Good luck.
I've been playing with Arduino Uno and Mini. But would like to get a Mega eventually for one of my projects. Ran out of memory on a project. I hope to get some of the other stuff you were selling too like that 3 axis sensor and lcd screen.
Topic: Now on Bitmit: Arduino (Read 6007 times)
I will be opening my own store. It will be a while though. I will announce it here when it's ready.
Hi,
I haven't been able to buy any thing yet but I hope to be making enough btc soon. With bitmit going down are you going to any other btc store? Although I did see today that bitmit was sold to a new owner so hopefully will be back going soon.
I haven't been able to buy any thing yet but I hope to be making enough btc soon. With bitmit going down are you going to any other btc store? Although I did see today that bitmit was sold to a new owner so hopefully will be back going soon.
It's been a while. Here are some new additions:
Sound sensor
Sound sensor v2
Tilt switch
Reed switch
Buzzer module
Magnetic sensor (Hall effect)
4xAA box
6xAA box
I've also lowered the price on the Uno R3 board.
Sound sensor
Sound sensor v2
Tilt switch
Reed switch
Buzzer module
Magnetic sensor (Hall effect)
4xAA box
6xAA box
I've also lowered the price on the Uno R3 board.
Some peripherals for Arduino Mega:
Mega interface shield.
Mega prototype shield with mini breadboard.
This wrist strap is a must-have when tinkering with electronics:
ESD protection wrist strap.
Mega interface shield.
Mega prototype shield with mini breadboard.
This wrist strap is a must-have when tinkering with electronics:
ESD protection wrist strap.
New boards added today:
Arduino Uno R3. Introductory price only $14.99, free shipping.
Arduino Pro Mini
Arduino Uno R3. Introductory price only $14.99, free shipping.
Arduino Pro Mini
Yes, thank you.
Any way you could get 20k ohm trimmers as well?
Do you mean 20kΩ potentiometers? I'll look into it.
Any way you could get 20k ohm trimmers as well?
The auction is doing great for a buyer, current price $8.10. Quite a catch, with less than 48 hours to go.
I've also just now listed an MMA7361 triple-axis accelerometer:
I've also just now listed an MMA7361 triple-axis accelerometer:
I've started a one-week auction for an Arduino Mega. Starting price: 0.01 USD. Let the bidding begin!
https://www.bitmit.net/en/item/18967-arduino-mega-clone-board-100-compatible-with-usb-cable?ref=1836
https://www.bitmit.net/en/item/18967-arduino-mega-clone-board-100-compatible-with-usb-cable?ref=1836
There's quite some competition in the Arduino business on Bitmit nowadays. I'm continously lowering my prices to stay below the competitors. My aim is to offer the lowest prices on everything Arduino-related. If you see someone offering a lower price (with shipping included), please let me know.
It's been a while... I added this listing today:
18x24 prototype PCB
Great for soldering up small projects
18x24 prototype PCB
Great for soldering up small projects
Todays listings:
40 pin header row, pair of male and female
5-pack of mixed potentiometers, 100Ω - 500kΩ
400-pack of resistors, 1kΩ - 100kΩ
400-pack of resistors, 10Ω - 1MΩ
I also forgot to mention these when I originally listed them:
9g micro servo
5-pack for 12" (300mm) servo extension cords
40 pin header row, pair of male and female
5-pack of mixed potentiometers, 100Ω - 500kΩ
400-pack of resistors, 1kΩ - 100kΩ
400-pack of resistors, 10Ω - 1MΩ
I also forgot to mention these when I originally listed them:
9g micro servo
5-pack for 12" (300mm) servo extension cords
Some new additions today:
16 key keypad
1602 LCD module (this is a standalone module, using the same LCD as the LCD and keypad shield I've previously listed).
8x8 red LED matrix module. Also available in a pack of 10.
16 key keypad
1602 LCD module (this is a standalone module, using the same LCD as the LCD and keypad shield I've previously listed).
8x8 red LED matrix module. Also available in a pack of 10.
This one should be handy for Arduino enthusiasts:
2 AA USB Power bank
You can use it to power and Arduino board. How long the power lasts will of course depend on your application, but I've tried it with an Arduino Nano for several hours, and it hasn't run out yet.
2 AA USB Power bank
You can use it to power and Arduino board. How long the power lasts will of course depend on your application, but I've tried it with an Arduino Nano for several hours, and it hasn't run out yet.
I can list UNO R3 if you want, but it will cost a little more than the R2 I've already listed. The differences aren't that big. What is it about it that makes you want the R3 over the R2?
Will you have Uno R3 anytime soon?
I added two different sets of breadboard jumper wire yesterday:
Pack of 100
Pack of 65, "deluxe"
By the way, you haven't missed my ongoing buy 1 get 1 FREE promotion on Arduino Uno, have you?
Pack of 100
Pack of 65, "deluxe"
By the way, you haven't missed my ongoing buy 1 get 1 FREE promotion on Arduino Uno, have you?
Are there other Arduino-related things you'd like to buy on Bitmit? Please let me know, and I'll do my best to find a supplier.
As I promised, here are some more sensors:
DHT11 Humidity and Temperature sensor
HC-SR04 Ultrasonic Distance Sensor
Also, I forgot to mention this little bugger when I first put it up:
ENC28J60 Ethernet module
DHT11 Humidity and Temperature sensor
HC-SR04 Ultrasonic Distance Sensor
Also, I forgot to mention this little bugger when I first put it up:
ENC28J60 Ethernet module
I added some more breadboards yesterday:
700 points
400 points
240 points
The last type is very modular, you can snap them together in all directions. I'll be adding some more sensors in a couple of days.
700 points
400 points
240 points
The last type is very modular, you can snap them together in all directions. I'll be adding some more sensors in a couple of days.
When available, do you think you can get your hands on the Raspberry Pi?
I'd also be interested in LittleBits too.
I'd also be interested in LittleBits too.
Ghash/Sec ?
Nah, they're not for mining. If you really wanted to, you could probably get a couple of kilohashes per second out of the MEGA. Here's a discussion on Arduino mining: https://bitcointalksearch.org/topic/arduino-miner-9958However, some miners have found use for arduinos to monitor their mining rig: https://bitcointalksearch.org/topic/--7216
Ghash/Sec ?
Nah, they're not for mining. If you really wanted to, you could probably get a couple of kilohashes per second out of the MEGA. Here's a discussion on Arduino mining: https://bitcointalksearch.org/topic/arduino-miner-9958However, some miners have found use for arduinos to monitor their mining rig: https://bitcointalksearch.org/topic/--7216
Ghash/Sec ?
I'm sure I will be able to supply the Due in the future, but it will take a while.
Awesome! Any chance for the Due?
I've added two more shields:
XBee shield
Interface shield
What kind of additional Arduino accessories would you like to buy with bitcoins?
XBee shield
Interface shield
What kind of additional Arduino accessories would you like to buy with bitcoins?
Best of luck on bitmit. I've started to list some of my goods on there as well. Working out well.
can you get your hands on Teensy/Teensy++ modules?
I can't find a supplier right now, but I'll keep my eyes open.
can you get your hands on Teensy/Teensy++ modules?
I've added some more electronics hobbyist listings:
Step motor with drive board
I2C RTC module
Prototype shield
Step motor with drive board
I2C RTC module
Prototype shield
I also offer digital multimeters:
Simple model
Advanced model
A digital multimeter is a great thing to have if you are into electronics as a hobby. Shipping is FREE for all the items listed above.
Simple model
Advanced model
A digital multimeter is a great thing to have if you are into electronics as a hobby. Shipping is FREE for all the items listed above.
I've put up two Arduino boards for sale on Bitmit:
Arduino Uno R2
Arduino Nano v3
The boards are clones, but they are 100% compatible.
Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments. For more information on the Arduino project, go here: http://arduino.cc
Arduino Uno R2
Arduino Nano v3
The boards are clones, but they are 100% compatible.
Arduino is an open-source electronics prototyping platform based on flexible, easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments. For more information on the Arduino project, go here: http://arduino.cc
Jump to: