ID : 805c150618c0885c
2020-01-06 18:23:17:driver-btm-api.c:937:init_miner_version: FPGA Version = 0xB023
2020-01-06 18:23:19 [chain 0]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 4B 50 33 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A AD 34 96 13 7A 7A 74 74 7A 7A
0x0030 7A 74 74 7A 7A 7A 74 7A 7A 74 7A 7A 74 7A 7A 7A
0x0040 74 7A 74 74 7A 7A 7A 7A 74 7A 7A 7A 74 7A 7A 7A
0x0050 7A 74 7A 74 7A 74 7A 74 7A 7A 74 7A 74 7A 7A 7A
0x0060 74 7A 7A 74 7A 7A 74 7A 7A 74 7A 7A 7A 74 7A 7A
0x0070 74 7A 7A 74 7A 7A 74 7A 30 07 D7 45 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 81 4B
2020-01-06 18:23:19 fixture_header : 0x1396
2020-01-06 18:23:19 fixture_version : 0x0001
2020-01-06 18:23:19 hash_board_sn : YDFTYH9AIAABB1KP3
2020-01-06 18:23:19 pcb_version : 0x010a
2020-01-06 18:23:19 bom_version : 0x0100
2020-01-06 18:23:19 product_id : 0x01
2020-01-06 18:23:19 board_bin : 0x01
2020-01-06 18:23:19 chip_ft : A4V4
2020-01-06 18:23:19 chip_bin : BIN3
2020-01-06 18:23:19 chip_version : AB
2020-01-06 18:23:19
2020-01-06 18:23:19 miner_header : 0x1396
2020-01-06 18:23:19 work_mode_count : 0x01
2020-01-06 18:23:19 miner_bin : 0x00
2020-01-06 18:23:19 [mode 0]
2020-01-06 18:23:19 voltage : 1840
2020-01-06 18:23:19 ideal_hash_rate : 17879
IC[000]:610 IC[001]:610 IC[002]:580 IC[003]:580 IC[004]:610 IC[005]:610
IC[006]:610 IC[007]:580 IC[008]:580 IC[009]:610 IC[010]:610 IC[011]:610
IC[012]:580 IC[013]:610 IC[014]:610 IC[015]:580 IC[016]:610 IC[017]:610
IC[018]:580 IC[019]:610 IC[020]:610 IC[021]:610 IC[022]:580 IC[023]:610
IC[024]:580 IC[025]:580 IC[026]:610 IC[027]:610 IC[028]:610 IC[029]:610
IC[030]:580 IC[031]:610 IC[032]:610 IC[033]:610 IC[034]:580 IC[035]:610
IC[036]:610 IC[037]:610 IC[038]:610 IC[039]:580 IC[040]:610 IC[041]:580
IC[042]:610 IC[043]:580 IC[044]:610 IC[045]:580 IC[046]:610 IC[047]:610
IC[048]:580 IC[049]:610 IC[050]:580 IC[051]:610 IC[052]:610 IC[053]:610
IC[054]:580 IC[055]:610 IC[056]:610 IC[057]:580 IC[058]:610 IC[059]:610
IC[060]:580 IC[061]:610 IC[062]:610 IC[063]:580 IC[064]:610 IC[065]:610
IC[066]:610 IC[067]:580 IC[068]:610 IC[069]:610 IC[070]:580 IC[071]:610
IC[072]:610 IC[073]:580 IC[074]:610 IC[075]:610 IC[076]:580 IC[077]:610
2020-01-06 18:23:21 [chain 1]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 4B 54 4C 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A 75 C8 96 13 7C 7C 7C 7C 7C 7C
0x0030 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0040 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0050 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0060 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0070 7C 7C 7C 7C 7C 7C 7C 7C 30 07 2E 48 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF F5 DF
2020-01-06 18:23:22 fixture_header : 0x1396
2020-01-06 18:23:22 fixture_version : 0x0001
2020-01-06 18:23:22 hash_board_sn : YDFTYH9AIAABB1KTL
2020-01-06 18:23:22 pcb_version : 0x010a
2020-01-06 18:23:22 bom_version : 0x0100
2020-01-06 18:23:22 product_id : 0x01
2020-01-06 18:23:22 board_bin : 0x01
2020-01-06 18:23:22 chip_ft : A4V4
2020-01-06 18:23:22 chip_bin : BIN3
2020-01-06 18:23:22 chip_version : AB
2020-01-06 18:23:22
2020-01-06 18:23:22 miner_header : 0x1396
2020-01-06 18:23:22 work_mode_count : 0x01
2020-01-06 18:23:22 miner_bin : 0x00
2020-01-06 18:23:22 [mode 0]
2020-01-06 18:23:22 voltage : 1840
2020-01-06 18:23:22 ideal_hash_rate : 18478
IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:620 IC[005]:620
IC[006]:620 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:620 IC[011]:620
IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:620 IC[017]:620
IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:620 IC[022]:620 IC[023]:620
IC[024]:620 IC[025]:620 IC[026]:620 IC[027]:620 IC[028]:620 IC[029]:620
IC[030]:620 IC[031]:620 IC[032]:620 IC[033]:620 IC[034]:620 IC[035]:620
IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:620 IC[040]:620 IC[041]:620
IC[042]:620 IC[043]:620 IC[044]:620 IC[045]:620 IC[046]:620 IC[047]:620
IC[048]:620 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:620 IC[053]:620
IC[054]:620 IC[055]:620 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620
IC[060]:620 IC[061]:620 IC[062]:620 IC[063]:620 IC[064]:620 IC[065]:620
IC[066]:620 IC[067]:620 IC[068]:620 IC[069]:620 IC[070]:620 IC[071]:620
IC[072]:620 IC[073]:620 IC[074]:620 IC[075]:620 IC[076]:620 IC[077]:620
2020-01-06 18:23:23 [chain 2]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 4C 34 32 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A 26 47 96 13 7C 7C 7C 7C 76 76
0x0030 76 7C 7C 7C 76 7C 7C 7C 7C 7C 76 76 7C 7C 7C 76
0x0040 7C 76 7C 7C 76 76 7C 7C 7C 7C 76 7C 76 7C 7C 7C
0x0050 7C 76 76 7C 7C 7C 76 76 7C 7C 76 7C 7C 7C 76 7C
0x0060 76 76 7C 7C 7C 7C 76 7C 7C 76 7C 7C 76 7C 7C 76
0x0070 7C 7C 7C 7C 76 76 7C 7C 30 07 FD 46 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 75 F3
2020-01-06 18:23:24 fixture_header : 0x1396
2020-01-06 18:23:24 fixture_version : 0x0001
2020-01-06 18:23:24 hash_board_sn : YDFTYH9AIAABB1L42
2020-01-06 18:23:24 pcb_version : 0x010a
2020-01-06 18:23:24 bom_version : 0x0100
2020-01-06 18:23:24 product_id : 0x01
2020-01-06 18:23:24 board_bin : 0x01
2020-01-06 18:23:24 chip_ft : A4V4
2020-01-06 18:23:24 chip_bin : BIN3
2020-01-06 18:23:24 chip_version : AB
2020-01-06 18:23:24
2020-01-06 18:23:24 miner_header : 0x1396
2020-01-06 18:23:24 work_mode_count : 0x01
2020-01-06 18:23:24 miner_bin : 0x00
2020-01-06 18:23:24 [mode 0]
2020-01-06 18:23:24 voltage : 1840
2020-01-06 18:23:24 ideal_hash_rate : 18173
IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:590 IC[005]:590
IC[006]:590 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:590 IC[011]:620
IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:590 IC[017]:590
IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:590 IC[022]:620 IC[023]:590
IC[024]:620 IC[025]:620 IC[026]:590 IC[027]:590 IC[028]:620 IC[029]:620
IC[030]:620 IC[031]:620 IC[032]:590 IC[033]:620 IC[034]:590 IC[035]:620
IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:590 IC[040]:590 IC[041]:620
IC[042]:620 IC[043]:620 IC[044]:590 IC[045]:590 IC[046]:620 IC[047]:620
IC[048]:590 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:590 IC[053]:620
IC[054]:590 IC[055]:590 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620
IC[060]:590 IC[061]:620 IC[062]:620 IC[063]:590 IC[064]:620 IC[065]:620
IC[066]:590 IC[067]:620 IC[068]:620 IC[069]:590 IC[070]:620 IC[071]:620
IC[072]:620 IC[073]:620 IC[074]:590 IC[075]:590 IC[076]:620 IC[077]:620
2020-01-06 18:23:24:thread.c:719:create_read_nonce_reg_thread: create thread
2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[0] = 1
2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[1] = 1
2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[2] = 1
2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-01-06 18:23:28:driver-btm-api.c:1803:bitmain_board_init: Fan check passed.
2020-01-06 18:23:29:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:23:31:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:23:32:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:23:34:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:23:35:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:23:37:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:23:37:thread.c:714:create_pic_heart_beat_thread: create thread
2020-01-06 18:23:39:power_api.c:238:power_init: power type version: 0x0042
2020-01-06 18:23:39:power_api.c:256:power_init: Power init:
2020-01-06 18:23:39:power_api.c:257:power_init: current_voltage_raw = 0
2020-01-06 18:23:39:power_api.c:258:power_init: highest_voltage_raw = 2000
2020-01-06 18:23:39:power_api.c:259:power_init: working_voltage_raw = 1800
2020-01-06 18:23:39:power_api.c:260:power_init: higher_voltage_raw = 1850
2020-01-06 18:23:39:power_api.c:261:power_init: check_asic_voltage_raw = 1800
2020-01-06 18:23:39:driver-btm-api.c:1813:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-01-06 18:23:39:power_api.c:226:power_off: init gpio907
2020-01-06 18:24:11:power_api.c:313:set_to_check_asic_voltage: Set to voltage raw 1800, one step.
2020-01-06 18:24:21:uart.c:69:set_baud: set UART baud to 115200
2020-01-06 18:24:28:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2020-01-06 18:24:29:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:24:31:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:24:38:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2020-01-06 18:24:39:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:24:41:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:24:48:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2020-01-06 18:24:49:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:24:51:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:24:51:driver-btm-api.c:901:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2020-01-06 18:25:00:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-01-06 18:25:01:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:25:03:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:25:10:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2020-01-06 18:25:11:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:25:13:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:25:20:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2020-01-06 18:25:22:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:25:24:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:25:24:driver-btm-api.c:901:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2020-01-06 18:25:32:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2020-01-06 18:25:33:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:25:35:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:25:42:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2020-01-06 18:25:43:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:25:45:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:25:52:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2020-01-06 18:25:53:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:25:55:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:25:55:driver-btm-api.c:901:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2020-01-06 18:25:56:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT
2020-01-06 18:25:56:driver-btm-api.c:132:stop_mining: stop mining: soc init failed!
2020-01-06 18:25:56:thread.c:764:cancel_read_nonce_reg_thread: cancel thread
2020-01-06 18:25:56:driver-btm-api.c:117:killall_hashboard: ****power off hashboard****
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
nand: Macronix MX30LF2GE8AB
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: bad block at 0x00000ff60000
nand_read_bbt: bad block at 0x00000ff80000
nand_read_bbt: bad block at 0x00000ffa0000
nand_read_bbt: bad block at 0x00000ffc0000
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi0: VID header offset: 512 (aligned 512), data offset: 2048
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 2971759534
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F7881EBB-2758-4606-B9D9-7F3EEAB37253, small LPT model
ubi1: attaching mtd5
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[
[
[
[
[
[
[
[
[
[
[
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[
[
[
[
[
[
[
[
[
[
[
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read 64 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[
[
[
[
[
[
[
[
[
[
[
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read 512 bytes
CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[
[
[
[
[
[
[
[
[
[
[
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512
ubi1: VID header offset: 512 (aligned 512), data offset: 2048
ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 865/151, WL threshold: 4096, image sequence number: 1857823607
ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35
ubi1: background thread "ubi_bgt1d" started, PID 720
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[
[
[
[
[
[
[
[
[
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B08F051B-2357-4CFE-957E-608EF71E3E17, small LPT model
ubi1: scrubbed PEB 479 (LEB 0:327), data moved to PEB 14
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry
ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read 512 bytes
CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25
Hardware name: Xilinx Zynq Platform
[
[
[
[
[
[
[
[
[
ubi1: scrubbed PEB 777 (LEB 0:947), data moved to PEB 902
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb40000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-01-06 18:23:11:driver-btm-api.c:536:init_freq_mode: This is scan-user version
2020-01-06 18:23:11:driver-btm-api.c:1850:bitmain_soc_init: Miner compile time: Wed Nov 20 19:29:06 CST 2019 type: Antminer T17e
2020-01-06 18:23:11:driver-btm-api.c:1851:bitmain_soc_init: commit version: fe37dcc 2019-11-20 19:23:24, build by: lol 2019-11-20 19:38:45
2020-01-06 18:23:11:driver-btm-api.c:1852:bitmain_soc_init: opt_multi_version = 1
2020-01-06 18:23:11:driver-btm-api.c:1853:bitmain_soc_init: opt_bitmain_ab = 1
2020-01-06 18:23:11:driver-btm-api.c:1854:bitmain_soc_init: mid_auto_gen = 0
2020-01-06 18:23:11:driver-btm-api.c:1855:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-01-06 18:23:11:driver-btm-api.c:1669:show_sn: no SN got, please write SN to /nvdata/sn
2020-01-06 18:23:11:fan.c:248:front_fan_power_on: Note: front fan is power on!
2020-01-06 18:23:11:fan.c:260:rear_fan_power_on: Note: rear fan is power on!
2020-01-06 18:23:11:driver-btm-api.c:1006:miner_device_init: Detect 256MB control board of XILINX
2020-01-06 18:23:11:driver-btm-api.c:947:init_fan_parameter: fan_eft : 0 fan_pwm : 0
2020-01-06 18:23:17:driver-btm-api.c:931:init_miner_version: miner ID : 805c150618c0885c
2020-01-06 18:23:17:driver-btm-api.c:937:init_miner_version: FPGA Version = 0xB023
2020-01-06 18:23:19 [chain 0]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 4B 50 33 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A AD 34 96 13 7A 7A 74 74 7A 7A
0x0030 7A 74 74 7A 7A 7A 74 7A 7A 74 7A 7A 74 7A 7A 7A
0x0040 74 7A 74 74 7A 7A 7A 7A 74 7A 7A 7A 74 7A 7A 7A
0x0050 7A 74 7A 74 7A 74 7A 74 7A 7A 74 7A 74 7A 7A 7A
0x0060 74 7A 7A 74 7A 7A 74 7A 7A 74 7A 7A 7A 74 7A 7A
0x0070 74 7A 7A 74 7A 7A 74 7A 30 07 D7 45 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 81 4B
2020-01-06 18:23:19 fixture_header : 0x1396
2020-01-06 18:23:19 fixture_version : 0x0001
2020-01-06 18:23:19 hash_board_sn : YDFTYH9AIAABB1KP3
2020-01-06 18:23:19 pcb_version : 0x010a
2020-01-06 18:23:19 bom_version : 0x0100
2020-01-06 18:23:19 product_id : 0x01
2020-01-06 18:23:19 board_bin : 0x01
2020-01-06 18:23:19 chip_ft : A4V4
2020-01-06 18:23:19 chip_bin : BIN3
2020-01-06 18:23:19 chip_version : AB
2020-01-06 18:23:19
2020-01-06 18:23:19 miner_header : 0x1396
2020-01-06 18:23:19 work_mode_count : 0x01
2020-01-06 18:23:19 miner_bin : 0x00
2020-01-06 18:23:19 [mode 0]
2020-01-06 18:23:19 voltage : 1840
2020-01-06 18:23:19 ideal_hash_rate : 17879
IC[000]:610 IC[001]:610 IC[002]:580 IC[003]:580 IC[004]:610 IC[005]:610
IC[006]:610 IC[007]:580 IC[008]:580 IC[009]:610 IC[010]:610 IC[011]:610
IC[012]:580 IC[013]:610 IC[014]:610 IC[015]:580 IC[016]:610 IC[017]:610
IC[018]:580 IC[019]:610 IC[020]:610 IC[021]:610 IC[022]:580 IC[023]:610
IC[024]:580 IC[025]:580 IC[026]:610 IC[027]:610 IC[028]:610 IC[029]:610
IC[030]:580 IC[031]:610 IC[032]:610 IC[033]:610 IC[034]:580 IC[035]:610
IC[036]:610 IC[037]:610 IC[038]:610 IC[039]:580 IC[040]:610 IC[041]:580
IC[042]:610 IC[043]:580 IC[044]:610 IC[045]:580 IC[046]:610 IC[047]:610
IC[048]:580 IC[049]:610 IC[050]:580 IC[051]:610 IC[052]:610 IC[053]:610
IC[054]:580 IC[055]:610 IC[056]:610 IC[057]:580 IC[058]:610 IC[059]:610
IC[060]:580 IC[061]:610 IC[062]:610 IC[063]:580 IC[064]:610 IC[065]:610
IC[066]:610 IC[067]:580 IC[068]:610 IC[069]:610 IC[070]:580 IC[071]:610
IC[072]:610 IC[073]:580 IC[074]:610 IC[075]:610 IC[076]:580 IC[077]:610
2020-01-06 18:23:21 [chain 1]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 4B 54 4C 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A 75 C8 96 13 7C 7C 7C 7C 7C 7C
0x0030 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0040 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0050 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0060 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C
0x0070 7C 7C 7C 7C 7C 7C 7C 7C 30 07 2E 48 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF F5 DF
2020-01-06 18:23:22 fixture_header : 0x1396
2020-01-06 18:23:22 fixture_version : 0x0001
2020-01-06 18:23:22 hash_board_sn : YDFTYH9AIAABB1KTL
2020-01-06 18:23:22 pcb_version : 0x010a
2020-01-06 18:23:22 bom_version : 0x0100
2020-01-06 18:23:22 product_id : 0x01
2020-01-06 18:23:22 board_bin : 0x01
2020-01-06 18:23:22 chip_ft : A4V4
2020-01-06 18:23:22 chip_bin : BIN3
2020-01-06 18:23:22 chip_version : AB
2020-01-06 18:23:22
2020-01-06 18:23:22 miner_header : 0x1396
2020-01-06 18:23:22 work_mode_count : 0x01
2020-01-06 18:23:22 miner_bin : 0x00
2020-01-06 18:23:22 [mode 0]
2020-01-06 18:23:22 voltage : 1840
2020-01-06 18:23:22 ideal_hash_rate : 18478
IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:620 IC[005]:620
IC[006]:620 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:620 IC[011]:620
IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:620 IC[017]:620
IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:620 IC[022]:620 IC[023]:620
IC[024]:620 IC[025]:620 IC[026]:620 IC[027]:620 IC[028]:620 IC[029]:620
IC[030]:620 IC[031]:620 IC[032]:620 IC[033]:620 IC[034]:620 IC[035]:620
IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:620 IC[040]:620 IC[041]:620
IC[042]:620 IC[043]:620 IC[044]:620 IC[045]:620 IC[046]:620 IC[047]:620
IC[048]:620 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:620 IC[053]:620
IC[054]:620 IC[055]:620 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620
IC[060]:620 IC[061]:620 IC[062]:620 IC[063]:620 IC[064]:620 IC[065]:620
IC[066]:620 IC[067]:620 IC[068]:620 IC[069]:620 IC[070]:620 IC[071]:620
IC[072]:620 IC[073]:620 IC[074]:620 IC[075]:620 IC[076]:620 IC[077]:620
2020-01-06 18:23:23 [chain 2]
0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42
0x0010 42 31 4C 34 32 00 00 00 0A 01 00 01 01 01 03 04
0x0020 04 41 42 5A 5A 5A 26 47 96 13 7C 7C 7C 7C 76 76
0x0030 76 7C 7C 7C 76 7C 7C 7C 7C 7C 76 76 7C 7C 7C 76
0x0040 7C 76 7C 7C 76 76 7C 7C 7C 7C 76 7C 76 7C 7C 7C
0x0050 7C 76 76 7C 7C 7C 76 76 7C 7C 76 7C 7C 7C 76 7C
0x0060 76 76 7C 7C 7C 7C 76 7C 7C 76 7C 7C 76 7C 7C 76
0x0070 7C 7C 7C 7C 76 76 7C 7C 30 07 FD 46 00 00 00 00
0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 75 F3
2020-01-06 18:23:24 fixture_header : 0x1396
2020-01-06 18:23:24 fixture_version : 0x0001
2020-01-06 18:23:24 hash_board_sn : YDFTYH9AIAABB1L42
2020-01-06 18:23:24 pcb_version : 0x010a
2020-01-06 18:23:24 bom_version : 0x0100
2020-01-06 18:23:24 product_id : 0x01
2020-01-06 18:23:24 board_bin : 0x01
2020-01-06 18:23:24 chip_ft : A4V4
2020-01-06 18:23:24 chip_bin : BIN3
2020-01-06 18:23:24 chip_version : AB
2020-01-06 18:23:24
2020-01-06 18:23:24 miner_header : 0x1396
2020-01-06 18:23:24 work_mode_count : 0x01
2020-01-06 18:23:24 miner_bin : 0x00
2020-01-06 18:23:24 [mode 0]
2020-01-06 18:23:24 voltage : 1840
2020-01-06 18:23:24 ideal_hash_rate : 18173
IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:590 IC[005]:590
IC[006]:590 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:590 IC[011]:620
IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:590 IC[017]:590
IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:590 IC[022]:620 IC[023]:590
IC[024]:620 IC[025]:620 IC[026]:590 IC[027]:590 IC[028]:620 IC[029]:620
IC[030]:620 IC[031]:620 IC[032]:590 IC[033]:620 IC[034]:590 IC[035]:620
IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:590 IC[040]:590 IC[041]:620
IC[042]:620 IC[043]:620 IC[044]:590 IC[045]:590 IC[046]:620 IC[047]:620
IC[048]:590 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:590 IC[053]:620
IC[054]:590 IC[055]:590 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620
IC[060]:590 IC[061]:620 IC[062]:620 IC[063]:590 IC[064]:620 IC[065]:620
IC[066]:590 IC[067]:620 IC[068]:620 IC[069]:590 IC[070]:620 IC[071]:620
IC[072]:620 IC[073]:620 IC[074]:590 IC[075]:590 IC[076]:620 IC[077]:620
2020-01-06 18:23:24:thread.c:719:create_read_nonce_reg_thread: create thread
2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB
2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[0] = 1
2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[1] = 1
2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[2] = 1
2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a
2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a
2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a
2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-01-06 18:23:28:driver-btm-api.c:1803:bitmain_board_init: Fan check passed.
2020-01-06 18:23:29:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:23:31:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:23:32:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:23:34:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:23:35:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:23:37:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:23:37:thread.c:714:create_pic_heart_beat_thread: create thread
2020-01-06 18:23:39:power_api.c:238:power_init: power type version: 0x0042
2020-01-06 18:23:39:power_api.c:256:power_init: Power init:
2020-01-06 18:23:39:power_api.c:257:power_init: current_voltage_raw = 0
2020-01-06 18:23:39:power_api.c:258:power_init: highest_voltage_raw = 2000
2020-01-06 18:23:39:power_api.c:259:power_init: working_voltage_raw = 1800
2020-01-06 18:23:39:power_api.c:260:power_init: higher_voltage_raw = 1850
2020-01-06 18:23:39:power_api.c:261:power_init: check_asic_voltage_raw = 1800
2020-01-06 18:23:39:driver-btm-api.c:1813:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-01-06 18:23:39:power_api.c:226:power_off: init gpio907
2020-01-06 18:24:11:power_api.c:313:set_to_check_asic_voltage: Set to voltage raw 1800, one step.
2020-01-06 18:24:21:uart.c:69:set_baud: set UART baud to 115200
2020-01-06 18:24:28:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0
2020-01-06 18:24:29:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:24:31:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:24:38:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1
2020-01-06 18:24:39:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:24:41:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:24:48:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2
2020-01-06 18:24:49:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-01-06 18:24:51:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-01-06 18:24:51:driver-btm-api.c:901:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0
2020-01-06 18:25:00:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-01-06 18:25:01:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:25:03:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:25:10:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1
2020-01-06 18:25:11:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:25:13:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:25:20:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2
2020-01-06 18:25:22:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-01-06 18:25:24:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-01-06 18:25:24:driver-btm-api.c:901:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1
2020-01-06 18:25:32:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0
2020-01-06 18:25:33:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:25:35:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:25:42:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1
2020-01-06 18:25:43:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:25:45:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:25:52:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2
2020-01-06 18:25:53:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-01-06 18:25:55:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-01-06 18:25:55:driver-btm-api.c:901:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2
2020-01-06 18:25:56:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT
2020-01-06 18:25:56:driver-btm-api.c:132:stop_mining: stop mining: soc init failed!
2020-01-06 18:25:56:thread.c:764:cancel_read_nonce_reg_thread: cancel thread
2020-01-06 18:25:56:driver-btm-api.c:117:killall_hashboard: ****power off hashboard****
Jump to: