Newbie setup Avalon Asic problems. | Bitcointalksearch.org

ThC420

newbie

Activity: 2

Merit: 0

Quote from: -ck on January 22, 2014, 08:38:11 AM

Speed for 55nm chips should be 1500 and you should have firmware that shows the 55/110nm option so something's horribly wrong with your setup if you're running firmware not designed for it at speeds it doesn't support.

Thanks Mr.Ckolivas, it was very helpfull for me! i was trying 282 and 110nm and connection refused error on the api log, now im running 1400 and 55nm and its mining at 149ghz and 66° celsius because its too hot here in Brazil is summer now... The machine is a Avalon Clone 200Ghz from China, now i will try to reach the 200ghz, you give me da light at the end of tunnel...Thx Ckolivas! Cheesy

Happy mining for all!

studio1one

hero member

Activity: 1218

Merit: 500

BintexFutures

Nice one, pleased to hear it is working well for you.

hotmail6

newbie

Activity: 10

Merit: 0

Well I gave up yesterday morning after I thought I had bricked it.
All done with work for a few days so decided to have another crack at it.
It was the firmware, updated to 20131229. I new I was looking for an image file just wasn't sure where to start.

Linked from https://en.bitcoin.it/wiki/Avalon#20131229

to

http://downloads.canaan-creative.com/software/avalon/20131229/openwrt-ar71xx-generic-tl-wr703n-v1-squashfs-sysupgrade.bin

Thanks for the help guys.

hotmail6

newbie

Activity: 10

Merit: 0

My firmware version is : 20130923

I have downloaded, so how do I go about installing the packages?

hotmail6

newbie

Activity: 10

Merit: 0

Beauty. Thanks ill give it a shot when I get home.

studio1one

hero member

Activity: 1218

Merit: 500

BintexFutures

https://github.com/BitSyncom/cgminer-openwrt-packages

studio1one

hero member

Activity: 1218

Merit: 500

BintexFutures

20131123

hotmail6

newbie

Activity: 10

Merit: 0

Rhito. I'm working nights for the next couple of days so won't get much time on it. I'll have to roll back the firmware. Any idea which revision you have linked above?

studio1one

hero member

Activity: 1218

Merit: 500

BintexFutures

Yup. Firmware is wrong version, for older miner

CGMiner config page should look like this

https://ip.bitcointalk.org/?u=http%3A%2F%2Fi44.tinypic.com%2F6tl5qd.jpg&t=536&c=LcJTTrnYAai3uA

sorry you are going to have to paste the address into your browser because I can't hotlink it.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Speed for 55nm chips should be 1500 and you should have firmware that shows the 55/110nm option so something's horribly wrong with your setup if you're running firmware not designed for it at speeds it doesn't support.

studio1one

hero member

Activity: 1218

Merit: 500

BintexFutures

Miner count needs to be 16 for 200g With avalon 55nm chips but it sounds like a network issue.

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Quote from: hotmail6 on January 22, 2014, 03:21:12 AM

In Australia, just installing team view.

ok cool
send me a PM with the connection info
and i will jump on and have a look
for you.

hotmail6

newbie

Activity: 10

Merit: 0

In Australia, just installing team view.

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Quote from: hotmail6 on January 22, 2014, 03:10:26 AM

Still the same. My status is alive but no blocks accepted.

where are you from ?
do you have team viewer installed ?

hotmail6

newbie

Activity: 10

Merit: 0

Still the same. My status is alive but no blocks accepted.

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

ok try just putting in

us1.EclipseMc.Com:3333

on the first line

hotmail6

newbie

Activity: 10

Merit: 0

https://i.imgur.com/UhDD4kD.jpg

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Quote from: hotmail6 on January 21, 2014, 02:23:12 PM

Stratum+tcp://us1.EclipseMc.Com:3333

Hotmail6

And no password + I have run through this setup enough times that I'm only filling in pool at the moment.

Failover

Chip frequency (set to default 274? I'm at work so not sure)
Miner count 24

Apr allow W:127.0.0.1

--quiet

ok if the info you posted is
right then thats not going to work

any chance you can do a screen shot ?

hotmail6

newbie

Activity: 10

Merit: 0

Stratum+tcp://us1.EclipseMc.Com:3333

Hotmail6

And no password + I have run through this setup enough times that I'm only filling in pool at the moment.

Failover

Chip frequency (set to default 274? I'm at work so not sure)
Miner count 24

Apr allow W:127.0.0.1

--quiet

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

Quote from: hotmail6 on January 21, 2014, 11:33:03 AM

Pool setting?

ok
on the web interface for your miner
there is a section for cgminer setup
what have you got on each line

hotmail6

newbie

Activity: 10

Merit: 0

Pool setting?

pjcltd

legendary

Activity: 1778

Merit: 1003

NodeMasters

what pool setting have you setup ?

hotmail6

newbie

Activity: 10

Merit: 0

I have recently brought an Avalon 200GHz/s. I managed to setup and get started my status is Álive, but I have 0 accepted and 0 rejected with usually about 4 discarded. Also no fan speed and temp feedback.
Ive been trying different IP combinations for a couple of days now with no luck, my gateway is standard 192.168.0.1. I have a DLink DSL-2730B router that it is plugged into.
Has anyone had any similar problems/offer any help?

Topic: Newbie setup Avalon Asic problems. (Read 1877 times)