I've bought one of these off ebay - very cheap from china but the shipping meant it took AGES!
i can only fit 4 USB miners maximum if i offset them - although this does give me capacity for the two USB fans that are going to blow over the chips... i'll upload a pic once i have it in my PC and setup (it arrived yesterday)
Topic: Now on Bitmit: Molex powered USB hub (Read 1980 times)
The whole 8-port hub is 150mm wide. The distance between the USB ports is more than enough for USB Eruptors.
whats the distance between the USB ports on the 8 port? they would need to be atleast 13mm apart i guess?
Thank you. The 4 port hub is 103 mm wide. I don't think it could fit four USB Erupters simultaneously. The 8 port version should work nicely though, as it's wider, like a DVD drive.
just measured mine and they are 25mm across.
I own a ruler, but no USB Erupters, so I can't really be of service myself. Anyone else?
any news on this? i havent been anywhere near mine to measure them...
A quick google came up with this:
http://www.amazon.com/ASICMiner-Block-Erupter-300MH-Sapphire/dp/B00CUJT7TO
Product Dimensions: 3 x 1.4 x 0.5 inches
I'll measure mine when i get home otherwise
http://www.amazon.com/ASICMiner-Block-Erupter-300MH-Sapphire/dp/B00CUJT7TO
Product Dimensions: 3 x 1.4 x 0.5 inches
I'll measure mine when i get home otherwise
3 x 1.4 x 0.5 inches can't be right. Maybe it's the dimensions of the case? 1.4 inches is 35.56 mm. A USB type A plug is 12mm wide, and I estimate from looking at pictures that the whole USB Block Erupter is ~25mm wide.
[]http://www.xakep.ru/post/60830/miner2.jpg[]
i agree
the dimensions seemed a little generous - i'll get better ones this evening A quick google came up with this:
http://www.amazon.com/ASICMiner-Block-Erupter-300MH-Sapphire/dp/B00CUJT7TO
Product Dimensions: 3 x 1.4 x 0.5 inches
I'll measure mine when i get home otherwise
http://www.amazon.com/ASICMiner-Block-Erupter-300MH-Sapphire/dp/B00CUJT7TO
Product Dimensions: 3 x 1.4 x 0.5 inches
I'll measure mine when i get home otherwise
3 x 1.4 x 0.5 inches can't be right. Maybe it's the dimensions of the case? 1.4 inches is 35.56 mm. A USB type A plug is 12mm wide, and I estimate from looking at pictures that the whole USB Block Erupter is ~25mm wide.
alos any ideas what the max rated power draw on the 4 or 8 port is? the USB Block Erupters need 500ma each? so for 8 thats around 4A right?
A quick google came up with this:
http://www.amazon.com/ASICMiner-Block-Erupter-300MH-Sapphire/dp/B00CUJT7TO
Product Dimensions: 3 x 1.4 x 0.5 inches
I'll measure mine when i get home otherwise
http://www.amazon.com/ASICMiner-Block-Erupter-300MH-Sapphire/dp/B00CUJT7TO
Product Dimensions: 3 x 1.4 x 0.5 inches
I'll measure mine when i get home otherwise
I think the miners will fit side by side in the 8 port version, but it might be tight. What are the exact dimensions of a Block Erupter USB?
Will the 8 port fit the usb miners side by side? I thought they were pretty wide. Plus being limited by motherboard USB headers also makes me sadface.
Can anyone recommend some 10+ port usb hubs that are relatively inexpensive? I saw a 49 port but its really expensive, hundreds of dollars. I once bought a 10 port usb hub from china but it was dead on arrival and felt really light and cheap.
Can anyone recommend some 10+ port usb hubs that are relatively inexpensive? I saw a 49 port but its really expensive, hundreds of dollars. I once bought a 10 port usb hub from china but it was dead on arrival and felt really light and cheap.
I like the idea of a 8 port USB hub, via molex, save on the plugs when you need a lot of them.
8 port model:
Please note that this model has a motherboard USB connector. It's great if you want to hook up the hub to a regular PC motherboard, but if you want to use it with a type A USB port you will need to use an adapter. This model is sized to fit in a 3.5" drive bay, a bit larger than the 4 port version.
Please note that this model has a motherboard USB connector. It's great if you want to hook up the hub to a regular PC motherboard, but if you want to use it with a type A USB port you will need to use an adapter. This model is sized to fit in a 3.5" drive bay, a bit larger than the 4 port version.
interested in 8 port version
I've made a separate link now
If there's interest, I could list an 8-port model as well.
If there's interest, I could list an 8-port model as well.
More efficient on powering, but at the same time its only giving you +3 usbs. That's quite an overhead. Good for stacking as well.
Note the picture is the link.
Note the picture is the link.
I've just listed this 4 port USB 2.0 panel hub with molex power connector on Bitmit:
I think this hub can be very useful if you are looking to start mining with USB-powered mining devices. Instead of using one or several inefficient wall-wart power supplies, you can power all your hubs from a single, efficient ATX power supply.
I think this hub can be very useful if you are looking to start mining with USB-powered mining devices. Instead of using one or several inefficient wall-wart power supplies, you can power all your hubs from a single, efficient ATX power supply.
Jump to: