Author

Topic: Newbi First Miner Need Help With Hive OS (Read 99 times)

newbie
Activity: 42
Merit: 0
March 03, 2021, 09:07:54 AM
#5
Are you saying the higher the normal gpu temp the higher the memory temp? I don't believe that pal just because you are running under 60°C temp doesn't mean your memory temp isn't high

Uh, yes.  Do you not understand how fan speeds and GPU heat dissipation works...pal?  My particular card has the same excellent cooler as the 3080/90 version of the Ultra XC3, and the 3070 uses a lot less power to begin with.  On my Sapphire Pulse 5700XT that I have running in another system, I can see the memory temp.  When I reduce the card temp with increased fan speed/open air ventilation, the memory temp drops right away.  I dropped it from 94C to a constant 80C now at 39% fan speed (the Pulse has large fans).  This is simple thermodynamics.  

Do you seriously believe that there's no benefit going from 60C to 44C card temp on the memory Huh  Go ahead and run it at 60C and see how long the card lasts.  I'm not taking stupid chances like that for 3 reasons:  what I paid for it ($629USD), how hard it is to get another card, and the fact that the 30 series is new and nobody has ANY long-term data on how they perform, other than to know that the 3080/90 throttle because of high GDDR6X memory temps (not the same memory as the 3070).
member
Activity: 448
Merit: 18
March 03, 2021, 02:51:39 AM
#4
Hi, I just started mining today with a 3070 Founders edition. Here are my results:





So after watching tons of youtube videos and stuff I have managed to come this far. but I have a few question. First. Is this good for 3070?

2nd, I randomly selected those preset overclock and running with it but what I want is the following. I want my card to be very safe to maybe resell after few years or at least use it for my own gaming, basically I dont want my card to die so I need suggestion to change overlock settings. I want the card not to run very hot, I dont want my fan to get destroyed by keeping it 100% also I don't see any option to limit the temp in hive os like we have in afterburner. Power consumption isn't a big deal to me so you guys can go ham on that as I'm running it on free electricity. So suggest me some good overlock settings with best possible hashrate. Also Im getting a lot of rejected shares so I don't know what went wrong.

3rd, The top right side on first image its saying ethhash its stuck at 60mhs and the chart/curve isn't moving. why?

4th. Why is my gpu is only being used 31%? isn't it suppose to be 100%??

5th how can I see my fan speed? its on auto atm but can I not see it how fast is it in auto?

Sorry to bombard you guys with so many question, I have very little knowledge about these techy things and I created this miner just by watching youtube videos but youtuber doesn't answer everything. Hope you guys can help.

Thank you.

Settings for my EVGA XC3 Ultra 3070 in Afterburner: PL 52%, Core -502, Memory +1150, 124W, fan 55%, 44C GPU temp.  I get 61.2 MH/s, zero rejected shares after 3 weeks running now with PM 5.5c.  This is my main gaming card, so I'm going to baby it.  I wouldn't run it at 60C as you have no idea what the memory temp is.
Are you saying the higher the normal gpu temp the higher the memory temp? I don't believe that pal just because you are running under 60°C temp doesn't mean your memory temp isn't high
newbie
Activity: 42
Merit: 0
March 02, 2021, 10:12:32 PM
#3
Hi, I just started mining today with a 3070 Founders edition. Here are my results:

https://i.imgur.com/hEvBU4e.png

https://i.imgur.com/PcNNAPv.png

So after watching tons of youtube videos and stuff I have managed to come this far. but I have a few question. First. Is this good for 3070?

2nd, I randomly selected those preset overclock and running with it but what I want is the following. I want my card to be very safe to maybe resell after few years or at least use it for my own gaming, basically I dont want my card to die so I need suggestion to change overlock settings. I want the card not to run very hot, I dont want my fan to get destroyed by keeping it 100% also I don't see any option to limit the temp in hive os like we have in afterburner. Power consumption isn't a big deal to me so you guys can go ham on that as I'm running it on free electricity. So suggest me some good overlock settings with best possible hashrate. Also Im getting a lot of rejected shares so I don't know what went wrong.

3rd, The top right side on first image its saying ethhash its stuck at 60mhs and the chart/curve isn't moving. why?

4th. Why is my gpu is only being used 31%? isn't it suppose to be 100%??

5th how can I see my fan speed? its on auto atm but can I not see it how fast is it in auto?

Sorry to bombard you guys with so many question, I have very little knowledge about these techy things and I created this miner just by watching youtube videos but youtuber doesn't answer everything. Hope you guys can help.

Thank you.

Settings for my EVGA XC3 Ultra 3070 in Afterburner: PL 52%, Core -502, Memory +1150, 124W, fan 55%, 44C GPU temp.  I get 61.2 MH/s, zero rejected shares after 3 weeks running now with PM 5.5c.  This is my main gaming card, so I'm going to baby it.  I wouldn't run it at 60C as you have no idea what the memory temp is.
jr. member
Activity: 116
Merit: 4
March 02, 2021, 09:22:51 PM
#2
it seems ok , only 3 invalid shares maybe dial memory back to + 2000 or 2100, the 31% is how fast your fans are runninng, my temps range from 55 to 60, those are core temps, unfortunately on 3060 and 3070 we cant see the top memory temps.
newbie
Activity: 24
Merit: 0
March 02, 2021, 07:16:22 PM
#1
Hi, I just started mining today with a 3070 Founders edition. Here are my results:

https://i.imgur.com/hEvBU4e.png

https://i.imgur.com/PcNNAPv.png

So after watching tons of youtube videos and stuff I have managed to come this far. but I have a few question. First. Is this good for 3070?

2nd, I randomly selected those preset overclock and running with it but what I want is the following. I want my card to be very safe to maybe resell after few years or at least use it for my own gaming, basically I dont want my card to die so I need suggestion to change overlock settings. I want the card not to run very hot, I dont want my fan to get destroyed by keeping it 100% also I don't see any option to limit the temp in hive os like we have in afterburner. Power consumption isn't a big deal to me so you guys can go ham on that as I'm running it on free electricity. So suggest me some good overlock settings with best possible hashrate. Also Im getting a lot of rejected shares so I don't know what went wrong.

3rd, The top right side on first image its saying ethhash its stuck at 60mhs and the chart/curve isn't moving. why?

4th. Why is my gpu is only being used 31%? isn't it suppose to be 100%??

5th how can I see my fan speed? its on auto atm but can I not see it how fast is it in auto?

Sorry to bombard you guys with so many question, I have very little knowledge about these techy things and I created this miner just by watching youtube videos but youtuber doesn't answer everything. Hope you guys can help.

Thank you.
Jump to: